Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
D. Steinberg, Vibration Analysis for Electronic Equipment, 2nd edn, John Wiley, 1988.
E. Suhir, Dynamic response of microelectronics and photonics systems to shocks and vibrations, International Conference on Electronic Packaging, INTERPack’97, Hawaii, June 15–19, 1997.
JEDEC Standard JESD22-B104-B, Mechanical Shock, 2001.
JEDEC Standard JESD22-B111, Board Level Drop Test Method of Components for Handheld Electronic Products, 2003.
S. Goyal, E.K. Buratynski, and G.W. Elko, Shock-protection suspension design for printed circuit board, Proceedings of SPIE, 4217, 2002.
S.K.W. Seah, C.T. Lim, E.H. Wong, V.B.C. Tan, and V.P.W. Shim, Mechanical response of PCBs in portable electronic products during drop impact, Proceedings 4th Electronics Packaging Technology Conference (EPTC 2002), Singapore, 10–12 Dec. 2002.
E. Suhir, Is the maximum acceleration an adequate criterion of the dynamic strength of a structural element in an electronic product?, IEEE CPMT Transactions, Part A, 20(4) (1997).
E. Suhir, Linear and nonlinear vibrations caused by periodic impulses, AIAA/ASME/ASCE/AHS 26th Structures, Structural Dynamics and Materials Conference, Orlando, FL, April 1985.
E. Suhir, Response of a flexible printed circuit board to periodic shock loads applied to its support contour, ASME Journal of Applied Mechanics, 59(2) (1992).
E. Suhir, Nonlinear dynamic response of a flexible thin plate to a constant acceleration applied to its support contour, with application to printed circuit boards used in avionic packaging, Int. Journal of Solids and Structures, 29(1) (1992).
C.T. Lim and Y.J. Low, Investigating the drop impact of portable electronic products, 52nd ECTC, 2002, Proceedings, 28–31 May 2002.
C.T. Lim, C.W. Ang, L.B. Tan, S.K.W. Seah, and E.H. Wong, Drop impact survey of portable electronic products. 53rd ECTC, IEEE, May 2003.
L. Zhu and W. Marcinkiewicz, Drop impact reliability analysis of CSP packages at board and product system levels through modeling approaches, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, IEEE, Part Vol. 2, 2004.
J.E. Luan and T.Y. Tee, Analytical and numerical analysis of impact pulse parameters on consistency of drop impact results. The 6th Electronics Packaging Technology Conference, IEEE Cat. No. 04EX971, 8–9 December 2004.
E. Suhir, Dynamic response of a one-degree-of-freedom linear system to a shock load during drop tests: effect of viscous damping, IEEE CPMT Transactions, Part A, 19(3) (1996).
E. Suhir, Could shock tests adequately mimic drop test conditions? 52nd ECTC Proc., 2002.
E. Suhir and R. Burke, Dynamic response of a rectangular plate to a shock load, with application to portable electronic products, IEEE Trans. Components, Packaging, and Manufacturing Technology, Part B: Advanced Packaging, 17(3) (1994).
S. Goyal, J.M. Papadopoulos, and P.A. Sullivan, Shock protection of portable electronic products: shock response spectrum, damage boundary approach, and beyond, Shock and Vibration, 4(3) (1997).
K.C. Ong, et al., Dynamic materials testing and modeling of solder interconnects, 54th ECTC, 2004.
L. Zhu, Submodeling technique for BGA reliability analysis of CSP packaging subjected to an impact loading, InterPACK Conference Proc., 2001.
T. Sogo and S. Hara, Estimation of fall impact strength for BGA solder joints, ICEP Conference Proc., Japan, 2001.
Q. Yu, H. Kukuichi, S. Ikeda, M. Shiratori, M. Kakino, and N. Fujiwara, Dynamic behavior of electronics package and impact reliability of BGA solder joints, Intersociety Conf. on Thermal Phenomena, 2002.
L.B. Tan, Board level solder joint failure by static and dynamic loads, Proc. 5th EPTC, 2003.
M. Arra, et al., Performance of lead free solder joints under dynamic mechanical loading, Proc. 52nd ECTC, 2002.
M. Date, et al., Ductile-to-brittle transition in Sn-Zn solder joints measured by impact tests, Scripta Materialia, 51 (2004).
J. Wu, Global and local coupling analysis for small components in drop simulation, 6th International LS-DYNA Users Conference Proc., 2000.
K. Mishiro, et al., Effect of the drop impact on BGA/CSP package reliability, Microelectronics Reliability, 42 (2002).
E.H. Wong, C.T. Lim, N. Lee, S.K.W. Seah, C. Hoe, and J. Wang, Drop impact test—mechanics and physics of failure, 4th EPTC Proc., Singapore, 2002.
D. Xie, et al., Solder joint behavior of area array packages in board-level drop for hand held devices, 53rd ECTC, 2003.
C.-L. Yeh and Y.-S. Lai, Effect of solder joint shapes on free drop reliability of chip-scale packages, Proc. IMAPS Taiwan Tech. Symp., 2004.
J.E. Luan and T.Y. Tee, Effect of impact pulse on dynamic responses and solder joint reliability of TFBGA packages during board level drop test, 6th EMAP Conference, Malaysia, Dec. 2004.
T.C. Chiu, et al., Effect of thermal aging on board level drop reliability for Pb-free BGA package, 54th ECTC 2004.
A. Syed, et al., A methodology for drop performance prediction and application for design optimization of chip scale packages, 55th ECTC, 2005.
