Abstract
Manufacturing processes involving material removal have been heavily studied over the past century. This book presents a foundation for the future of manufacturing research. As the industry is aimed to become proficient at the micro- and nanoscale levels of high-speed manufacturing, the dynamics of machining systems needs to be completely established throughout the entire process. Availability of the book is henceforth important to bridge engineering education to the need for high precision, high-yield micro- and nanomachining.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Andreaus, U. and Casini, P., 2002, Friction oscillator excited by moving base and colliding with a rigid or deformable obstacle, International Journal of Non-Linear Mechanics, 37, pp. 117–133.
Astakhov, V.P., Shvets, S.V. and Osman, M.O.M., 1997, Chip structure classification based on mechanics of its formation, Journal of Materials Processing Technology, 71, pp. 247–257.
Awrejcewicz, J. and Pyryev, Y., 2004, Tribological periodical processes exhibited by acceleration or braking of a shaft-pad system, Communications in Nonlinear Science and Numerical Simulation, 9, pp. 603–614.
Basuray, P.M., 1977, Transition from ploughing to cutting during machining with blunt tools, Wear, 43, pp. 341–349.
Berger, B.S., Rokni, M. and Minis, I., 1992, The nonlinear dynamics of metal cutting, International Journal of Engineering Science, 30, pp. 1433–1440.
Chandiramani, N.K. and Pothala, T., 2006, Dynamics of 2-DOF of regenerative chatter during turning, Journal of Sound and Vibration, 290, pp. 488–464.
Childs, T.H.C., 2007, Numerical experiments on the influence of material and other variables on plane strain continuous chip formation in metal machining, International Journal of Mechanical Sciences, 48, pp. 307–322.
Comparin, R.J. and Singh, R., 1989, Nonlinear frequency response characteristics of an impact pair, Journal of Sound and Vibration, 134, pp. 259–290.
Dankowicz, H. and Nordmark A.B., 2000, On the origin and bifurcations of stick-slip oscillations, Physica D, 136, pp. 280–302.
den Hartog, J.P., 1931, Forced vibrations with Coulomb and viscous damping, Transactions of the American Society of Mechanical Engineers, 53, pp. 107–115.
den Hartog, J.P. and Mikina, S.J., 1932, Forced vibrations with non-linear spring constants, ASME Journal of Applied Mechanics, 58, pp. 157–164.
di Bernardo, M., Budd, C.J. and Champneys, A.R., 2001a, Grazing and Border-collision in piecewise-smooth systems: a unified analytical framework, Physical Review Letters, 86, pp. 2553–2556.
di Bernardo, M., Budd. C.J. and Champneys, A.R., 2001b, Normal form maps for grazing bifurcation in n-dimensional piecewise-smooth dynamical systems, Physica D, 160, pp. 222–254.
di Bernardo, M., Budd. C.J. and Champneys, A.R., 2001c, Corner-collision implies border-collision bifurcation, Physica D, 154, pp. 171–194.
di Bernardo, M., Feigin, M.I., Hogan, S.J. and Homer, M.E., 1999, Local analysis of C-bifurcations in n-dimensional piecewise-smooth dynamical systems, Chaos, Solitons and Fractals, 10, pp. 1881–1908.
di Bernardo, M., Kowalczyk, P. and Nordmark, A.B., 2002, Bifurcation of dynamical systems with sliding: derivation of normal form mappings, Physica D, 170, pp. 175–205.
Fang, N. and Jawahir, I.S., 2002, Analytical predictions and experimental validation of cutting force ratio, chip thickness, and chip back-flow angle in restricted contact machining using the universal slip-line model, International Journal of Machine Tools & Manufacture, 42, pp. 681–694.
Feeny, B.F., 1992, A non-smooth Coulomb friction oscillator, Physics D, 59, pp. 25–38.
Feeny, B.F., 1994, The nonlinear dynamics of oscillators with stick-slip friction, in: A. Guran, F. Pfeiffer and K. Popp (eds), Dynamics with Friction, World Scientific: River Edge, pp. 36–92.
Feeny, B.F. and Moon, F.C., 1994, Chaos in a forced dry-friction oscillator: experiments and numerical modeling, Journal of Sound and Vibration, 170, pp. 303–323.
Feigin, M.I., 1970, Doubling of the oscillation period with C-bifurcation in piecewise-continuous systems, PMM, 34, pp. 861–869.
Feigin, M.I., 1995, The increasingly complex structure of the bifurcation tree of a piecewise-smooth system, Journal of Applied Mathematics and Mechanics, 59, pp. 853–863.
Filippov, A.F., 1964, Differential equations with discontinuous right-hand side, American Mathematical Society Translations, Series 2, 42, pp. 199–231.
