Abstract
This chapter will introduce the reader to a set of standards, best practices and management models that have been considered for the elaboration of the following Sections of this book. Obviously we cannot build our framework from zero, there are very relevant references in previous works, good practices and successful stories that we can consider when designing a framework for network utilities maintenance.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abraham DM, Wirahadikusumah R, Short TJ, Shahbahrami S (1998) Optimization modeling for sewer network management. J Constr Eng Manage 124(5):402–410
Abudayyeh O, Khan T, Yehia S, Randolph D (2005) The design and implementation of a maintenance information model for rural municipalities. Adv Eng Softw 36(8):540–548
Al-Arfaj K, Dahal K, Azaiez MN (2007) Maintenance cost models in deregulated power systems under opportunity costs. In: Proceedings of the IASTED international conference on energy and power systems, pp 284–291
Amador J, Domínguez J (2005) Application of geographical information systems to rural electrification with renewable energy sources. Renew Energy 30(12):1897–1912
Beehler ME (1997) Reliability centered maintenance for transmission systems. IEEE Trans Power Del 12(2):1023–1028
Black UD (1995) Network management standards. McGraw Hill
Brown RE, Humphrey BG (2005) Asset management for transmission and distribution. IEEE Power Energy Mag 3(3):39–45
Brown RE, Willis HL (2006) The economics of aging infrastructure. IEEE Power Energy Mag 4(3):36–43
Butler KL (1996) Expert system based framework for an incipient failure detection and predictive maintenance system. In: Proceedings of the international conference on intelligent systems applications to power systems, ISAP, pp 321–326
Campbell JD (1995) Outsourcing in maintenance management: A valid alternative to self-provision. J Qual Maint Eng 1(3):18–24
Campbell JD (2001) Organización y liderazgo del mantenimiento. TGP Hoshin, Madrid
Champy J (1995) Reengineering Management. Harper Collins, London
Choi Y, Yun J, Kim H, Choi C, Lee K (2008) On-line condition monitoring and diagnostics of power distribution equipment. In: Proceedings of 2008 international conference on condition monitoring and diagnosis, CMD art no 4580379, pp 692–695
Cholasuke C, Bhardwa R, Antony J (2004) The status of maintenance management in UK manufacturing organisations: results from a pilot survey. J Qual Maint Eng 10(1):5–15
Chrissis MB, Konrad M, Shrum S (2003) CMMI®: guidelines for process integration and product improvement. Addison Wesley, Menlo Park, ISBN: 0-321-15496-7
Capability Maturity Model Integration (CMMI) (2007) CMMI® for development, version 1. CMMI-DEV, V1.2, CMU/SEI-2006-TR-008, ESC-TR-2006-008. Software engineering institute
CMMI-SVC, V1.2 (2009) CMMI for services, Version 1.2-improving processes for better services. CMMI product team. Tech Rep
COBIT, Control objectives for information and related technology (1992) objetivos de control para la información y tecnologías relacionadas. Asociación para la auditoría y control de sistemas de información, (ISACA, information systems audit and control Association), y el instituto de administración de las tecnologías de la información (ITGI, IT Governance Institute)
Crespo Marquez A (2007) The maintenance management framework. Models and methods for complex systems maintenance. Londres, Reino Unido. Springer
Duffuaa SO, Raouf A, Campbell JD (2000) Planning and control of maintenance systems. Wiley, Indianapolis
EFQM (2006) EFQM Framework for management of external resources. By EIPM–EFQM
Endrenyi J, Aboresheid S, Allan RN, Anders GJ, Asgarpoor S, Billinton R, Chowdhury N, Dialynas EN, Fipper M, Fletcher RH, Grigg C, McCalley J, Meliopoulos S, Mielnik TC, Nitu P, Rau N, Reppen ND, Salvaderi L, Schneider A, Singh C (2001) The present status of maintenance strategies and the impact of maintenance on reliability. IEEE Trans Power Syst 16(4):638–646
Enhanced Telecom Operations Map (eTOM) (2007) eTOM solution suite (GB921) release 7.0. TeleManagement forum [TMForum]
Fritz B (1968) NATO software engineering conference. Garmisch, 7–11 Oct. http://homepages.cs.ncl.ac.uk
Geisler KI, Neumann SA, Nielsen TD, Bower PK, Hughes BA (1990) Generalized information management system applied to electrical distribution. IEEE Comput Appl Power 3(3):9–13
Georges JP, Remes A, Jämsä-Jounela SL (2006) Networked equipment automation for industrial processes. In: Proceedings of the 2nd NeCSTworkshop
Goodfellow JW (2000) Applying reliability centered maintenance (RCM) to overhead electric utility distribution systems. In: Proceedings of the IEEE power engineering society transmission and distribution conference, vol 1 pp 566–569
