Abstract
Fracture surfaces have, no doubt, been studied throughout the history of mankind, probably starting with observations on stone-age tools. In the 16th to 18th centuries, the macroscopic appearance of fracture surfaces was used to assess the quality of metallic materials, with studies by Réaumur in 1722 being the most notable. However, it was not until 1943 that fracture surfaces were first examined at high magnifications (using optical microscopy up to 1000 ×), and that the first attempts were made to examine replicas of fracture surfaces using transmission electron microscopy (TEM). Early replicas had poor fidelity and resolution, and it was not until 1956 that Crussard et al. pioneered high-resolution TEM fractography using shadowed, direct-carbon replicas. This technique (and its subsequent variations) revolutionized fractography and led to a plethora of studies in the 1960's and 70's. It therefore seems appropriate to commemorate the 50th anniversary of high-resolution electron fractography with a review of how it, and subsequent scanning electron microscopy (SEM) and other techniques, have led to a better understanding of fracture processes. Such understanding has been invaluable in failure analysis and in developing improved materials. Milestone observations for a number of important models of fracture in inert environments including cleavage, brittle intergranular fracture, dimpled overload fractures, and fatigue fractures, are described first, followed by examples of key observations for fractures produced in embrittling environments.
Similar content being viewed by others
References
A. Phillips:An Introduction to Crystallography, 3rd ed., Longmans, 1963, and references therein.
Fractography, Vol. 12,Metals Handbook, 9th ed., ASM International, 1987, and references therein.
C.S. Smith:A History of Metallography, MIT Press, 1988, and references therein.
J.E. Stead:The Crystalline Structure of Iron and Steel, Iron and Steel Inst., 1898, pp. 145–205.
C.A. Zapffe and G.A. Moore: “A Micrographic Study of the Cleavage of Hydrogenized Ferrite,”Trans. AIME, 1943,154, pp. 335–359.
C.A. Zapffe and M. Clogg, Jr.: “Fractography—A New Tool for Metallurgical Research,”Trans. ASM, 1945,34, pp. 71–107.
D. Hull and P. Beardmore: “Velocity of Cleavage Cracks in Tungsten,”Int. J. Fract. Mech., 1966,2, pp. 468–87.
C. Crussard, R. Borione, J. Plateau, Y. Morillon, and F. Maratray: “A Study of Impact Tests and the Mechanism of Brittle Fracture,”J. Iron Steel Inst., 1956,183, pp. 146–77.
C.D. Beachem: “Microscopic Fracture Processes”,Fracture, An Advanced Treatise, Microscopic and Macroscopic Fundamentals, Vol. 1, H. Liebowitz, Ed., Academic Press, New York, 1968.
G. Henry and J. Plateau:La Microfractographie, Editions Metaux, France, 1967.
O.Yu. Kolesnychenko, R. de Kort, and H. van Kempen: “Atomically Flat Ultra-Clean Cr (001) Surfaces Produced by Cleavage of a Single Crystal: Scanning Tunneling Microscopy and Spectroscopy Study,”Surf. Sci., 2001,490, pp. L573–78.
A.A. Griffith: “The Phenomena of Rupture and Flow in Solids,”Philos. Trans. R. Soc. (London) A, 1921,221, pp. 163–98.
J. Reidle, P. Gumbsch, and H.F. Fishmeister: “Cleavage Anisotropy in Tungsten Single Crystals,”Phys. Rev. Lett., 1996,76, pp. 3594–97.
J.F. Knott: “Micro-Mechanisms of Fracture and the Fracture Toughness of Engineering Alloys,”Fracture 1977, Vol. 1, D.M.R. Taplin, Ed., University of Waterloo Press, Canada, ICF4, 1977, pp. 61–92.
P.W. Palmberg and H.L. Marcus: “An Auger Spectroscopic Analysis of the Extent of Grain Boundary Segregation,”Trans. ASM, 1969,62, pp. 1016–18.
D.F. Stein, A. Joshi, and R.P. LaForce: “Studies Utilising Auger Electron Emission Spectroscopy on Temper Embrittlement in Low Alloy Steels,”Trans. ASM, 1969,62, pp. 776–83.