Filippov, A.F., 1988, Differential Equations with Discontinuous Righthand Sides, Kluwer Academic Publishers: Dordrecht.
Gegg, B.C., Suh, C.S. and Luo, A.C.J., 2008, Chip Stick and Slip Periodic Motions of a Machine Tool in the Cutting Process, ASME Manufacturing Science and Engineering Conference Proceedings, MSEC ICMP2008/DYN-72052, October 7th–10th.
Grabec, I., 1986, Chaos generated by the cutting process, Physics Letters A, 117(8), pp. 384–386.
Grabec, I., 1988, Chaotic Dynamics of the cutting process, International Journal of Machine Tools and Manufacturing, 28, pp. 19–32.
Hetzler, H., Schwarzer, D. and Seemann, W., 2007, Analytical investigation of steady-state stability and Hopf-bifurcation occurring in sliding friction oscillators with application to low-frequency disc brake noise, Communications in Nonlinear Science and Numerical Simulation, 12, pp. 83–99.
Hinrichs, N., Oestreich, M. and Popp, K., 1997, Dynamics of oscillators with impact and friction, Chaos, Solitons and Fractals, 8, pp. 535–558.
Hinrichs, N., Oestreich, M. and Popp, K., 1998, On the modeling of friction oscillators, Journal of Sound and Vibration, 216, pp. 435–459.
Hundal, M.S., 1979, Response of a base excited system with Coulomb and viscous friction, Journal of Sound and Vibration, 64, pp. 371–378
Karagiannis, K. and Pfeiffer, F., 1991, Theoretical and experimental investigations of gear box, Nonlinear Dynamics, 2, pp. 367–387.
Kim, J.S. and Lee, B.H., 1991, An analytical model of dynamic cutting forces in chatter vibration, International Journal of Machine Tools Manufacturing, 31, pp. 371–381.
Kim, W.J. and Perkins, N.C., 2003, Harmonic balance/Galerkin method for non-smooth dynamical system, Journal of Sound and Vibration, 261, pp. 213–224.
Ko, P.L., Taponat, M.-C. and Pfaifer, R., 2001, Friction-induced vibration-with and without external disturbance, Tribology International, 34, pp. 7–24.
Leine, R.I., van Campen, D.H. and van de Vrande, 2000, Bifurcations in nonlinear discontinuous systems, Nonlinear Dynamics, 23, pp. 105–164.
Levitan, E.S., 1960, Forced oscillation of a spring-mass system having combined Coulomb and viscous damping, Journal of the Acoustical Society of America, 32, pp. 1265–1269.
Li, Y. and Feng, Z.C., 2004, Bifurcation and chaos in friction-induced vibration, Communications in Nonlinear Science and Numerical Simulation, 9, pp. 633–647.
Liu, K. and Melkote, S.N., 2006, Effect of plastic side flow on surface roughness in micro-turning process, International Journal of Machine Tools and Manufacture, 46, pp. 1778–1785.
Lu, C., 2007, Existence of slip and stick periodic motions in a non-smooth dynamical system, Chaos, Solitons and Fractals, 35, pp. 949–959.
Luo, A.C.J., 2005a, A theory for non-smooth dynamical systems on connectable domains, Communication in Nonlinear Science and Numerical Simulation, 10, pp. 1–55.
Luo, A.C.J., 2005b, Imaginary, sink and source flows in the vicinity of the separatrix of non-smooth dynamic system, Journal of Sound and Vibration, 285, pp. 443–456.
Luo, A.C.J., 2006, Singularity and Dynamics on Discontinuous Vector Fields, Elsevier: Amsterdam.
Luo, A.C.J., 2007a, Differential Geometry of Flows in Nonlinear Dynamical Systems, Proceedings of IDECT’07, ASME International Design Engineering Technical Conferences, September 4–7, 2007, Las Vegas, Nevada, USA. DETC2007–84754.
Luo, A.C.J., 2007b, On flow switching bifurcations in discontinuous dynamical system, Communications in Nonlinear Science and Numerical Simulation, 12, pp. 100–116.
Luo, A.C.J., 2008a, A theory for flow switchability in discontinuous dynamical systems, Nonlinear Analysis: Hybrid Systems, 2(4), 1030–1061.
Luo, A.C.J., 2008b, Global Transversality, Resonance and Chaotic Dynamics, World Scientific: Singapore.
Luo, A.C.J., 2009, Discontinuous Dynamical Systems on Time-varying Domains, Heidelberg: HEP-Springer.
Luo, A.C.J., 2011, Discontinuous Dynamical Systems, HEP- Springer: Heidelberg.
