Abstract
The paper presents the studies of mono- and multicomponent nitride vacuum and plasma coatings (Ti100 − x Al x )N, etc. at interrupted cutting. The contact processes during milling and the effect of the coatings on cutting forces, coefficient of friction, tool surface tension, and tool vibration due to variable tangential forces are considered. The influence of the coatings on abrasive wear resistance and resistance to cracking at variable thermal power loading is proved.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Sobol’, O.V., Andreev, A.A., Grigor’ev, S.N., Gorban’, V.F., Volosova, M.A., Aleshin, S.V., and Stolbovoi, V.A., Effect of high-voltage pulses on the structure and properties of titanium nitride vacuum-arc coatings, Metal Sci. Heat Treat., 2012, vol. 54, pp. 195–203.
Andreev, A.A., Grigoriev, S.N., Volosova, M.A., and Gorban’, V.F., Vacuum-arc multilayer nanostructured TiN/Ti coatings: structure, stress state, properties, Metal Sci. Heat Treat., 2012, vol. 54, pp. 28–33.
Volosova, M.A. and Kuzin, V.V., Regular features of wear of cutting plates from oxide and nitride ceramics, Metal Sci. Heat Treat., 2012, vol. 54, pp. 41–46.
Sobol’, O.V., Andreev, A.A., Grigoriev, S.N., et al. Physical characteristics, structure and stress state of vacuum-arc TiN coating, deposition on the substrate when applying high-voltage pulse during the deposition, Probl. At. Sci. Technol., 2011, no. 4, 174–177.
Gurin, V.D., Grigor’ev, S.N, and Sinopal’nikov, V.A., Contact Phenomenon Peculiarities on tool front surface with wear-resistant coating at interrupted cutting Uprochnyayushchie Tekhnologii i Pokrytiya, 2007, no. 7, pp. 45–51.
Grigoriev, S.N., Sinopalnikov, V.A., Tereshin, M.V., and Gurin, V.D., Control of parameters of the cutting process on the basis of diagnostics of the machine tool and workpiece, Measur. Techn., 2012, vol. 55, pp. 555–558.
Sarwar, M. and Haider, J., Characteristics and machining performance of TiN and TiAlN coatings on a milling cutter, AIP Conf. Proc., 2010, no. 1315, pp. 1005–1010.
Grigoriev, S.N., Metel, A.S., and Fedorov, S.V., Modification of the structure and properties of high-speed steel by combined vacuum-plasma treatment, Metal Sci. Heat Treat., 2012, vol. 54, pp. 8–12.
Pei, Y., Jianxin, D., Ze, W., et al. Li, S., Xing, Y., and Zhao, H., Friction and wear behavior of the PVD (Zr,Ti)N coated cemented carbide against 40Cr hardened steel, Int. J. Refr. Metals Hard Mater., 2012, vol. 35, pp. 213–220.
Zhao, Y.H., Hu, L., Lin, G.Q., Xiao, J.Q., Dong, C., and Yu, B.H., Deposition, microstructure and hardness of TiN/(Ti, Al)N multilayer films, Int. J. Refr. Metals Hard Mater., 2012, vol. 32, pp. 27–32.
Volosova, M.A., Grigor’ev, S.N., and Mogilevskii, A.M., Study of effectivity of nanocoating infliction on end milling hard-alloyed cutters, Vestnik MGTU “Stankin”, 2011, no. 2, pp. 24–30.
Fominskii, V.Yu., Grigoriev, S.N., Gnedovets, A.G., and Romanov, R.I., Specific features of ion-initiated processes during pulsed laser deposition of MoSe2 coatings in pulsed electric fields, Techn. Phys. Lett., 2012, vol. 38, pp. 683–686.
Cherkasova, N.Yu. and Volosova, M.A., Increase of exploitation parameters of cutting ceramic plates by surface mechanical and ion-plasma treatment, Stanki Instrum., 2012, no. 12, pp. 19–23.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © M.A. Volosova, V.D. Gurin, 2013, published in Trenie i Iznos, 2013, Vol. 34, No. 3, pp. 246–254.
About this article
Cite this article
Volosova, M.A., Gurin, V.D. Influence of vacuum-plasma nitride coatings on contact processes and a mechanism of wear of working surfaces of high-speed steel cutting tool at interrupted cutting. J. Frict. Wear 34, 183–189 (2013). https://doi.org/10.3103/S1068366613030148
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366613030148