Abstract
A transient hot-wire technique was applied to examine the influence of the Coriolis effect on heat transfer on a centrifuge. A thermal conductivity measurement facility, once flown on board the TEXUS-24 rocket, was set on the 7.25 m rotating arm of the centrifuge. The temperature increase of the sensing wire, which was on a solid state substrate immersed in mercury, depended not only on input power and rotational acceleration but also on the orientation of the specimen. The temperature increase was affected by the Coriolis force, depending on the orientation: enhancement or suppression of heat transfer from the wire by convection.
*
On leave from NEC Corporation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
S. Nakamura, T. Hibiya, F. Yamamoto, and T. Yokota, Measurement of the thermal conductivity of molten InSb under microgravity, Thermophys. 12:783 (1991).
S. Nakamura and T. Hibiya, Measurement of the thermal conductivity of molten InSb in a drop shaft, in: “Proceedings of the 8th European Symposium on Materials and Fluid Sciences under Microgravity,” Brussels (1992), p. 233.
F. Yamamoto, S. Nakamura, T. Hibiya, T. Yokota, D. Grothe, H. Harms, and P. Kyr, Developing a measuring system for thermal conductivity using transient hot-wire method under microgravity, in: “Proceedings of the CSME Mechanical Engineering Forum,” Toronto (1990), p. 1.
S. Nakamura, T. Hibiya, and F. Yamamoto, Effect of convective heat transfer on thermal conductivity measurements under microgravity using a transient hot-wire method, Microgravity Sci. & Technol. 5:156 (1992).
G. Müller, E. Schmidt, and P. Kyr, Investigation of convection in melts and crystal growth under large inertial acceleration, J. Cryst. Growth 49:387 (1980).
W. Weber, G. Neumann, and G. Müller, Stabilizing influence of the Coriolis force during melt growth on a centrifuge, J. Cryst. Growth 100:145 (1990).
H. Rodot, L.L. Regel, G.V. Sarafanov, M. Hamidi, I.V. Videskii, and A.M. Turtchaninov, Cristaux de tellurure de plomb elaborés en centrifugeuse, J. Cryst. Growth 79:77 (1986).
N. Ramachandran, J.P. Downey, P.A. Curreri, and J.C. Jones, Numerical modeling of crystal growth on a centrifuge for unstable natural convection configurations, J. Cryst. Growth 126:655 (1993).
E. Takegoshi, S. Imura, Y. Hirasawa, and T. Takeda, A method of measuring the thermal conductivity of solid materials by transient hot-wire method of comparison, Bull. JSME 25:395 (1982).
K.-W. Yi, S. Nakamura, T. Hibiya, and K. Kakimoto, The effect of the Coriolis force on the fluid flow in centrifuge, in: “30th National Heat Transfer Symposium of Japan,” E342, Yokohama (May 1993), p. 988.
K.-W. Yi, S. Nakamura, T. Hibiya, and K. Kakimoto, The numerical study of the Coriolis force on the fluid flow and heat transfer due to wire heating on centrifuge, Int. J. Heat Mass Transfer (in press).
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 1994 Springer Science+Business Media New York
About this chapter
Cite this chapter
Hibiya, T., Nakamura, S., Yi, KW., Kakimoto, K. (1994). Coriolis Effect on Heat Transfer Experiment using Hot-Wire Technique on Centrifuge. In: Regel, L.L., Wilcox, W.R. (eds) Materials Processing in High Gravity. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-2520-2_17
Download citation
DOI: https://doi.org/10.1007/978-1-4615-2520-2_17
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-6073-5
Online ISBN: 978-1-4615-2520-2
eBook Packages: Springer Book Archive