Abstract
This paper presents the setup and running of a hardware-in-loop (HIL) simulation for an active heave compensated (AHC) draw-works. A simulation model of the draw-works is executed on a PC to simulate the AHC draw-works with a physical PLC. The PLC (ET200S) is configured with a controller architecture that regulates the motor angular displacement and velocity through actuation of the servo valves. Furthermore, a graphical user interface is developed for operation of the AHC system. The HIL test allowed tuning of the physical controller in terms of heave stabilization and positioning. The conclusion after the testing is a PLC which is ready for operation without necessitating the use a physical prototype of the process.
Similar content being viewed by others
References
Hanselmann H., Hardware-in-the loop simulation as a standard approach for development, customization, and production test of ECU’s in 1993 Int. Pacific Conf. On Automotive Engineering
Ping E.P., Hudha K., Jamaluddin H.. Hardware-in-the-loop simulation of automatic steering control for lanekeeping manoeuvre: outer-loop and inner-loop control design, Int. J. Vehicle Safety, Vol. 5, No. 1, 2010, pp. 35–59
Rankin D.J., Jiang J., A Hardware-in-the-loop simulation platform for the verification of safety control systems, IEEE Trans. on Nuclear Science, Vol 58, No. 2, April 2011, pp. 468–478
Allegre A.L., Bouscayrol A., Verhille J.N., Delarue P., et al., Reduced-Scale-Power Hardware-in-the-loop simulation of an innovative subway, IEEE Trans. on Industrial Electronics, Vol. 57, No. 4, April 2010, pp. 1175–1185
Palladino A., Fiengo G., Lanzo D., A portable hardware-in-the-loop (HIL) device for automotive diagnostic control systems, ISA Transactions, in press, corrected proof, November 2011
Gans N.R., Dixon W.E., Lind R., Kurdila A., A hardware in the loop simulation platform for vision-based control of unmanned air vehicles, Mechatronics, Vol. 19, No. 7, October 2009, pp. 1043–1056
Karpenko M., Sepehri N., Hardware-in-the-loop simulator for research on fault tolerant control of electrohydraulic actuators in a flight control application, Mechatronics, 19(7), October 2009, pp. 1067–1077
Cai G., Chen B.M., Lee T.H., Dong M., Design and implementation of a hardware-in-the-loop simulation system for small-scale UAV helicopters, Mechatronics, 19(7), October 2009, pp. 1057–1066
Gu P., Walid A.A., Iskandarani Y., Karimi H.R., Modeling, simulation and design optimization of a hoisting rig active heave compensation system, International Journal of Machine Learning and Cybernetic, in press, November 2011
Korde Umesh A., Active heave compensation on drillships in irregular waves, Ocean engineering, Vo1. 25, No 7, 1998, pp. 541–561
Li H.J., Hu S.L.J., Jakubiak C., H2 active vibration control for offshore platform subjected to wave loading, J. Sound Vib., Vol. 263, 2003, pp. 709–724
Neupert J., Mahl T., Haessig B., Sawodny O., et al., A Heave Compensation Approach for Offshore Cranes, 2008 American Control Conference, Westin Seattle Hotel, Seattle, Washington, USA, June 11–13, 2008
Li L., Liu S., Modeling and simulation of activecontrolled heave compensation system of deep-sea mining based on dynamic vibration absorber, Proceedings of the 2009 IEEE International Conference on Mechatronics and Automation August 9–12, Changchun, China, pp. 1337–1341
Fleming P.J., Purshouse R.C., Evolutionary algorithms in control systems engineering: a survey, Control engineering practice, Vol. 10(11), 2002, pp. 1223–1241
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Muraspahic, S., Gu, P., Farji, L. et al. Hardware-in-the-loop implementation for an active heave compensated drawworks. cent.eur.j.eng 2, 201–211 (2012). https://doi.org/10.2478/s13531-011-0062-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.2478/s13531-011-0062-1