Abstract
The purpose of an occupational health organization is to protect the workers at the workplace (Frostling et al., 1981). Currently, the efforts are mainly preventive. The scope of occupational hygiene activities at a workplace is to identify, evaluate and control such environmental factors and stresses that might cause adverse health effects. The resources must be socially and economically acceptable. Thus, the feasibility of possible strategies includes their practical application: how they can be exercised at the workplace. Relatively modest scientific precision is accepted. However, if the programs are systematized, they also can make valuable contributions to research and development within the field of occupational health.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Akselsson, K.R., 1984, Aerosol sampling and samplers matched to PIXE analysis, Nucl.Inst. Methods Phys. Res., 231: 425–430.
Atherley, G., 1985, A critical review of time-weighted average as an index of exposure and dose, and of its key elements, Am. Ind. Hyg. Assoc. J., 46: 481–487.
Birkner, L.R., Saltzman, L.S., 1986, Assessing exposure control strategy cost effectiveness, Am. Ind. Hyg. Assoc. J., 47: 50–54.
Bohgard, M., 1983, “Particle Induced X-Ray Emission Analysis and Complementary Techniques for Examination of Aerosols in the Environment of Industrial Workers,” Diss. Lund.
Breslow, L., Somers, A.R., 1977, The lifetime health-monitoring program—A practical approach to preventive medicine, N. Engl. J. Med., 22: 558–592.
Buffler, P.A., and Aase, J.M., 1982, Genetic risks and environmental surveillance. Epidemiological aspects of monitoring industrial populations for environmental mutagens, J. Occup. Med., 24: 305–314.
Conibear, S.A., and Carnow, B.W., 1978, “Assessment of Exposure and Risk Through Use of a Personal, Cumulative Organ Risk Index,” X IX Int. Cong. Occup. Hlth., Dubrovnik.
Corn, M., and Esmen, N.A., 1979, Workplace exposure zones for classification of employee exposures to physical and chemical agents, Am. Ind. Hyg. Assoc. J., 40: 47–57.
Corn, M., 1983, Regulations, standards and occupational hygiene within the USA in the 1980s, Ann. Occup. Hyg., 27: 91–105.
Crutchfield, C.D., 1981, Managing occupational safety and health programs—An user view, Am. Ind. Hyg. Assoc. J., 42: 226–228.
DiNardi, S.R., Ludwig, J.F., Tartaglia, M.S., and Abromovitz, M.S., 1984, A systems approach to the monitoring of indoor air pollutants, Indoor Air, 4: 180 (Swedish Council for Building Research, Stockholm).
Farkas, I., and Gilad, A., 1982, “Integrated Monitoring of Exposure to Selected Chemicals and Their Health Effects,” I.D. 8 WHO, Copenhagen.
Friberg, L., 1982, Integrated monitoring for health risk assessment, Environ. Monit. Assess., 2: 7–13.
Friberg, L., 1985, The rationale of biological monitoring of chemicals—with special reference to metals, Am. Ind. Hyg. Assoc. J., 46: 633–642.
Frostling, H., Gerhardsson, G., Masreliez, N., and Sandberg, C.G., 1981, “Company Health Services in Sweden,” SAF, Stockholm.
Gamble, J., and Spirtas, R., 1976, Job classification and utilization of complete work histories in occupational epidemiology, J. Occup. Med., 18: 399–404.
Gerhardsson, G., 1983a, “Air Pollutants at Workplaces: Emission Control,” O.H.S.I., SAF, Stockholm.
Gerhardsson, G., 1983b, Aerosols, in: “Encyclopedia of Occupational Health and Safety,” Vol. 1:62–65, IL07 Geneva.
Gerhardsson, G., 1985a, “Health, Safety and Environmental Aspects of Selenium and Tellurium in Industry,” O.H.S.8., SAF, Stockholm.
Gerhardsson, G., 1985b, “Health Hazards in the Technical Environment of the Future,” O.H.S.10., SAF, Stockholm.
