Abstract
Following capture and separation of CO2 from a gas mixture, the CO2 must be compressed for transport, regardless of whether it is destined for storage in underground geologic reservoirs or used as a feedstock in chemical processing, aggregate formation, or EOR. There are various modes of transport such as rail, ship, truck, and pipeline. On average, a single 500-MW coal-fired power plant would need to transport on the order of 2–3 Mt per year of compressed CO2, which makes pipeline transport a feasible option due to the potential large-scale application (Energy Conv Manag 45(15–16):2343–2353, 2004). For instance, the installed capacity in the U.S. is approximately 315 gigawatts (GW) (EIA Existing Electric Generating Units by Energy Source; Energy Information Administration (EIA), Department of Energy (DOE): Washington, D.C., 2008), China’s installed capacity of coal-fired power is approximately 600 GW and India’s approximately 100 GW. The installed capacity in China and India will undoubtedly grow since as of 2009 these regions had populations of 186 million (China and East Asia) and 612 million (South Asia) without electricity (World Energy Outlook. Accessed August 13, 2011). China, U.S., and India are the top three coal producers, with production of 2716, 993, and 484 million tons produced in 2008, respectively (World Energy Outlook. Accessed August 13, 2011). With this heavy reliance on coal for advancing electrification in these regions, there will be an inevitable increase in CO2 emissions. Mitigation of CO2 via carbon capture will require CO2 transport. This chapter focuses on the compression and transport of CO2 after capture.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Based on original material by Dresser-Rand and Ingersoll-Rand as reported in A Practical Guide to Compressor Technology, 2nd Ed., 2006, John Wiley & Sons, Inc.
McCoy ST, Rubin ES (2008) An engineering-economic model of pipeline transport of CO2 with application to carbon capture and storage. Int J. Greenh. Gas Control, 2(2):219–229 (with permission from Elsevier)
Bliss K, Eugene D, Harms RW, Carrillo VG, DCoddington K, Moore M, Harju J, Jensen M, Botnen L, Marston PM, Louis D, Melzer S, Dreschsel C, Moody J, Whitman L (2010) Amann, R. (ed), A policy, legal, and regulatory evaluation of the feasibility of a national pipeline infrastructure for the transport and storage of carbon dioxide. Interstate Oil and Gas Compact Commission, Oklahoma City, OK
Goos E, Riedel U, Zhao L, Blum L (2011) Phase diagrams of CO2 and CO2-N2 gas mixtures and their application in compression processes. Energy Procedia, 3778–3785 (with permission from Elsevier)
Svensson R, Odenberger M, Johnsson F, Strömberg L (2004) Transportation systems for CO2-application to carbon capture and storage. Energy Convers Manag 45(15–16):2343–2353
EIA (2008) Existing electric generating units by energy source; Energy Information Administration (EIA). Department of Energy (DOE), Washington, D.C.lt;
World Energy Outlook (2009) International Energy Agency, Access to Electricity. (accessed August 13, 2011)
Zhang ZX, Wang GX, Massarotto P, Rudolph V (2006) Optimization of pipeline transport for CO2 sequestration. Energy Convers Manag 47(6):702–715
Amrollahi Z, Ertesvag IS, Bolland O (2011) Thermodynamic analysis on post-combustion CO2 capture of natural-gas-fired power plant. Int J Greenh Gas Control 5:422–426
McCoy ST (2008) The economics of CO2 transport by pipeline and storage in saline aquifers and oil reservoirs. Carnegie Mellon University, Pittsburgh PA, Thesis (PhD)
Reid RC, Prausnitz JM, Poling BE (1987) The properties of gases and liquids, 4th edn. McGraw Hill Book Co., New York, NY, p 598
Skovholt O (1993) CO2 transportation system. Energy Convers Manag 34(9–11):1095–1103
Bloch HP (2006) A practical guide to compressor technology. Wiley-Interscience, Hoboken, NJ
(a) van der Sluijs J, Hendriks C, Blok K (1992) Feasibility of polymer membranes for carbon dioxide recovery from flue gases. Energy Convers Manag 33(5–8):429–436;(b) Favre E (2007) Carbon dioxide recovery from post-combustion processes: can gas permeation membranes compete with absorption? J Membrane Sci 294(1–2):50–59
Haslbeck JL, Black J, Kuehn N, Lewis E, Rutkowski MD, Woods M, Vaysman V (2008) Volume 1: Bituminous Coal to Electricity; National Energy Technology Laboratory (NETL). U.S. Department of Energy, p 315
Moore JJ, Nored MG, Gernentz RS, Brun K (2007) Novel concepts for the compression of large volumes of Carbon Dioxide. Oil Gas J
Lawlor SP, Baldwin P (2005) In: Conceptual design of a supersonic CO2 compressor. ASME TURBO EXPO 2005, June 6–9, 2005, Reno NV
Metz B (2005) IPCC special report on carbon dioxide capture and storage. Cambridge University Press, Cambridge, p 431
Dooley JJ, Dahowski RT, Davidson CL (2009) Comparing existing pipeline networks with the potential scale of future US CO2 pipeline networks. Energy Procedia 1(1):1595–1602
EIA (2007) About U.S. natural gas pipelines – transporting natural gas; Energy Information Administration. U.S. Department of Energy, Washington, DC, p 76
Zigrang DJ, Sylvester ND (1982) Explicit approximations to the solution of Colebrook’s friction factor equation. AIChE J 28(3):514–515
Green DW (eds) (2008) Perry’s chemical engineers’ handbook. McGraw-Hill, New York
Farris C (1983) Unusual design factors for supercritical CO2 pipelines. Energy Progress 3(3):150–158
Goos E, Riedel U, Zhao L, Blum L (2011) Phase diagrams of CO2 and CO2-N2 gas mixtures and their application in compression processes. Energy Procedia 4:3778–3785
Mohitpour M, Golshan H, Murray MA (2007) Pipeline design & construction: a practical approach. ASME Press, New York
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2012 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Wilcox, J. (2012). Compression and Transport of CO2 . In: Carbon Capture. Springer, New York, NY. https://doi.org/10.1007/978-1-4614-2215-0_2
Download citation
DOI: https://doi.org/10.1007/978-1-4614-2215-0_2
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4614-2214-3
Online ISBN: 978-1-4614-2215-0
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)