C.L. Briant and S.K. Banerji: “Integranular Failure in Steel: The Role of Grain-Boundary Composition,”Int. Met. Rev., 1978,232 (No. 4), pp. 164–99.
E.W. Hart: “Two-Dimensional Phase Transformations in Grain Boundaries,”Scr. Metall., 1968,2, pp. 179–80.
S.P. Lynch and B.C. Muddle, and T. Pasang: “Mechanisms of Brittle Intergranular Fracture in Al−Li Alloys and Comparison with Other Alloys,”Philos. Mag. A., 2002,82, pp. 3361–73.
R.H. Van Stone, T.B. Cox, J.R. Low, Jr., and J.A. Psioda: “Microstructural Aspects of Fracture by Dimpled Rupture,”Int. Met. Rev., 1985,30, pp. 157–78.
D.A. Ryder and A.C. Smale: “A Metallographic Study of Tensile Fractures in Aluminium-Copper and Aluminum-Copper-Zinc-Magnesium Alloys,”Fracture of Solids, D.C. Drucker and J.J. Gilman, Ed., Interscience Pub., London, 1963, pp. 237–59.
S.P. Lynch: “The Influence of Microstructure on the Fatigue and Tensile-Deformation and Fracture Characteristics of Aluminium-Zinc-Magnesium Alloys,” Ph.D. Thesis, University of Manchester, 1969.
S.P. Lynch: “Ductile and Brittle Crack Growth: Fractography, Mechanisms and Criteria,”Mater. Forum, 1988,11, pp. 268–83.
D.A. Meyn and E.J. Brooks: “Microstructural Origin of Flutes and Their Use in Distinguishing Striationless Fatigue from Stress-Corrosion Cracking in Titanium Alloys,”Fractography and Materials Science, STP 733, L.N. Gilbertson and R.D. Zipp, Ed., ASTM, 1981, pp. 5–31.
J.C. Williams, R.R. Boyers and M.J. Blackburn: “The— Influence of Microstructure on the Fracture Topography of Titanium Alloys,”Electron Microfractography, STP 453, ASTM, 1969, pp. 215–35.
J. Glynn: “On the Causes of Fracture of the Axles of Railway Carriages,”Minutes Proc. Inst. Civ. Eng., London, 1844,3, pp. 202–03.
H.J. Gough:The Fatigue of Metals, Ernest Benn Ltd., London, 1926.
R. Cazaud:Fatigue of Metals, 1948, Translated by A.J. Fenner, Chapman & Hall, Ltd., London, 1953.
C.A. Zapffe and C.O. Worden: “Fractographic Registrations of Fatigue,”Trans. ASM, 1951,43, pp. 958–69.
R. Crussard:Int. Conf. on Fatigue of Metals, Inst. of Mech. Eng., 1956, p. 748.
P.J.E. Forsth: “The Application of ‘Fractography’ to Fatigue Failure Investigations,” Technical Note MET 257, Royal Aircaft Establishment, Farnborough, U.K., Mar 1957.
D.A. Ryder: “Some quantitative Information Obtained from the Examination of Fatigue Fracture Surfaces,” Technical Note MET 288, Royal Aircraft Establishment, Farnborough, U.K., Sep 1958; see also P.J.E. Forsyth and D.A. Ryder: “Some Results Derived from the Microscopic Examination of Crack Surfaces,”Aices. Eng., 160, pp. 96–99.
J.C. McMillan and R.M.N. Pelloux: “Fatigue Crack Propagation under Programmed and Random Load,”Fatigue Crack Propagation, STP 415, ASTM, 1967, pp. 505–35.
D.A. Meyn: “Observations on Micromechanisms of Fatigue-Crack Propagation in 2024 Aluminium”,Trans. ASM, 1968,61, pp. 42–51.
R.M.N. Pelloux: “Crack Extension by Alternating Shear,”Eng. Fract. Mech., 1970,1, pp. 697–704.
G.C. Garrett and J.F. Knott: “Crystallographic Fatigue Crack Growth in Aluminium Alloys,Acta Metal., 1975,23, pp. 841–48.
