Abstract
The axisymmetric problem on the stress-strain state of a long thick-walled circular cylinder made of shape memory alloy experiencing the direct thermoelastic martensite phase transition under the action of constant internal and external pressures and a constant axial force is solved. The problem of limit loads in such a process is also considered.
Similar content being viewed by others
References
A. A. Il’yushin and P. M. Ogibalov, Elastoplastic Deformations of Hollow Cylinders (Izdat. MGU, Moscow, 1960) [in Russian].
V. V. Sokolovskii, Theory of Plasticity (Vysshaya Shkola,Moscow, 1969) [in Russian].
L.M. Kachanov, Foundations of Plasticity (Nauka,Moscow, 1969) [in Russian].
V. A. Likhachev, S. L. Kuz’min, and Z. P. Kamentseva, ShapeMemory Effect (Izdat. LGU, Leningrad, 1987) [in Russian].
K. Oottsuka, K. Simidzu, Yu. Sudzuki, et al., Shape Memory Alloys (Metallurgiya, Moscow, 1990) [in Russian].
S. P. Belyaev, A. E. Volkov, V. A. Ermolaev, et al., Shape Memory Materials: Reference Book, Ed. by V. A. Likhachev (Izdat. NIIKh SPbGU, St.Petersburg, 1998) [in Russian].
V. A. Likhachev, Yu. D. Kravchenko, A. I. Razov, et al., “An Experience of Application of Shape Memory Alloys in Design of Large-Size Structures in Open Space,” Zh. Tekhn. Fiz. 66 (11), 153–161 (1996).
V. A. Likhachev and V. G. Malinin, Structure-Analytical Theory of Strength (Nauka, St. Petersburg, 1993) [in Russian].
V. A. Likhachev, A. I. Razov, and A. E. Volkov, “Finite Difference Simulation of a Thermomechanical Coupling,” in Proc. Second Intern. Conf. on Shape Memory and Superelastic Technologies SMST-97 (Asilomar Conference Center, Pacific Grove, California, USA, 1997), pp. 335–340.
Yu. B. Kakuliya and A. M. Shariygin, “Numerical Simulation of Stresses and Strains in a Thick-Walled Tube Made of a Shape Memory Material,” Zh. Funkts. Mater., No. 8, 303–313 (2007).
A. E. Volkov, “Microstructure Modeling of Alloy Deformation in RepeatedMartensite Transformations,” Izv. Ross. Akad. Nauk. Ser. Fiz. 66 (9), 1290–1297 (2002) [Bull. Russ. Acad. Sci. Phys. (Engl. Transl.)].
A. E. Volkov and V. Yu. Sakharov, “Thermomechanical Macromodel of Shape Memory Alloys,” Izv. Ross. Akad. Nauk, Ser. Fiz. 67 (6), 845–851 (2003) [Bull. Russ. Acad. Sci. Phys. (Engl. Transl.)].
A. E. Volkov and A. S. Kukhareva, “Calculation of the Stress-Strain State of a TiNi Cylinder Subjected to Cooling under Axial Force and Unloading,” Izv. Ross. Akad. Nauk, Ser. Fiz. 72 (9), 1337–1340 (2008) [Bull. Russ. Acad. Sci. Phys. (Engl. Transl.) 72 (9), 1267–1270 (2008)].
A.E. Volkov and A. S. Kukhareva, “Calculations of Stress Strain State in Infinite Cylinder of Shape Memory Alloy under Cooling and Heating at Different Rates,” Mekh. Komp. Mater. Konstr. 15 (1), 128–136 (2009) [J. Comp. Mech. Design (Engl. Transl.)].
A. A. Movchan, “Micromechanical Description of the Deformation due to Martensite Transformations in Shape-Memory Alloys,” Izv. Akad. Nauk. Mekh. Tverd. Tela, No. 1, 197–205 (1995) [Mech. Solids (Engl. Transl.) 30 (1), 186–192 (1995)].
A. A. Movchan, “Some Manifestations of Oriented Transform Ability of Shape-Memory Alloys,” Zh. Prikl. Mekh. Tekh. Fiz. 37 (6), 181–189 (1996) [J. Appl. Mech. Tech. Phys. (Engl. Transl.) 37 (6), 926–933 (1996)].