Hassanain MA, Froese TM, Vanier DJ (2001) Development of a maintenance management model based on IAI standards. Artif Intell Eng 15(2):177–193
Hausladen I, Bechheim C (2004) E-maintenance platform as a basis for business process integration. In: Proceedings of INDIN04, 2nd. IEEE international conference on industrial informatics, Berlin, pp 46–51
Hoover JB (2000) Changing world of power monitoring. INTELEC Int Telecommun Energy Conf Proc, pp 103–108
Hoskins RP, Brint AT, Strbac G (1999) a structured approach to asset management within the electricity industry. Utilities Policy 7(4):221–232
Huang X, Zhang L, Shu J, Mo X (2007) Maintenance schedule optimization model in distribution systems. Dianli Xitong Zidonghua/Autom Electr Power Syst 31(1):33–37
IEEE (1990) Standard computer dictionary: A compilation of IEEE standard computer glossaries. Institute of electrical and electronics engineers (IEEE), IEEE Std 610-1990
Ishikawa K (1985) What is total quality control? Prentice-Hall Inc., Englewood Cliffs
ISO10040 (1992) Information processing—open system interconnection—system management overview. International standards for business, Government and Society (http://www.iso.org)
ISO15745 (2003) Industrial automation systems and integration—open systems application integration framework. www.iso.org
ISO18435 (2008) Industrial automation systems and integration—diagnostics, capability assessment, and maintenance applications integration. International standards for business, Government and Society.http://www.iso.org
ISO62264 (2007) Enterprise-control system integration. International standards for business, Government and Society. http://www.iso.org
ISO9001 (2008) Quality management systems-requirements. International standards for business, Government and Society. http://www.iso.org
ISO13374 (2003) Condition monitoring and diagnostics of machines-data processing, communication and presentation, Part 1. General Guidelines, TC 108/SC 5. International standards for business, Government and Society. http://www.iso.org
ITSMF, IT Service Management Forum (2010) ITIL v3. Information technology infrastructure library. http://www.itsmfi.org
Janssens JG, Pintelon L, Cotton A, Gelders L (1996) Development of a framework for the assessment of operation and maintenance (O&M) performance of urban water supply and sanitation. Water Supply 14(1):21–33
Kelly A (2006) Maintenance and the industrial organization. Strategic maintenance planning, 1st Ed., Butterworth–Heinemann, 3
Kelly A, Harris MJ (1983) Management of industrial maintenance. Butterworth–Heinemann
Kleiner Y, Adams BJ, Rogers JS (2001) Water distribution network renewal planning. J Comput Civ Eng 15(1):15–26
Lobashov M, Sauter T (2006) Vertical communication from the enterprise level to the factory floor—integrating fieldbus and IP-based networks. Emerging technologies and factory automation, ETFA ‘06. IEEE Conference, pp 1214–1221
López Campos M, Crespo Márquez A (2009) Review, classification and comparative analysis of maintenance management models. J Autom Mobile Robotics Intell Syst 3(3):110–115
MacGillivray BH, Sharp JV, Strutt JE, Hamilton PD, Pollard SJ (2007) Benchmarking risk management within the international water utility sector Part I: design of a capability maturity methodology. J Risk Res 10(1):85–104
Madan S, Bollinger KE (1997) Applications of artificial intelligence in power systems. Electr Power Syst Res 41(2):117–131
MIMOSA (2008) Machinery information management open systems alliance. www.mimosa.org
Moglia M, Burn S, Meddings S (2006) Decision support system for water pipeline renewal prioritisation. Electr J Inf Technol Constr 11:237–256
Monteiro C, Ramírez-Rosado IJ, Miranda V, Zorzano-Santamaría PJ, García-Garrido E, Fernández-Jiménez LA (2005) GIS spatial analysis applied to electric line routing optimization. IEEE Trans Power Del 20(2I):934–42
Murthy DNP, Atrens A, Eccleston JA (2002) Strategic maintenance management. J Qual Mainte Eng 8(4):287–305
Mutafelija B, Stromberg H (2003) Systematic process improvement using ISO 9001:2000 and CMMI®. Artech House, Boston London
Nakajima S (1992) Introduccion al TPM (mantenimiento productivo total). Productivity Press, New York
NECS (2004) Networked control systems tolerant to faults. www.strep-necst.org
Nordman MM, Lehtonen M (2005) An agent concept for managing electrical distribution networks. IEEE Trans Power Del 20(2I):696–703
OPC (2006) OLE for process control. www.opcfoundation.org
OpenO&M (2004) Set of open standards for the exchange of operations & maintenance (O&M) data. www.openoandm.com