P. Rieux, J. Driver, and J. Rieu: “Fatigue Crack Propagation in Austenitic Stainless Steel Single Crystals,”Acta Metall., 1979,27, pp. 145–53.
K.J. Nix and H.M. Flower: “The Micromechanisms of Fatigue Crack Growth in a Commerical Al−Zn−Mg−Cu Alloy,”Acta Metall., 1982,30, pp. 1549–59.
D.L. Davidson and J. Lankford: “Fatigue Crack Growth in Metals and Alloys: Mechanisms and Micromechanisms,”Int. Mater. Rev., 1992,37, pp. 45–76.
N.M. Grinberg: “Stage II Fatigue Crack Growth,”Int. J. Fatigue, 1984,6, pp. 229–42.
J. Kiese, A. Gysler, and G. Lütjering: “Fatigue Crack Propagation Mechanisms in Al-Alloys under Variable Amplitude Loading,”Fatigue 90, H. Kitagawam and T. Tanaka, Ed., 1990, pp. 1523–28.
F.O. Riemelmoser, R. Pippan, and H.P. Stüwe: “An Argument for a Cycle-by-Cycle Propagation of Fatigue Cracks at Small Stress Intensity Ranges,Acta Mater., 1998,46, pp. 1793–99.
D. Broek: “Some Contributions of Electron Fractography to the Theory of Fracture,”Int. Metall. Rev., 1974,19, pp. 135–82.
W.H. Johnson: “On the Remarkable Changes Produced in Iron and Steel by the Action of Hydrogen and Acids,”Proc. R. Soc. (London), 1874–1875,23, pp. 168–80.
S.P. Lynch: “Environmentally Assisted Cracking: Overview of Evidence for an Adsorption-Induced Localised-Slip Process,”Acta Metall., 1988,36, pp. 2639–61, and reference therein.
S.P. Lynch: “Metallographic Contributions to Understanding Mechanisms of Environmentally Assisted Cracking,”Metallography, 1989,23, pp. 147–71.
A.R.C. Westwood, C.M. preece, and M.H. Kamdar: “Application of a Crack Propagation Criterion to LME: Clevage of Aluminum Monocrystals in Liquid Gallium,”Trans. ASM, 1967,60, pp. 211–13.
C.A. Zapffe and C.E. Sims: “Hydrogen Embrittlement, Internal Stress and Defects in Steel,”Trans. AIME, 1941,145, pp. 225–61.
A. Phillips, V. Kerlins, and B.V. Whiteson:Electron Fractography Handbook, MCIC-HB-8, Metals and Ceramics Info. Ctr., Columbus, OH, 1976; originally published as Report AFML-TR-64-416, Air Force Systems Command, Wright-Patterson AFB, OH, Jan 1965.
A.R. Troiano: “The Role of Hydrogen and Other Interstitials in the Mechanical Behavior of Metals,”Trans. ASM, 1960,52, pp. 54–80.
C.D. Beachem: “A New Model for Hydrogen Assisted Cracking (Hydrogen Embrittlement),”Metall. Trans., 1972,3, pp. 437–51.
H.K. Birnbaum and P. Sofronis: “Hydrogen-enhanced Localised Plasticity— A Mechanism for Hydrogen-Related Fracture,”Mater. Sci. Eng. A, 1994,176, pp. 191–202.
S.P. Lynch: “Mechanisms of Hydrogen Assisted Cracking— A Review,”Hydrogen Effects on Materials Behavior and Corrosion Deformation Interactions, N.R. Moody et al., Ed., TMS, 2003, pp. 449–66, and references therein.
H. Vehoff and H.-K. Klameth: “Hydrogen Embrittlement and Trapping at Crack Tips in Ni-Single Crystals,”Acta Metall., 1985,33, pp. 955–62.
X. Chen and W.W. Gerberich: “The Kinetics and Micromechanics of Hydrogen-Assisted Cracking in Fe-3 Pct Si Single Crystals,”Metall. Trans. A, 1991,22, pp. 59–70.
S. Gahr, M.L. Grossbeck, and H.K. Birnbaum: “Hydrogen Embrittlement of Nb I—Microscopic Behaviour at Low Temperatures,”Acta Metall., 1977,25, pp. 125–34.
