Abstract
It is nearly always required that a filter be added at the power input of a switching converter. By attenuating the switching harmonics that are present in the converter input current waveform, the input filter allows compliance with regulations that limit conducted electromagnetic interference (EMI). The input filter can also protect the converter and its load from transients that appear in the input voltage vg(t), thereby improving the system reliability.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
M. Nave, Power Line Filter Design for Switched Mode Power Supplies, New York: Van Nostrand Rein-hold, 1991.
Design Guide for Electromagnetic Interference (EMI) Reduction in Power Supplies, MIL-HDBK-241B, U.S. Department of Defense, April 1 1981.
C. Marsham, The Guide to the EMC Directive 89/336/EEC, New York: IEEE Press, 1992.
P. Degauque and J. Hamelin, Electromagnetic Compatibility, Oxford: Oxford University Press, 1993.
R. Redl, “Power Electronics and Electromagnetic Compatibility,” IEEE Power Electronics SpecialistsConference, 1996 Record, pp. 15–21.
P. R. Willcock, J. A. Ferreira, J. D. Van Wyk, “An Experimental Approach to Investigate the Generation and Propagation of Conducted EMI in Converters,” IEEE Power Electronics Specialists Conference, 1998 Record, pp. 1140–1146.
L. Rossetto, S. Buso and G. Spiazzi, “Conducted EMI Issues in a 600W Single-Phase Boost PFC Design,” IEEE Transactions on Industry Applications, Vol. 36, No. 2, pp. 578–585, March/April 2000.
F. Dos Reis, J. Sebastian and J. Uceda, “Determination of EMI Emissions in Power Factor Preregulators by Design,” IEEE Power Electronics Specialists Conference, 1994 Record, pp. 1117–1126.
R. D. Middlebrook, “Input Filter Considerations in Design and Application of Switching Regulators,” IEEE Industry Applications Society Annual Meeting, 1976 Record, pp. 366–382.
R. D. Middlebrook, “Design Techniques for Preventing Input Filter Oscillations in Switched-Mode Regulators,” Proceedings of Powercon 5, pp. A3–A3.16, May 1978.
T. Phelps and W. Tate, “Optimizing Passive Input Filter Design,” Proceedings of Powercon 6, pp. G 1.1–G1.10, May 1979.
Y. Jang and R. Erickson, “Physical Origins of Input Filter Oscillations in Current Programmed Converters,” IEEE Transactions on Power Electronics, Vol 7, No. 4, pp. 725–733, October 1992.
S. Erich and W. Polivka, “Input Filter Design for Current-Programmed Regulators,” IEEE Applied Power Electronics Conference, 1990 Proceedings, pp. 781–791, March 1990.
N. Sokal, “System Oscillations Caused by Negative Input Resistance at the Power Input Port of a Switching Mode Regulator, Amplifier, Dc/Dc Converter, or Dc/Ac Inverter,” IEEE Power Electronics Specialists Conference, 1973 Record, pp. 138–140.
A. Kislovski, R. Redl, and N. Sokal, Dynamic Analysis of Switching-Mode Dc/Dc Converters, New York: Van Nostrand Reinhold, Chapter 10, 1991.
S. Kelkar and F. Lee, “A Novel Input Filter Compensation Scheme for Switching Regulators,” IEEEPower Electronics Specialists Conference, 1982 Record, pp. 260–271.
R. Erickson, “Optimal Single-Resistor Damping of Input Filters,” IEEE Applied Power Electronics Conference, 1999 Proceedings, pp. 1073–1097, March 1999.
M. Florez-Lizarraga and A. F. Witulski, “Input Filter Design for Multiple-Module Dc Power Systems,” IEEE Transactions on Power Electronics, Vol 11, No. 3, pp. 472–479, May 1996.
V. Vlatkovic, D. Borojevic and F. Lee, “Input Filter Design for Power Factor Correction Circuits,” IEEE Transactions on Power Electronics, Vol 11, No.1, pp. 199–205, January 1996.
F. Yuan, D. Y. Chen, Y. Wu and Y. Chen, “A Procedure for Designing EMI Filters for Ac Line Applications,” IEEE Transactions on Power Electronics, Vol 11, No. 1, pp. 170–181, January 1996.
G. Spiazzi and J. Pomilio, “Interaction Between EMI Filter and Power Factor Preregulators with Average Current Control: Analysis and Design Considerations,” IEEE Transactions on Industrial Electronics, Vol. 46, No. 3, pp. 577–584, June 1999.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2001 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Erickson, R.W., Maksimović, D. (2001). Input Filter Design. In: Fundamentals of Power Electronics. Springer, Boston, MA. https://doi.org/10.1007/0-306-48048-4_10
Download citation
DOI: https://doi.org/10.1007/0-306-48048-4_10
Publisher Name: Springer, Boston, MA
Print ISBN: 978-1-4757-0559-1
Online ISBN: 978-0-306-48048-5
eBook Packages: Springer Book Archive