Abstract
The results of the investigation into the abrasiveness of iron-coated surfaces during friction on a solid abrasive surface with aluminum oxide particles on a ceramic binder are presented. It is shown that the particles of the abrasive surface are deteriorated considerably more during friction on a surface of a pure iron coating than on these doped with nickel or cobalt, while they detach from the ceramic binder under considerably smaller loads. It is established that the partial friction coefficient of the abrasive surface is considerably larger during friction on the usual iron depositions than on these doped with nickel or cobalt.
Similar content being viewed by others
References
Elinek, T.V., Advances in Electroplating. Review of World Literature for 1998–1999, Gal’vanotekh. Obrab. Poverkhn., 2000, vol. 8, no. 1, pp. 9–14.
Kolchemanov, N.A., Almaznyi instrument: sostoyanie i perspektivy razvitiya (Diamond Tool: State and Developmental Prospects), Moscow, 1990.
Baikalov, A.K. and Sukennik, I.L., Almaznyi pravyashchii instrument na gal’vanicheskoi svyazke (Diamond Dressing Tool Based on the Galvanic Binder), Kiev: Naukova dumka, 1976.
Sadakov, G.A. and Dyubankova, E.N., Application of Electroplating for Fabricating the Diamond Tool, Gal’vanotekh. Obrab. Poverkhn., 1994, vol. 3, no. 1, pp. 29–31.
Gur’yanov, G.V., Elektroosazhdenie iznosostoikikh kompozitsii (Electrodeposition of Wear-Resistant Composites), Chisinau: Shtiintsa, 1985.
Bortsoi, T.V., Relaxation Processes of the Remaining Tension Formation in Iron Electrochemical Deposits, Surf. Eng. Appl. Electrochem., 2009, vol. 45, no. 3, pp. 225–228.
Andreeva, L.N., Elektroosazhdenie splava zhelezokobal’t. Vosstanovlenie i uprochnenie detalei mashin iznosostoikimi pokrytiyami (Electrodepositoin of the Iron-Cobalt Alloy. Reduction and Hardening of Machine Elements with Wear-Resistant Coatings), Chisinau: Shtiintsa, 1995.
Gologan, V.F., Azhder, V.V., and Zhavguryanu, V.N., Povyshenie dolgovechnosti detalei mashin iznosostoikimi pokrytiyami (An Increase in Service Life of Machine Elements with Wear-Resistant Coatings), Chisinau, 1979.
Borţoi, T., Brevet de inventie 3087, G 01 N 3/56, BOPI, 2006, no. 6
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © T.V. Bortzoi, 2012, published in Elektronnaya Obrabotka Materialov, 2012, No. 5, pp. 58–62.
About this article
Cite this article
Bortzoi, T.V. Abrasiveness of an electrochemical iron binder on a solid abrasive surface with aluminum oxide particles. Surf. Engin. Appl.Electrochem. 48, 426–429 (2012). https://doi.org/10.3103/S1068375512050031
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068375512050031