Peters T, Waterman HR Jr (1982) In search of excellence. Warner Books, New York
Pintelon L, Gelders LF (1992) Maintenance management decision making. Eur J Oper Res 58(3):301–317
Pintelon L, Van Wassenhove L (1990) A maintenance management tool. Omega 18(1):59–70
Porter M (1985) Competitive Advantage. Free Press, New York
Pramod VR, Devadasan SR, Muthu S, Jagathyraj VP, Dhakshina Moorthy G (2006) Integrating TPM and QFD for improving quality in maintenance engineering. JQME 12(2):150
Prasad MR, Anand D, Kodali R (2006) Development of a framework for world-class maintenance systems. JAMS 5(2):141
Raman LG (1999) Fundamentals of telecommunications network management. IEEE Press, Piscataway
Riis J, Luxhoj J, Thorsteinsson U (1997) A situational maintenance model. IJQRM 14(4):349–366
Sauter T (2005) Integration aspects in automation-A technology survey. In Proceedings 10th IEEE International conference emerging technologies and factory automation (ETFA), Catania, 19–22 Sept. vol 2, pp 255–263
Scarf PA, Martin HH (2001) Framework for maintenance and replacement of a network structured system. Int J Prod Econ 69(3):287–296
Schneider J, Gaul AJ, Neumann C, Hogräfer J, Wellßow W, Schwan M, Schnettler A (2006) Asset management techniques. Int J Electr Power Energy Syst 28(9):643–54
Sinha SK, Pandey MD (2002) Probabilistic neural network for reliability assessment of oil and gas pipelines. CACAIE 17(5):320–329
SNMP (2008) SNMP-Simple network management protocol. Internet engineering task force. www.ietf.org
Söderholm P, Holmgren M, Klefsjö B (2007) A process view of maintenance and its stakeholders. J Qual Maint Eng 13(1):19
Sterritt R (2004) Autonomic networks: engineering the self-healing property. Eng Appl Artif Intell 17(7):727–739
Tam A, Price J, Beveridge A (2007) A maintenance optimization framework in application to optimise power station boiler pressure parts maintenance. JQME 13(4):364
Terzi S, Cassina J, Panetto H (2006) Development of a meta model to foster interoperability along the product lifecycle traceability. In: Proceedings interoperability for enterprise software and applications Conference (I-ESA ‘06), pp 1–11
TNM, International telecommunication union—Telecommunication standardization sector (2000) recommendation M.3400: TMN and network maintenance: International transmission systems, telephone circuits, telegraphy, facsimile and leased circuits. Telecommunications management network. TMN management functions. Telecommunication standardization sector of ITU
Tomsovic K, Baer B (1996) Methods of approximate reasoning for power system equipment condition and reliability analysis. In: Proceedings of the international conference on intelligent systems applications to power systems, ISAP, pp 310–315
Tsang A (2002) Strategic dimensions of maintenance management. JQME. 8(1):7
Vanneste SG, Van Wassenhove LN (1995) An integrated and structured approach to improve maintenance. Eur J Oper Res 82(2):241–257
Varga P, Moldován I (2007) Integration of service-level monitoring with fault management for end-to-end multi-provider ethernet services. IEEE Trans Netw Serv Manag 4(1):28–38
Verho P, Järventausta P, Kärenlampi M, Partanen J (1996) An intelligent support system for distribution management. Int. J Eng Electr Eng Commun 4(4):219–227
Waeyenbergh G, Pintelon L (2002) A framework for maintenance concept development. IJPE 77:299
Watanabe H (1993) Reliability design method for maintenance strategy of telecommunication network. In: Proceedings of the annual reliability and maintainability symposium, pp 476–483
Wireman T (1998) Developing performance indicators for managing maintenance. Industrial Press, New York
Wireman T (1991) Total productive maintenance. Industrial Press, New York
Zhang Z, Li Z, Huo Z (2006) CMMS and its application in power system. Int J Power Energy Syst 26(1):75–82
Zhou Y, Pahwa A, Yang S (2006) Modeling weather-related failures of overhead distribution lines. IEEE Trans Power Syst 21(4):1683–1690
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2012 Springer-Verlag London
About this chapter
Cite this chapter
Fernández, J.F.G., Márquez, A.C. (2012). International Standards, Best Practices and Maintenance Management Models as Reference. In: Maintenance Management in Network Utilities. Springer Series in Reliability Engineering. Springer, London. https://doi.org/10.1007/978-1-4471-2757-4_2
Download citation
DOI: https://doi.org/10.1007/978-1-4471-2757-4_2
Published:
Publisher Name: Springer, London
Print ISBN: 978-1-4471-2756-7
Online ISBN: 978-1-4471-2757-4
eBook Packages: EngineeringEngineering (R0)