Abstract
The assessment of the mechanical properties of existing timber elements could benefit from the use of probabilistic information gathered at different scales. In this work, Bayesian Probabilistic Networks are used to hierarchically model the results of a multi-scale experimental campaign, using different sources of information (visual and mechanical grading) and different sample size scales to infer on the strength and modulus of elasticity in bending of structural timber elements. Bayesian networks are proposed for different properties and calibrated using a large set of experimental tests carried out on old chestnut (Castanea sativa Mill.) timber elements, recovered from an early 20th century building. The obtained results show the significant impact of visual grading and stiffness evaluation at different scales on the prediction of timber members’ properties. These results are used in the reliability analysis of a simple timber structure, clearly showing the advantages of a systematic approach that involves the combination of different sources of information on the safety assessment of existing timber structures.
Similar content being viewed by others
References
JCSS (2006) JCSS Probabilistic Model Code, Part 3: Resistance Models – 3.5 Properties of Timber. Probabilistic Model Code. Joint Committee on Structural Safety
Cavalli A, Togni M (2013) How to improve the on-site MOE assessment of old timber beams combining NDT and visual strength grading. Nondestruct Test Eva 28(3):252–262
Bonamini G, Togni M, Uzielli L (1995) The strength and stiffness of large ancient timber beams: experimental assessment of the effectiveness of combined visual grading and non-destructive testing. In: 1st international conference on science and technology for the safeguard of cultural heritage in the Mediterranean Basin, Catania
Feio A, Machado JS (2015) In-situ assessment of timber structural members: combining information from visual strength grading and NDT/SDT methods - A review. Const Build Mater. doi:10.1016/j.conbuildmat.2015.05.123
Faggiano B, Grippa MR, Marzo A, Mazzolani FM (2011) Experimental study for non-destructive mechanical evaluation of ancient chestnut timber. J Civ Struct Health Monitor 1(3):103–112
Sousa HS, Sørensen JD, Kirkegaard PH, Branco JM, Lourenço PB (2013) On the use of NDT data for reliability-based assessment of existing timber structures. Eng Struct 56:298–311. doi:10.1016/j.engstruct.2013.05.014
Calderoni C, De Matteis G, Giubileo C, Mazzolani FM (2010) Experimental correlations between destructive and non-destructive tests on ancient timber elements. Eng Struct 32(2):442–448
Bertolini C, Brunetti M., Cavallero P, Macchioni N (1998) A non destructive diagnostic method on ancient timber structures: some practical application examples. In: WCTE98, 5th world conference on timber engineering, Montreaux
Vega A, Dieste A, Guaita M, Majada J, Baño V (2012) Modelling of the mechanical properties of Castanea sativa Mill. structural timber by a combination of non-destructive variables and visual grading parameters. Eur J Wood Wood Prod 70(6):839–844. doi:10.1007/s00107-012-0626-7
Isaksson T (1999) Modelling the variability of bending strength in structural timber. Report TVBK-1015, Dept. of Structural Engineering, Lund University
Denzler JK (2007) Modellierung des Größeneffektes bei biegebeanspruchtem Fichtenschnittholz. Ph.D. dissertation, Technische Universität München
Fink G, Deublein M, Kohler J (2011) Assessment of different knot-indicators to predict strength and stiffness properties of timber boards. In: Proceedings of the 44th meeting, international Council for Research and Innovation in Building and Construction, Working Commission W18, Timber Structures, Alghero, Italy, CIB-W18, Paper No. 44-5-1
Fink G, Kohler J (2014) Model for the prediction of the tensile strength and tensile stiffness of knot clusters within structural timber. Eur J Wood Wood Prod 72(3):331–341. doi:10.1007/s00107-014-0781-0
Madsen B (1992) Structural behaviour of timber, chapter 6: Duration of load. Timber engineering LTD, Canada. ISBN 0-9696162-0-1
Barrett JD, Foschi RO (1978) Duration of load and probability of failure in wood. Part 1: modelling creep rupture. Can J Civil Eng 5(40):505–514
Gerhards CC (1979) Time-related effects on wood strength: a linear cumulative damage theory. Wood Sci 11(3):139–144