Luo, A.C.J. and Chen, L.D., 2005, Periodic motion and grazing in a harmonically forced, piecewise linear, oscillator with impacts, Chaos, Solitons and Fractals, 24, pp. 567–578.
Luo, A.C.J. and Chen, L.D., 2006, The grazing mechanism of the strange attractor fragmentation of a harmonically forced, piecewise, linear oscillator with impacts, IMechE Part K: Journal of Multi-body Dynamics, 220, pp. 35–51.
Luo, A.C.J. and Chen, L.D., 2007, Arbitrary periodic motions and grazing switching of a forced piecewise-linear, impacting oscillator, ASME Journal of Vibration and Acoustics, 129, pp. 276–284.
Luo, A.C.J. and Gegg, B.C., 2006a, On the mechanism of stick and non-stick periodic motion in a forced oscillator including dry-friction, ASME Journal of Vibration and Acoustics, 128, pp. 97–105.
Luo, A.C.J. and Gegg, B.C., 2006b, Stick and non-stick periodic motions in a periodically forced, linear oscillator with dry friction, Journal of Sound and Vibration, 291, pp. 132–168.
Luo, A.C.J. and Gegg, B.C., 2007a, Grazing phenomena in a periodically forced, linear oscillator with dry friction, Communications in Nonlinear Science and Numerical Simulation, 11(7), pp. 777–802.
Luo, A.C.J. and Gegg, B.C., 2007b, Periodic motions in a periodically forced oscillator moving on an oscillating belt with dry friction, ASME Journal of Computational and Nonlinear Dynamics, 1, pp. 212–220.
Luo, A.C.J. and Gegg, B.C., 2007c, Dynamics of a periodically excited oscillator with dry friction on a sinusoidally time-varying, traveling surface, International Journal of Bifurcation and Chaos, 16, pp. 3539–3566.
Luo, A.C.J. and O’Connor, D., 2007a, Nonlinear dynamics of a gear transmission system, Part I: mechanism of impacting chatter with stick, Proceedings of IDETC’07, 2007 ASME International Design Engineering Conferences and Exposition, September 4–7, 2007, Las Vegas, Nevada. IDETC2007–34881.
Luo, A.C.J. and O’Connor, D., 2007b, Nonlinear dynamics of a gear transmission system, Part II: periodic impacting chatter and stick, Proceedings of IMECE’07, 2007 ASME International Mechanical Engineering Congress and Exposition, November 10–16, 2007, Seattle, Washington. IMECE2007–43192.
Luo, A.C.J. and Thapa, S., 2007, On nonlinear dynamics of simplified brake dynamical systems, Proceedings of IMECE2007, 2007 ASME International Mechanical Engineering Congress and Exposition, November 5–10, 2007, Seattle, Washington, USA. IMECE2007–42349.
Merchant, M.E., 1945a, Mechanics of the metal cutting process. I. Orthogonal cutting and a type 2 chip, Journal of Applied Physics, 16, pp. 267–275.
Merchant, M.E., 1945b, Mechanics of metal cutting process. II Plasticity conditions in orthogonal cutting, Journal of Applied Physics, 16(5), pp. 318–324.
Moon, F.C. and Kalmar-Nagy, T., 2001, Nonlinear models for complex dynamics in cutting Materials, Philosophical Transactions of the Royal Society of London A, 359, pp. 695–711.
Natsiavas, S. (1998), Stability of piecewise linear oscillators with viscous and dry friction damping, Journal of Sound and Vibration, 217, pp. 507–522.
Natsiavas, S. and Verros, G., 1999, Dynamics of oscillators with strongly nonlinear asymmetric damping, Nonlinear Dynamics, 20, pp. 221–246.
Nordmark, A.B., 1991, Non-periodic motion caused by grazing incidence in an impact oscillator, Journal of Sound and Vibration, 145, pp. 279–297.
Nusse, H.E. and Yorke J.A., 1992, Border-collision bifurcations including ‘period two to period three’ for piecewise smooth systems, Physica D, 1992, 57, pp. 39–57.
Oxley, P.L., 1961, Mechanics of metal cutting, International Journal of Machine Tool Design Research, 1, pp. 89–97.
Ozguven, H.N. and Houser, D.R., 1988, Mathematical models used in gear dynamics-a Review, Journal of Sound and Vibration, 121(3), pp. 383–411.
Pfeiffer, F., 1984, Mechanische systems mit unstetigen ubergangen, Ingeniuer-Archiv, 54, pp. 232–240.
Pilipchuk, V.N. and Tan, C.A., 2004, Creep-slip capture as a possible source of squeal during decelerating sliding, Nonlinear Dynamics 35, pp. 258–285.