J. Wu, G. Song, C.-P. Yeh, and K. Wyatt, Drop/impact simulation and test validation of telecommunication products, Thermomechanical Phenomena in Electronic Systems, Proceedings of the Intersociety Conference, 1998, Conference: Proceedings of the 1998 6th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM, May 27–30 1998, pp. 330–336.
L. Zhu, Submodeling technique for BGA reliability analysis of CSP packaging subjected to an impact loading, InterPACK Conference Proc., 2001.
C.T. Lim, Y.M. Teo, and V.P.W. Shim, Numerical simulation of the drop impact response of a portable electronic product, IEEE CPMT Transactions, 25(3) (2002).
T.Y. Tee, H.S. Ng, C.T. Lim, E. Pek, and Z.W. Zhong, Application of drop test simulation in electronic packaging, 4th ASEAN ANSYS Conf., 2002.
L. Xu, et al., Numerical studies of the mechanical response of solder joints to drop/impact load, Proc. EPTC 2003.
T.Y. Tee, H.S. Ng, C.T. Lim, E. Pek, and Z.W. Zhong, Board level drop tests and simulation of TFBGA packages for telecommunication applications, 53rd ECTC Proc., May 2003.
L. Zhu, Modeling technique for reliability assessment of portable electronic product subjected to drop impact loads, 53rd ECTC, pp. 100–104, 2003.
Y.Q. Wang, Modeling and simulation of PCB drop test, Proc. 5th EPTC, 2003, pp. 263–268.
J.E. Luan, T.Y. Tee, E. Pek, C.T. Lim, and Z.W. Zhong, Modal analysis and dynamic responses of board level drop test, 5th EPTC Conference4 Proc., Singapore, 2003.
L. Zhu, and W. Marcinkiewicz, Drop impact reliability analysis of CSP packages at board and product system levels through modeling approaches, Intersociety Conference on Thermal and Thermo-Mechanical Phenomena, 2004, pp. 296–303.
S. Irving, and Y. Liu, Free drop test simulation for portable IC package by implicit transient dynamics FEM, Proceedings Electronic Components and Technology Conference, Vol. 1, Proceedings 54th Electronic Components and Technology Conference, 2004.
T.Y. Tee, J.E. Luan, E. Pek, C.T. Lim, and Z.W. Zhong, Novel numerical and experimental analysis of dynamic responses under board level drop test, EuroSime Conference Proc., 2004.
T.Y. Tee, J.E. Luan, E. Pek, C.T. Lim, and Z.W. Zhong, Advanced experimental and simulation techniques for analysis of dynamic responses during drop impact, 54th ECTC Proc., 2004, pp. 1088–1094.
C.L. Yeh and Y.S. Lai, Transient simulation of solder joint fracturing under impact test, 6th EPTC, Singapore, 8–10 Dec. 2004.
P. Marjamaki, T. Mattila, and J. Kivilahti, FEA of lead-free drop test boards, 55th ECTC Proc., 2005.
E. Suhir, Predicted fundamental vibration frequency of a heavy electronic component mounted on a printed circuit board, ASME Journal of Electronic Packaging, 122(1) (2000).
E. Suhir, Free vibrations of a fused biconical taper lightwave coupler, Int. Journal of Solids and Structures, 29(24) (1992).
E. Suhir, Vibration frequency of a fused biconical taper (FBT) lightwave coupler, IEEE/OSA Journal of Lightwave Technology, 10(7) (1992).
E. Suhir, Elastic stability, free vibrations, and bending of optical glass fibers: the effect of the nonlinear stress-strain relationship, Applied Optics, 31(24) (1992).
E. Suhir, Applied Probability for Engineers and Scientists, McGraw-Hill, 1997.
W. Huang, D.B. Kececioglu, and J.L. Prince, A simplified random vibration analysis on portable electronic products, IEEE Transactions on Components & Packaging Technologies, 23(3) (2000).
E. Suhir, Analytical modeling in structural analysis for electronic packaging: its merits, shortcomings and interaction with experimental and numerical techniques, ASME Journal of Electronic Packaging, 111(2) (1989).
E. Suhir, Shock protection with a nonlinear spring, IEEE CPMT Transactions, Advanced Packaging, Part B, 18(2) (1995).
E. Suhir, Shock-excited vibrations of a conservative duffing oscillator with application to shock protection in portable electronics, Int. Journal of Solids and Structures, 33(24) (1996).
S.P. Timoshenko and J.M. Gere, Theory of Elastic Stability, 2nd edn, McGraw-Hill, 1988.
E. Suhir, Structural Analysis in Microelectronics and Fiber Optics, Van-Nostrand, 1997.
P. Appell and E. Lacour, Principes de la Theorie des Functions Elliptiques et Applications, 2nd edn, Paris, 1922 (in French).
F. Oberhettinger and W. Magnus, Anwendung der elliptischen Funktionen in Physiknund Technik, Springer Verlag, 1949 (in German).
J. Spanier and K.B. Oldham, An Atlas of Functions, Hemisphere Publ. Corp., 1987.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Suhir, E. (2007). Dynamic Response of Micro- and Opto-Electronic Systems to Shocks and Vibrations: Review and Extension. In: Suhir, E., Lee, Y.C., Wong, C.P. (eds) Micro- and Opto-Electronic Materials and Structures: Physics, Mechanics, Design, Reliability, Packaging. Springer, Boston, MA. https://doi.org/10.1007/0-387-32989-7_16
Download citation
DOI: https://doi.org/10.1007/0-387-32989-7_16
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-27974-9
Online ISBN: 978-0-387-32989-5
eBook Packages: EngineeringEngineering (R0)