Abstract
A heart scanner based on high-Tc SQUIDs is under development. It should be used in standard clinical environments without magnetically shielded room. Because the scanner should be simple to use, the SQUIDs will be cooled by small cryocoolers thus realizing a turn-key apparatus. The aimed field resolution is 0.05 pT/√Hz, requiring an extremely stable temperature (fluctuations in the mK-range and drift below 0.1 mK/s). The mechanical cooler interference is reduced by incorporating two coolers and operating them in counter phase. The magnetic cooler interference is reduced by positioning the coolers and the SQUIDs in a coplanar arrangement, and by separating the SQUIDs from the cold tips with a solid conducting thermal interface. A design is presented in which a temperature of 55 K is expected with a cool-down time of less than 1 hour.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
G. Walker and E.R. Bingham, “Low Capacity Cryogenic Refrigerators” Oxford University Press (1994).
H. Rogalla, Superconducting electronics, Cryogenics 34 ICEC:25 (1994).
J.W.M. Hilgenkamp, High-Tc dc SQUID magnetometers, Ph.D. thesis, University of Twente, Enschede (1995).
H.J.M. ter Brake et al., Design of a high-Tc SQUID based heart scanner, European Conf. on Appl. Supercond. EUCAS ’95, Edinburgh 3 – 6 July 1995.
W.A.M. Aarnink et al., Temperature dependence of the effective pick-up area of high-Tc dc SQUIDs; implications for stabilization of the SQUID operating temperature, submitted to Appl. Physics Lett.
R.G. Scurlock, private communication.
R.R. Clappier and R.J. Kline-Schoder, Adv. Cryogenic Eng 39B:1177 (1994).
D. Verbeek et al., Performance of the Signaal Usfa Stirling cooling engines, Proc. 7th Int. Cryocooler Conf. Santa Fe 1992 (1993) p. 728.
T. Varpula and T Poutanen, J. Appl. Phys. 55:4015 (1984).
N. Kasai et al., Cryogenics 33:175 (1993).
J.A. Overweg and M.J. Walter-Peters, Cryogenics 18:529 (1978).
N. Khare and P. Chaudhari, Appl Phys. Lett. 65:2353 (1994).
H.J.M. ter Brake et al., Adv. Cryogenic. Eng. 39:1287 (1994).
R.H. Koch et al., Appl. Phys. Lett. 65:100 (1994).
J.F.C. Verberne et al., Reduction of the vibrations generated by Stirling cryocoolers for cooling a high-Tc SQUID magnetometer, in: “Cryocoolers 8”, proc. 8th Int. Cryocooler Conf. Vail USA 1994, R.G. Ross ed., Plenum Press New York (1995) p. 465.
P.J. van den Bosch et al., Cryogenics 35:109 (1995).
H.J.M. ter Brake and J. Flokstra, Computer aided cryostat design at Twente: recent developments, proc. 12th Int. Cryogenic Eng. Conf., Southampton 1988 p.88.
W.H. Press et al., “Numerical Recipes”, Cambridge University Press (1986).
H.J.M. ter Brake et al., The application of small Stirling-type cryocoolers in a heart scanner based on superconducting magnetic sensors, 19th Int. Congress of Refrigeration, The Hague The Netherlands, August 20–25 1995.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1996 Plenum Press, New York
About this chapter
Cite this chapter
ter Brake, H.J.M. et al. (1996). Design of a High-Tc Squid Based Heart Scanner Cooled by Small Stirling Coolers. In: Kittel, P. (eds) Advances in Cryogenic Engineering. A Cryogenic Engineering Conference Publication, vol 41. Springer, Boston, MA. https://doi.org/10.1007/978-1-4613-0373-2_10
Download citation
DOI: https://doi.org/10.1007/978-1-4613-0373-2_10
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4613-8022-1
Online ISBN: 978-1-4613-0373-2
eBook Packages: Springer Book Archive