Guidotti, T.L., 1983, Adaptation of the lifetime health monitoring concept to defined employee groups not at exceptional risk, J. Occup. Med., 25: 731–736.
Hassler, E., 1983, “Exposure to Cadmium and Nickel in an Alkaline Battery Factory—As Evaluated from Measurements in Air and Biological Material,” Diss. Stockholm.
Hansson, H.-Ch., and Nyman, S., 1985, Microcomputer controlled two-size fractionating aerosol sampler for outdoor environments, Environ. Sci. Technol., 19: 1110 - 1115.
Hong-Kou, L., and Malmquist, K.G., 1985, Hair analysis using proton induced X-ray emission techniques, Sci. Tot. Environ., 42: 213–217.
ILO/WHO Joint Committee, 1981, “Education and Training in Occupational Health, Safety and Ergonomics,” T.R.S., 663, Geneva.
Johansson, E.M. and Johansson, S.A.E., 1984, PIXE analysis of water at the parts per trillion level, Nucl. Inst. Methods Phys. Res., 231: 154–157.
Kahn, H., 1985, Research results of Soviet scientists in some problems of occupational medicine, Scand. J. Work. Environ. Hlth., 11: 241–248.
Keane, J.W., 1984, “Computer-Based Occupational Health Management,” X XI Int. Congr. Occup. Hlth., Dublin.
Koizumi, A., Sekiguchi, T., Konno, M., and Ikeda, M., 1980, Evaluation of the time weighted average of air contaminants with special references to concentration fluctuation and biological half-time, Am. Ind. Hyg. Assoc. J., 41: 693–699.
Lauwerys, R., and Bernard, A., 1985, La surveillance biologique de l’exposition aux toxiques industriels: Position actuelle et perspectives de developement, Scand. J. Work. Environ. Hlth., 11: 155–164.
Leidel, N.A., Busch, K.A., and Lynch, J.R., 1977, “NIOSH Occupational Exposure Sampling Strategy Manual,” Washington, DC.
Maenhut, W., and Ren, L.D., 1981, Trace element analysis of biological materials: Complementarity of PIXE and NAA, JEEE Trans. Nucl. Sci., NS-28: 1386–1391.
McCarty, S., Colombe, S.D. and Spengler, J.D., 1984, Indoor and outdoor aerosols: A multivariate approach to source identification, Indoor Air, 2: 195–200 (Swedish Council for Building Research, Stockholm).
McCawley, M.A., 1984, Performance considerations for size-selective samplers, Ann. Am. Conf. Ind. Hyg., 11: 97–100.
Miller, F.J., Gardner, D.E., Graham, J.A., Lee, R.E., Wilson, W.E., and Bachman, J.D., 1979, Size considerations for establishing a standard for inhalable particle, J. Air. Contr. Assoc., 29: 610–615.
Mutchler, J.E., 1970, Industrial hygiene engineering and the process-environment system, Am. Ind. Hyg. Assoc. J., 31:233–239.
Neustadter, H.E., Fordyce, J.S., and King, R.B., 19/b, Elemental composition of airborne particulates and source identification: Data analysis techniques, J. Air Poll. Contr. Assoc., 26: 1079–1084.
Niren, N.L. and Rector, H.E., 1984, Important design considerations for residential indoor air quality studies, Indoor Air, 5: 521 (Swedish Council for Building Research, Stockholm)
Ozkaynak, H., Ryan, P.B., Spengler, J.D., and Laird, N.M., 1984, Bias due to misclassification of personal exposure in epidemiologic studies of indoor and outdoor air pollution, Indoor Air, 3: 377–384 (Swedish Council for Building Research, Stockholm).
Pershagen, G., Lind, B., and Bjorklund, N.-E., 1982, Lung retention and toxicity of some inorganic arsenic compounds, Environ. Res., 29: 425–434.
Re, M., 1985, Microcomputer programs for the evaluation of predictable long-term exposure, Am. Ind. Hyg. Assoc. J., 46: 369–371.
