Abstract
The influence of pliability of the rough contact layer on the load distribution over the screws in a complex joint under the action of a separation force and a skew torque is investigated experimentally.
Similar content being viewed by others
References
Birger, I.A. and Iosilevich, G.B., Rez’bovye soedineniya (Screw Joints), Moscow: Mashinostroenie, 1973.
Schlosser, E., Der Einfluss ebener verschraubter Fugen auf das statische Verhalten von Werkzeugmaschinengestellen, Werkstattstechn. Maschinenbau, 1957, vol. 47, no. 1, pp. 35–47.
Recommendations R 50-54-90-88: Strength Calculations and Tests: General Requirements on Strength Calculations for Screw Joints, Moscow: VNIINMASh, 1988.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.V. Murkin, A.S. Ivanov, M.M. Ermolaev, N.N. Kuralina, 2014, published in Vestnik Mashinostroeniya, 2014, No. 4, pp. 7–10.
About this article
Cite this article
Murkin, S.V., Ivanov, A.S., Ermolaev, M.M. et al. Complex screw joint under the action of the separation force and a skew torque. Russ. Engin. Res. 34, 429–432 (2014). https://doi.org/10.3103/S1068798X14070090
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14070090