Abstract
We have already analyzed the operation of a number of different types of converters: buck, boost, buck-boost, Ćuk, voltage-source inverter, etc. With these converters, a number of different functions can be performed: step-down of voltage, step-up, inversion of polarity, and conversion of dc to ac or viceversa.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
S. Ćuk, “Modeling, Analysis, and Design of Switching Converters,” Ph.D. thesis, California Institute of Technology, November 1976.
S. Ćuk and R. D. Middlebrook, “A New Optimum Topology Switching Dc-to-Dc Converter,” IEEE Power Electronics Specialists Conference, 1977 Record, pp. 160–179, June 1977.
E. Landsman, “A Unifying Derivation of Switching Dc-Dc Converter Topologies,” IEEE Power Electronics Specialists Conference, 1979 Record, pp. 239–243, June 1979.
R. Tymerski and V. Vorperian, “Generation, Classification, and Analysis of Switched-Mode Dc-to-Dc Converters by the Use of Converter Cells,” Proceedings International Telecommunications Energy Conference, pp. 181–195, October 1986.
S. Ćuk and R. Erickson, “A Conceptually New High-Frequency Switched-Mode Amplifier Technique Eliminates Current Ripple,” Proceedings Fifth National Solid-State Power Conversion Conference (Powercon 5), pp. G3.1-G3.22, May 1978.
F. Barzegar and S. Ćuk, “A New Switched-Mode Amplifier Produces Clean Three-Phase Power,” Proceedings Ninth International Solid-State Power Conversion Conference (Powercon 9), pp. E3.1-E3.15, July 1982.
K. D. T. Ngo, S. Ćuk, and R. D. Middlebrook, “A New Flyback Dc-to-Three-Phase Converter with Sinusoidal Outputs,” IEEE Power Electronics Specialists Conference, 1983 Record, pp. 377–388.
R. W. Erickson, “Synthesis of Switched-Mode Converters,” IEEE Power Electronics Specialists Conference, 1983 Record, pp. 9–22, June 1983.
D. Maksimovic and S. Ćuk, “General Properties and Synthesis of PWM Dc-Dc Converters,” IEEE Power Electronics Specialists Conference, 1989 Record, pp. 515–525, June 1989.
M. S. Makowski, “On Topological Assumptions on PWM Converters—A Reexamination,” IEEE Power Electronics Specialists Conference, 1993 Record, pp. 141–147, June 1993.
B. Israelsen, J. Martin, C. Reeve, and V. Scown, “A 2.5 kV High Reliability TWT Power Supply: Design Techniques for High Efficiency and Low Ripple,” IEEE Power Electronics Specialists Conference, 1977 Record, pp. 109–130, June 1977.
R. Severns, “A New Current-Fed Converter Topology,” IEEE Power Electronics Specialists Conference, 1979 Record, pp. 277–283, June 1979.
V. J. Thottuvelil, T. G. Wilson, and H. A. Owen, “Analysis and Design of a Push-Pull Current-Fed Converter,” IEEE Power Electronics Specialists Conference, 1981 Record, pp. 192–203, June 1981.
R. Redl and N. Sokal, “Push-Pull Current-Fed Multiple-Output Dc-Dc Power Converter with Only One Inductor and with 0–100% Switch Duty Ratio,” IEEE Power Electronics Specialists Conference, 1980 Record, pp. 341–345, June 1982.
P. W. Clarke, “Converter Regulation by Controlled Conduction Overlap,” U. S. Patent 3,938,024, February 10, 1976.
R. P. Massey and E. C. Snyder, “High-Voltage Single-Ended Dc-Dc Converter,” IEEE Power Electronics Specialists Conference, 1977 Record, pp. 156–159, June 1977.
D. Maksimovic and S. Ćuk, “Switching Converters with Wide Dc Conversion Range,” IEEE Transactions on Power Electronics, Vol. 6, No. 1, pp. 151–157, January 1991.
R. D. Middlebrook and S. Ćuk, “Isolation and Multiple Outputs of a New Optimum Topology Switching Dc-to-Dc Converter,” IEEE Power Electronics Specialists Conference, 1978 Record, pp. 256–264, June 13–15, 1978.
T. G. Wilson, “Cross Regulation in an Energy-Storage Dc-to-Dc Converter with Two Regulated Out-puts,” IEEE Power Electronics Specialists Conference, 1977 Record, pp. 190–199, June 1977.
H. Matsuo, “Comparison of Multiple-Output Dc-Dc Converters Using Cross Regulation,” IEEE Power Electronics Specialists Conference, 1979 Record, pp. 169–185, June 1979.
K. Harada, T. Nabeshima, and K. Hisanaga, “State-Space Analysis of the Cross-Regulation,” IEEE Power Electronics Specialists Conference, 1979 Record, pp. 186–192, June 1979.
J. N. Park and T. R. Zaloum, “A Dual Mode Forward/Flyback Converter,” IEEE Power Electronics Specialists Conference, 1982 Record, pp. 3–13, June 1982.
S. Ćuk, “General Topological Properties of Switching Structures,” IEEE Power Electronics Specialists Conference, 1979 Record, pp. 109–130, June 1979.
R. Severns and G. Bloom, Modern Dc-to-Dc Switchmode Power Converter Circuits, New York: Van Nostrand Reinhold, 1985.
N. Mohan, T. Undeland, and W. Robbins, Power Electronics: Converters, Applications, and Design, 2nd edit., New York: John Wiley & Sons, 1995.
J. Kassakian, M. Schlecht, and G. Verghese, Principles of Power Electronics, Reading, MA: Addison-Wesley, 1991.
D. Mitchell, Dc-Dc Switching Regulator Analysis, New York: McGraw-Hill, 1988.
K. Kit Sum, Switch Mode Power Conversion: Basic Theory and Design, New York: Marcel Dekker, 1984.
R. E. Tarter, Solid-State Power Conversion Handbook, New York: John Wiley & Sons, 1993.
Q. Chen, F. C. Lee, and M. M. Jovanovic, “DC Analysis and Design of Multiple-Output Forward Converters with Weighted Voltage-Mode Control,” IEEE Applied Power Electronics Conference, 1993 Record, pp. 449–455, March 1993.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2001 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Erickson, R.W., Maksimović, D. (2001). Converter Circuits. In: Fundamentals of Power Electronics. Springer, Boston, MA. https://doi.org/10.1007/0-306-48048-4_6
Download citation
DOI: https://doi.org/10.1007/0-306-48048-4_6
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4757-0559-1
Online ISBN: 978-0-306-48048-5
eBook Packages: Springer Book Archive