Abstract
The computer-aided design (CAD) system is specified for the preproduction engineering of the aircraft engine compressor blades. This system is characterized by a high quality of designing the finishing cutoff and reducing dies. It is shown that a high level of unification and integration in CAD permits the time of designing the punch tool sets to be significantly reduced.
Similar content being viewed by others
References
Khaimovich, I.N. and Khaimovich, A.I., Improving Industrial Ozganization at a Machine Building Enterprise on the Basis of Reengineering, Vestnik SGAU im. S.P. Korolev, 2006, no. 3, pp. 53–58.
Khaimovich, I.N. and Khaimovich, A.I., Procedure Rules of Press Forging Business Process Development and Coordination, Vestnik SGAU im. S.P. Korolev, 2008, no. 1, pp. 248–252.
Grechnikov F.V., Nenashev, V.Yu., and Khaimovich, I.N., Control of Compressor Blade Production Planning Based on Integrating the Computer-Aided Design and Engineering Analysis, Kuznechno-Shtampovochnoe Proizvodstvo, 2008, no. 6, pp. 42–46..
Dem’yanenko, E.G., Popov, I.P., and Tlyustenko, S.F., The Analysis of the Crimp Seal-Forming Process in the LS-DYNA System, Vestnik SGAU im. S.P. Korolev, 2006, no. 2, part 1, pp. 282–286.
Khaimovich, A.I. and Mikheev, V.A., Mathematical Modeling of Dynamic Recrystallization for Polycrystalline Materials at Intensive Plastic Deformation, Kuznechno-Shtampovochnoe Proizvodstvo, 2011, no. 7, pp. 37–44.
Shitarev, I.L. and Khaimovich, A.I., Microstructure Modeling at High-Speed Stamping of the VT 9 Titanium Alloy Blades, Zagotovitel’nye Proizvodstva v Mashinostroenii, 2011, no. 11, pp. 41–44.
Popov, I.P., Maslov, V.D., and Severinenko, A.Yu., Application of CAD/CAE-Systems in Studying the Shaping Processes for Thin-Walled T-Joints, SAPR i Grafika, 2012, no. 1, pp. 86–88.
Ovodenko, A.M., Aryshenskii, E.V., Grechnikova, A.F., and Beglov, E.D., Development of a Mathematical Model for Tensile Load Distribution over the Strip Width at 2800 Hot Rolling Mill, Izvestiya SNTs RAN, 2011, vol. 13, no. 6, pp. 145–151.
Klentak, L.S. and Khaimovich, I.N., An Improvement of Techniques for Smoothing the Surfaces Using Interpolation Splines, Fundamental’nye Issledovaniya, 2013, no. 10, part 12, pp. 2634–2638.
Dem’yanenko, E.G. and Popov, I.P., A Punch for the Thin-Walled Welded Shell Production, Zagotovitel’nye Proizvodstva v Mashinostroenii, 2006, no. 12, pp. 25–27.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.N. Khaimovch, 2014, published in Izvestiya VUZ. Aviatsionnaya Tekhnika, 2014, No. 2, pp. 44–48.
About this article
Cite this article
Khaimovich, I.N. Computer-aided design of blank forging production facilities for aircraft engine compressor blades. Russ. Aeronaut. 57, 169–174 (2014). https://doi.org/10.3103/S1068799814020093
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068799814020093