Deublein M, Schlosser M, Faber MH (2011) Hierarchical modeling of structural timber material properties by means of Bayesian Probabilistic Networks. In: Faber M, Köhler J, Nishijima K (eds) Applications of Statistics and Probability in Civil Engineering. Taylor & Francis Group, London, pp 1377–1385
Sousa HS, Branco JM, Lourenço PB (2015) Use of bending tests and visual inspection for multi-scale experimental evaluation of chestnut timber beams stiffness. J Civil Eng Manag. doi:10.3846/13923730.2014.914083
UNI (2004) UNI 11119:2004 Cultural heritage - wooden artifacts - load-bearing structures - on site inspections for the diagnosis of timber members. UNI Milano
Sousa HS, Branco JM, Lourenço PB (2013) Effectiveness and subjectivity of visual inspection as a method to assess bending stiffness and strength of chestnut elements. Adv Mat Materials Res 778:175–182. doi:10.4028/www.scientific.net/AMR.778.175
CEN (2010) EN 408:2010 - Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties, European Committee for Standardization, Brussels
Solli KH (2000) Modulus of elasticity - local or global values. In: WCTE2000, 6th world conference on timber engineering, Whistler
Pearl J (1988) Probabilistic reasoning in intelligent systems: networks of plausible inference. Morgan Kaufmann Publishers, Inc., San Mateo
Jensen FV (2001) Bayesian Networks and Decision Graphs. New York Springer
Aguilera PA, Fernández A, Fernández R, Rumí R, Salmerón A (2011) Bayesian networks in environmental modelling. Environ Model Softw 26(12):1376–1388. doi:10.1016/j.envsoft.2011.06.004
Weber P, Medina-Oliva G, Simon C, Iung B (2012) Overview on Bayesian networks applications for dependability, risk analysis and maintenance areas. Eng Appl Artif Intel 25(4):671–682. doi:10.1016/j.engappai.2010.06.002
Czomch I, Thelandersson S, Larsen H (1991) Effect of within member variability on bending strength of structural timber. In: Proceedings of the CIB-W18 Meeting 24, Paper 24-6-3, Oxford
Köhler J (2007) Reliability of Timber Structures. Ph.D. dissertation, Department of Civil, Environmental and Geomatic Engineering, Zurich, ETH Zurich
Hugin (2008) Hugin Researcher, Aalborg, Hugin Experts A/S
Brites RD, Lourenço PB, Machado JS (2012) A semi-destructive tension method for evaluating the strength and stiffness of clear wood zones of structural timber elements in-service. Constr Build Mater 34:136–144. doi:10.1016/j.conbuildmat.2012.02.041
Kloiber M, Drdácký M, Machado JS, Piazza M, Yamaguchi N (2015) Prediction of mechanical properties by means of semi-destructive methods: a review. Constr Build Mater 101:1215–1234. doi:10.1016/j.conbuildmat.2015.05.134
Piazza M, Riggio M (2008) Visual strength-grading and NDT of timber in traditional structures. J Build Appraisal 3(4):267–296
CEN (2009) EN 338:2009. Structural timber - Strength classes. CEN European Committee for Standardization, Brussels
JCSS (2001) JCSS Probabilistic Model Code, Part 2: Load Models. Probabilistic Model Code, Joint Committee on Structural Safety
Ranta-Maunu A (2004) Theoretical and practical aspects of the reliability analysis of timber structures. In: WCTE 2004 conference, Lahti
Faber MH, Sørensen JD (2003) Reliability based code calibration – the JCSS approach. In: ICASP9, vol. 2. San Francisco, pp. 927–935
Hansen PF, Sørensen JD (2002) Reliability-based code calibration of partial safety factors. In: Joint Committee of Structural Safety, JCCS-Workshop on Code calibration
Köhler J, Fink G (2012) Reliability Based Code Calibration of a Typical Eurocode 5 Design Equations. In: WCTE 2012 conference, vol. 4. Auckland, pp 99–103
CEN (2004) EN 1995-1-1:2004, Eurocode 5: design of timber structures. Part 1-1: General common rules and rules for buildings, CEN European Committee for Standardization, Brussels
CEN (2002) EN 1990:2002, Eurocode 0: Basis of Structural Design, European Committee for Standardization, Brussels
Acknowledgments
The financial support of the Portuguese Science Foundation (Fundação de Ciência e Tecnologia, FCT), through Ph.D. Grant SFRH/BD/62326/2009, is gratefully acknowledged. The authors acknowledge also the support of Augusto de Oliveira Ferreira e Ca., Lda. (offer of specimens).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sousa, H.S., Branco, J.M., Lourenço, P.B. et al. Inference on stiffness and strength of existing chestnut timber elements using Hierarchical Bayesian Probability Networks. Mater Struct 49, 4013–4028 (2016). https://doi.org/10.1617/s11527-015-0770-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1617/s11527-015-0770-8