Abstract
Attention focuses on the application of powder coatings and the shaping of hard alloys from powder mixtures (chromium carbide + metals) in explosive machining. The loading conditions are investigated as a function of the properties of the metal binder, as well as its structure, hardness, and antifrictional behavior.
Similar content being viewed by others
References
Krokhalev, A.V., Kharlamov, V.O., Kuz’min, S.V., and Lysak, V.I., Producing wear-resistant coatings from a powder mixture of chromium carbide and metallic binder by explosive technology, Izv. Volgogradsk. GTU, Ser. Svarka Vzryvom Svoist. Svarn. Soed., 2010, vol. 4, no. 5(65), pp. 117–122.
Krokhalev, A.V., Kharlamov, V.O., Kuz’min, S.V., and Lysak, V.I., Formation of hard alloys from a powder mixture of chromium carbide and titanium by explosive technology, Izv. Vyssh. Uchebn. Zaved., Poroshk. Metall. Funkts. Pokryt., 2012, no. 1, pp. 32–37.
Kharlamov, V.O., Kharlamov, V.O., Kuz’min, S.V., and Lysak, V.I., Computer calculation of the compressive parameters in the explosive application of powder coatings, Izv. Volgogradsk. GTU, Ser. Svarka Vzryvom Svoist. Svarn. Soed., 2010, vol. 4, no. 5(65), pp. 110–116.
Krasulin, Yu.L. and Nazarov, G.Z., Mikrosvarka davleniem (Pressure Microwelding), Moscow: Metallurgiya, 1976.
Krokhalev, A.V., Determining the size and deformation of carbide particles in hard alloys produced by explosive technology, Izv. Volgogradsk. GTU, Ser. Svarka Vzryvom Svoist. Svarn. Soed., 2012, no. 14, pp. 120–125.
Krokhalev, A.V., Avdeyuk, O.A., and Janta, A.I., Experimental investigation of the frictional conditions in slip bearings, Izv. Volgogradsk. GTU, Ser. Progressivn. Tekhnol. Mashinostr., 2011, vol. 7, no. 36(86), pp. 20–23.
Kharlamov, V.O., Krokhalev, A.V., Kuz’min, S.V., et al., Increasing the binding strength of explosive Cr3C2-Ti coatings with the steel base, Izv. Volgogradsk. GTU, Ser. Svarka Vzryvom Svoist. Svarn. Soed., 2012, no. 14, pp. 110–119.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Krokhalev, O.A. Avdeyuk, K.V. Prikhod’kov, A.N. Savkin, S.V. Kuz’min, V.I. Lysak, 2013, published in Vestnik Mashinostroeniya, 2013, No. 11, pp. 45–48.
About this article
Cite this article
Krokhalev, A.V., Avdeyuk, O.A., Prikhod’kov, K.V. et al. Explosive coating with hard alloys. Russ. Engin. Res. 34, 85–88 (2014). https://doi.org/10.3103/S1068798X14020099
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X14020099