Abstract
All traditional NAH techniques are limited to handle cases where sound sources are only on one side of an array of microphones. The reality is much more complicated however. A typical example is the analysis of noise radiation from a vehicle stationed on the chassis dynamometers inside a semi-anechoic chamber. For safety and durability concerns, the surfaces of the chamber cannot be made as acoustically absorptive as they should be. Consequently, the measured acoustic pressures consist of both direct and reflected waves. Also, the dynamometer is generating its own noise, making NAH application and analysis very difficult. To date, vehicle noise is still analyzed by measuring transfer functions between a source and receiver, or by sweeping an intensity probe over a target source surface at close range. The information obtained is often isolated and valid at the measurement locations. These traditional noise diagnosis and analysis processes cannot reveal much insightful information of the root causes of noise and structural vibrations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
G.H. Golub, M. Heath, G. Wahba, Generalized cross-validation as a method for choosing a good ridge parameter. Technometrics 21, 215–223 (1979)
S.F. Wu, Hybrid nearfield acoustical holography. J. Acoust. Soc. Am. 115(1), 207–217 (2004)
M. Moondra, S.F. Wu, Visualization of vehicle interior noise using HELS based NAH, (CD-ROM), in Proceedings of the INTER-NOISE 2002, August 2002
S.H. Yoon, P.A. Nelson, Estimation of acoustic source strength by inverse methods: part II, experimental investigation of methods for choosing regularization parameters. J. Sound Vib. 233, 669–705 (2000)
L. Landweber, An iteration formula for Fredholm integral equations of the first kind. Am. J. Math. 73, 615–624 (1951)
V.A. Morozov, The error principle in the solution of operational equations by the regularization method. USSR Comput. Math. Math. Phys. 8, 63–87 (1968)
X. Zhao, S.F. Wu, Reconstruction of vibro-acoustic fields by using hybrid nearfield acoustical holography in half space. J. Acoust. Soc. Am. 117, 555–565 (2005)
X. Zhao, S.F. Wu, Reconstruction of vibro-acoustic fields by using hybrid nearfield acoustical holography in half space. J. Acoust. Soc. Am. 117, 555–565 (2005)
X. Zhao, S.F. Wu, Reconstruction of vibro-acoustic fields by using hybrid nearfield acoustical holography in half space. J. Acoust. Soc. Am. 117, 555–565 (2005)
X. Zhao, S.F. Wu, Reconstruction of vibro-acoustic fields by using hybrid nearfield acoustical holography in half space. J. Acoust. Soc. Am. 117, 555–565 (2005)
X. Zhao, S.F. Wu, Reconstruction of vibro-acoustic fields by using hybrid nearfield acoustical holography in half space. J. Acoust. Soc. Am. 117, 555–565 (2005)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer Science+Business Media New York
About this chapter
Cite this chapter
Wu, S.F. (2015). Hybrid NAH. In: The Helmholtz Equation Least Squares Method. Modern Acoustics and Signal Processing. Springer, New York, NY. https://doi.org/10.1007/978-1-4939-1640-5_7
Download citation
DOI: https://doi.org/10.1007/978-1-4939-1640-5_7
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4939-1639-9
Online ISBN: 978-1-4939-1640-5
eBook Packages: EngineeringEngineering (R0)