A. A. Movchan, “Analytical Solution of Problems on the Direct and Inverse Transformations in Shape Memory Alloys,” Izv. Akad. Nauk. Mekh. Tverd. Tela, No. 4, 136–144 (1996) [Mech. Solids (Engl. Transl.) 31 (4), 116–123 (1996)].
A, V, Kuznetsov, “Numerical Soltuion of Coupled Axisymmetric Problem of Direct Transition of Shape Memory Alloys,” Mekh. Komp. Mater. Konstr. 3–4, 71–77 (1996) [J. Comp.Mech. Design (Engl. Transl.)].
L. I. Shkutin, “Analysis of Axisymmetric Phase Strains in Plates and Shells,” Zh. Prikl. Mekh. Tekhn. Fiz. 48 (2), 163–171 (2007) [J. Appl.Mech. Tech. Phys. (Engl. Transl.) 48 (2), 285–291 (2007)].
L. I. Shkutin, “Axisymmetric Deformation of Plates and Shells with Phase Trasformations under Thermal Cycling,” Zh. Prikl. Mekh. Tekhn. Fiz. 49 (2), 204–210 (2008) [J. Appl. Mech. Tech. Phys. (Engl. Transl.) 49 (2), 330–335 (2008)].
L. I. Shkutin, Nonlinear Deformations and Catastrophes of Thin Bodies (Izdat. Siberian Branch RAS, Novosibirsk, 2014) [in Russian].
A. A. Movchan and A. E. Mashikhin, “Deformations of Circular Cylinder of Shape Memory Alloy in Structural Transition or Direct Phase Transformation,” Mekh.Komp.Mater. Konstr. 18 (2), 235–247 (2012).
A. A. Movchan, I.A. Movchan, L.G. Sil’chenko “Micromechanical Model of Nonlinear Deformation of Shape MemoryAlloys under Phase and Structure Transitions,” Izv. Akad. Nauk.Mekh. Tverd. Tela, No. 3, 118–130 (2010) [Mech. Solids (Engl. Transl.) 45 (3), 406–416 (2010)].
A. A. Movchan, I.A. Movchan, L.G. Sil’chenko, “Effect of Structural Transformation and Deformation Nonlinearity on the Stability of a Shape Memory Alloy Rod,” Izv. Akad. Nauk. Mekh. Tverd. Tela, No. 6, 137–147 (2010) [Mech. Solids (Engl. Transl.) 45 (6), 876–884 (2010)].
A. A. Movchan, I.A. Movchan, L.G. Sil’chenko, “Taking into Account the Martensite Inelasticity in the Reverse Phase Transformation in ShapeMemory Alloys,” Izv.Akad. Nauk.Mekh. Tverd. Tela, No. 2, 44–56 (2011) [Mech. Solids (Engl. Transl.) 46 (2), 194–203 (2011)].
A. A. Movchan, S. A. Kazarina, I. V. Mishustin, and I. A. Movchan, “Thermodynamical Justification of the Model of Nonlinear Deformation of ShapeMemory Alloys in Phase and Structure Transformations,” Deform. Razrush. Mater., No. 8, 2–9 (2009).
E. V. Lomakin, “ConstitutiveModels ofMechanical Behavior ofMedia with Stress State DependentMaterial Properties,” Adv. Struct. Mater. 7, 339–350 (2011).
Y. Liu, Z. Xie, J. van Humbeck, and L. Delay,“Asymmetry of Stress-Strain Curves under Tension and Compression for NiTi Shape Memory Alloys,” Acta Mater. 46 (12), 4325–4348 (1998).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.E. Mashikhin, A.A. Movchan, 2016, published in Izvestiya Akademii Nauk, Mekhanika Tverdogo Tela, 2016, No. 3, pp. 100–114.
About this article
Cite this article
Mashikhin, A.E., Movchan, A.A. Problem of direct martensite transformation in a thick-walled cylinder made of shape memory alloy. Mech. Solids 51, 321–333 (2016). https://doi.org/10.3103/S0025654416030092
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0025654416030092