Abstract
We come now to the ultimate product, be it fiber, plastic, rubber, paint, or whatever, and we wish to consider the product on the level of the whole material, no matter how many phases or how many kinds of molecules it may contain. This is the level of industrial design, of materials engineering, and of practical testing. It is of interest to engineers, technologists, industrial and commercial people, and of course the consumer.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Suggestions for Further Reading
S. Minami, Morphology and mechanical properties of polyacrylonitrile fibers, in Acrylonitrile in Macromolecules (Eli Pearce, ed.), pp. 145–157, ACS Applied Polymer Symposium No. 25, John Wiley and Sons, Inc., New York, N.Y. 10016 (1974).
M. C. Botty, C. D. Felton, and R. E. Anderson, Application of microscopical techniques to the evaluation of experimental fibers, Textile Research J. 30, 959–965 (1960).
L. Boor, Hardness, abrasion, and wear resistance testing of plastics, ASTM Bulletin 244, 43–47 (Feb. 1960).
L. Boor, M. Hanok, F. S. Conant, and W. E. Scoville, Jr., Rheological testing of elastomers at low temperatures, part II, ASTM Bulletin 246, 25–32 (May 1960).
F. W. Reinhart, C. Brown, L. Boor, and J. J. Lamb, Evaluation of the Boor-quartermaster snag tester for coated fabrics and plastic films, ASTM Bulletin 210, 50–59 (Dec. 1955).
L. Boor and S. L. Trucker, An improved fadeometer, ASTM Bulletin 189, 38–43 (Apr. 1953).
L. Boor, Some notes on the effect of testing machines on the tensile properties of plastic films, ASTM Bulletin, 47–53 (Dec. 1949)
L. Boor, J. D. Ryan, M. E. Marks, and W. F. Bartoe, Hardness and abrasion resistance of plastics, ASTM Bulletin,68–73 (Mar. 1947).
L. Boor, Indentation hardness of plastics, Proceedings of the American Society for Testing and Materials 47, 969–991 (1944).
References
ASTM designated standards are in any current Annual Book of ASTM Standards under the part number given in the annual Index to ASTM Standards American Society for Testing and Materials, Philadelphia, Pa. 19103.
ASTM designation D1600, Standard abbreviations of terms relating to plastics, ASTM Standards,part number given in Index,printed annually by the American Society for Testing and Materials, Philadelphia, Pa. 19103.
T. G. Rochow, assigner to American Cyanamid Co. of U.S. Patent 3,345,239, Oct. 3, 1967, Method for producing decorative articles of manufacture, U.S. Patent Office, Washington, D.C. 20231.
W. G. Mullen, Skid resistance and wear properties of aggregates for paving mixtures, Project ERSD–110–69–1, Highway Research Program, N.C. State University, P.O. Box 5993, Raleigh, N.C. 27607 (1972).
E. A. Blair, Cell structure and physical properties of elastomeric cellular plastics, in Resinography of Cellular Plastics (R. E. Wright, ed.), ASTM Special Technical Publication 414, pp. 84–95, American Society for Testing and Materials, Philadelphia, Pa. 19103, (1967).
R. H. Harding, morphologies of cellular materials, in Resinography of Cellular Plastics (R. E. Wright, ed.), ASTM Special Technical Publication 414, pp. 3–18, American Society for Testing and Materials, Philadelphia, Pa. 19103 (1967).
G. F. Baumann, S. J. Aulabaugh, and S. Steingiser, Investigation of urethane foam formation by motion-picture photography, in Resinography of Cellular Plastics (R. E. Wright, ed.), ASTM Special Technical Publication 414, 68–83, American Society for Testing and Materials, Philadelphia, Pa. 19103 (1967).
D. Cannell, Paint, in Kirk-Othmer Encyclopedia of Chemical Technology, 2nd ed., Vol. 14, pp. 462–485, Interscience Div., John Wiley and Sons, Inc., New York, N.Y. 10016 (1967).
G. E. F. Brewer, Electrodeposition of Coatings, in Encyclopedia of Polymer Science (H. F. Mark, ed.), Vol. 15, pp. 178–191, Interscience Div., John Wiley and Sons, Inc., New York 10016 (1971).
Clauser, H. R., Advanced composite materials, Scientific American 229, 36–44 (July 1973).
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 1976 Plenum Press, New York
About this chapter
Cite this chapter
Rochow, T.G., Rochow, E.G. (1976). Level IV: Materials. In: Resinography. Springer, Boston, MA. https://doi.org/10.1007/978-1-4684-0751-8_6
Download citation
DOI: https://doi.org/10.1007/978-1-4684-0751-8_6
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4684-0753-2
Online ISBN: 978-1-4684-0751-8
eBook Packages: Springer Book Archive