Rubenstien, C. and Storie, R.M., 1969, The cutting of polymers, International Journal of Machine Tool Design and Research, 9, pp. 117–130.
Shaw, S.W., 1986, On the dynamic response of a system with dry-friction, Journal of Sound and Vibration, 108, pp. 305–325.
Shouchry, A., 1979, Metal cutting and plasticity theory, Wear, 55, pp. 313–329.
Simoneau, A., Ng, E. and Elbestawi, M.A., 2006, Chip formation during microscale cutting of a medium carbon steel, International Journal of Machine Tools and Manufacture, 46, pp. 467–481.
Son, S., Lim, H. and Ahn, J., 2005, Effects of the friction coefficient on the minimum cutting thickness in micro cutting, International Journal of Machine Tools and Manufacture, 45, pp. 529–535.
Son, S., Lim, H. and Ahn, J., 2006, The effect of vibration cutting on minimum cutting thickness, International Journal of Machine Tools and Manufacture, 46, pp. 2066–2072.
Tarng, Y.S., Young, H.T. and Lee, B.Y., 1994, An analytical model of chatter vibration in metal cutting, International Journal of Machine Tools Manufacturing, 34, pp. 183–197.
Theodossiades, S. and Natsiavas, S., 2000, Non-linear dynamics of gear-pair systems with periodic stiffness and backlash, Journal of Sound and Vibration, 229(2), pp. 287–310.
Thomsen, J.J. and Fidlin, A., 2003, Analytical approximations for stick-slip vibration amplitudes, International Journal of Non-Linear Mechanics, 38, pp. 389–403.
Vela-Martinez, L., Jauregui-Correa, J.C., Rubio-Cerda, E., Herrera-Ruiz, G. and Lozano-Guzman, A., 2008, Analysis of compliance between the cutting tool and the workpiece on the stability of a turning process, International Journal of Machine Tools and Manufacture, 48, pp. 1054–1062.
Wahi, P. and Chatterjee, A., 2008, Self-interrupted regenerative metal cutting in turning, International Journal of Non-linear Mechanics, 43, pp. 111–123.
Warminski, J., Litak, G., Cartmell, M.P., Khanin, R. and Wiercigroch, M., 2003, Approximate analytical solution for primary chatter in the non-linear metal cutting model, Journal of Sound and Vibration, 259(4), pp. 917–933.
Wiercigroch, M., 1994, A note on the switch function for the stick-slip phenomenon, Journal of Sound and Vibration, 175(5), pp. 700–704.
Wiercigroch, M. and Cheng, A.H-D., 1997, Chaotic and stochastic dynamics of orthogonal metal cutting, Chaos, Solitons and Fractals, 8, pp. 715–726.
Wiercigroch, M., 1997, Chaotic vibration of a simple model of the machine tool-cutting process system, Transactions of the ASME: Journal of Vibration and Acoustics, 119, pp. 468–475.
Wiercigroch, M. and de Kraker, B., 2000, Applied nonlinear dynamics and chaos of mechanical systems with discontinuities, World Scientific Series A, 28.
Wiercigroch, M. and Budak, E., 2001, Sources of nonlinearities, chatter generation and suppression in metal cutting, Philosophical Transactions of the Royal Society of London A, 359, pp. 663–693.
Woon, K.S., Rahman, M., Neo, K.S. and Liu, K., 2008, The effect of tool edge radius on the contact phenomenon of tool-based micromachining, International Journal of Machine Tools and Manufacture, 48(12–13), pp. 1395–1407.
Wright, P.K., Horne, J.G. and Tabor, D., 1979, Boundary conditions at the chip-tool interface in machining: comparison between seizure and sliding friction, Wear, 54, pp. 371–390.
Wu, D.W. and Liu, C.R., 1984a, An analytical model of cutting dynamics. Part 1: Model building, The American Society of Mechanical Engineers, 84-WA/Prod-20, pp. 107–111.
Wu, D.W. and Liu, C.R., 1984b, An analytical model of cutting dynamics. Part 2: Verification, The American Society of Mechanical Engineers, 84-WA/Prod-21, pp. 112–118.
Zhusubaliyev, Z. and Mosekilde, E., 2003, Bifurcations and Chaos in Piecewise-smooth Dynamical Systems, World Scientific: Singapore.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2011 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Gegg, B.C., Suh, C.S., Luo, A.C.J. (2011). Introduction. In: Machine Tool Vibrations and Cutting Dynamics. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-9801-9_1
Download citation
DOI: https://doi.org/10.1007/978-1-4419-9801-9_1
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4419-9800-2
Online ISBN: 978-1-4419-9801-9
eBook Packages: EngineeringEngineering (R0)