Roach, S.A., 1966, A more rationale basis for air sampling programs, Am. Ind. Hyg. Assoc. J., 27: 1–12.
Samuels, J.S., Lemasters, G.K., and Carson, A., 1985, Statistical methods for describing occupational exposure measurements, Am. Ind. Hyg. Assoc. J., 46: 427–433.
Seifert, B., Drews, M., and Aurand, K., 1984, Indoor heavy metal exposure of the population around a secondary lead smelter, Indoor Air, 2: 177–182 (Swedish Council for Building Research, Stockholm)
Smith, R.G., 1985, Occupational health standard setting in the United States, Am. Ind. Hyg. Assoc. J., 46: 541–546.
Soto, R.J., Kalan, D.A., Christomo, B., Falbo, L.L., Groh, W.J., Smith, L.W., and Steward, R.D., 1983, Data base management system for tracking occupational health, Am. Ind. Assoc. J., 44: 389–394.
Stern, R.M., 1980, Production and characterization of a reference standard welding fume, Int. Inst. Welding, VIII: 861–880.
Stuart, B.O., Lioy, P.J., and Phalen, R.F., 1984, Use of size-selection in establishing TLVs, Ann. Am. Conf. Ind. Hyg., 11: 85–96.
Toca, F.M., 1981, Program evaluation: Industrial hygiene, Am. Ind. Hyg. Assoc. J., 42: 214.
Ungers, L.J., Moskowitz, P.D., Owens, T.W., Harmon, A.D., and Briggs, T.M., 1982, Methodology for an occupational risk assessment: An evaluation of four processes for the fabrication of photovoltaic cells, Am. Ind. Hyg. Assoc. J., 43: 73–79.
Wallace, L.A., and Ott, W.R., 1982, Personal monitors: A state-of-the-art survey, J. Air Poll. Contr. Assoc., 32: 601–610.
Weil, C.S., 1984, Some questions and opinions on issues in toxicology and risk assessment, Am. Ind. Hyg. Assoc. J., 45: 663–670.
WHO/ILO Expert Committee, 1977, “Methods Used in Establishing Permissible Levels in Occupational Exposure to Harmful Agents,” TRS 601, WHO, Geneva.
WHO Study Group, 1980, “Recommended Health-Based Limits in Occupational Exposure to Heavy Metals,” TRS 647, WHO, Geneva.
WHO Experts Committee, 1981, “Health Effects of Exposures in the Work Environment,” TRS 662, WHO, Geneva.
WHO Meeting, Kiev, 1982, “Delayed and Chronic Effects of Chemicals in the Workplace,” EURO Reports and Studies 64, WHO, Copenhagen.
Widmer, H.M., Erard, J.-F., and Grass, G., 1984, Automated monitor systems for the continuous surveillance of environmental samples, Intern. J. Environ. Anal. Chem., 18: 1–10.
Wood, J.D., and Birkett, J.L., 1979, External air flow effects on personal sampling, Ann. Occup. Hyg., 22: 299–310.
Wright, C.C., 1982, Cost containment through health promotion programs, J. Occup. Med., 24: 965–968.
Yocom, J.E., 1982, Indoor-outdoor air quality relationships, J. Air Poll. Contr. Assoc., 32: 500–520.
Zhang, J., Billiet, J., and Dams, R., 1981, Stationary sampling and chemical analysis of suspended particulate matter in the workplace, Staub-Reinhalt der Luft, 41: 381–386.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1988 Plenum Press, New York
About this chapter
Cite this chapter
Gerhardsson, G. (1988). The Need and Feasibility of Environmental and Biological Monitoring in Occupational Health. In: Clarkson, T.W., Friberg, L., Nordberg, G.F., Sager, P.R. (eds) Biological Monitoring of Toxic Metals. Rochester Series on Environmental Toxicity. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-0961-1_3
Download citation
DOI: https://doi.org/10.1007/978-1-4613-0961-1_3
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-306-42809-8
Online ISBN: 978-1-4613-0961-1
eBook Packages: Springer Book Archive