H. Moore, S. Beckinsale, and C.E. Mallinson: “The Season Cracking of Brass and Other Copper Alloys,”J. Inst. Met., 1921,25, pp. 35–152.
P.J.E. Forsyth and D.A. Ryder: “Some Results of Examination of Aluminium Alloy Specimen Fracture Surfaces,”Metallurgia, 1961,63, pp. 117–24.
G.M. Scamans: “Evidence for Crack-Arrest Markings on Integranular Stress Corrosion Fracture Surfaces in Al−Zn−Mg Alloys,”Metall. Trans. A, 1980,11, pp. 846–50.
N.A. Nielsen: “Electron Microfactography of Stress-Corrosion Cracking,”Fundamental Aspects of Stress Corrosion Cracking, R.W. Staehle, A.J. Forty, and D. Van Roogen, Ed., NACE, 1969, pp. 308–17.
J.C. Scully: “Fractographic Aspects of Stress Corrosion Cracking,“The Theory of Stress Corrosion Cracking in Alloys, J.C. Scully, Ed., North Atlantic Treaty Organization, Brussels, 1971, pp. 127–66.
J.I. Dickson, L. Shiqiong, J.P. Bailon, and D. Tromans: “The Fractography of Transgranular SCC in FCC Metals: Mechanistic Implications,”Parkins Sympsium on Fundamental Aspects of Stress Corrosion Cracking, S.M. Bruemmer et al., Ed., The Minerals, Metals & Materials Society, 1992, pp. 303–22.
“Corrosion-Deformation Interactions,”Second Int. Conf. on Corrosion-Deformation Interactions, T. Magnin, Ed., Institute of Material, Nice, France, 1996; see also “Hydrogen Effects on Materials Behavior and Corrosion Deformation Interactions,”Proceedings of the Int. Conf. on Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions (Moran, WY), R.N. Moody, et al., Ed., TMS, 2003.
H. Uhlig: “New Perspectives in the Stress Corrosion Problem,”Physical Metallurgy of Stress Corrosion Fracture, T. Rhodin, Ed., Interscience Publ., New York, 1959, pp. 1–17.
H. Nichols and W. Rostoker: “Analogies between Stress-Corrosion Cracking and Embrittlement by Liquid Metals,”Trans. ASM, 1963,56, pp. 494–507.
B.P. Haigh: “Experiments on the Fatigue of Brasses,”J. Inst. Met., 1917,18, pp. 55–86.
P.J.E. Forsyth: “A Two Stage Process of Fatigue Crack Grwoth,”Proceedings of the Crack propagation Symposium, Vol. 1, Cranfield, 1961, pp. 76–94.
R.M.N. Pelloux: “Corrosion Fatigue Crack Propagation,”Fracture 1969, Proc. Second Int. Conf. on Fracture (Brighton), Chapman and Hall, London, 1969, pp. 731–44.
D.A. Meyn: “The Nature of Fatigue-Crack Propagation in Air and Vacuum for 2024 Aluminium,”Trans. ASM, 1968,61, pp. 52–61.
General Bibliography
A. Phillips, V. Kerlins, and B.V. Whiteson:Electron Fractography Handbook, MCIC-HB-8, Metals and Ceramics Info. Ctr., Columbus, OH, 1976; originally published as report AFML-TR-64-416, Air Force Systems Command, Wright-Patterson AFB, OH, Jan 1965.
Electron Fractography, STP 436, ASTM, 1968.
G. Henry and J. Plateau:La Microfractographie, Editions Metaux, France, 1968.
Electron Microfractography, STP 453, ASTM, 1969.
D.A. Ryder: “The Elements of Fractography,”
AGARD ograph 155, Advisory Group for Aerospace Research Development (AGARD), NATO, 1971.
C.D. Beachem and W.R. Warke, Ed.:Fractography—Microscopic Cracking Processes, STP 600, ASTM, 1976.
G. Henry and D. Horstmann: “De Ferri Metallographia V,”Fractography and Microfractography, Stahleisen Verlag, Düsseldorf, m.b.H., 1979 (in English, German, and French).
G. Zimmer, L.N. Gilbertson, and R.D. Zipp, Ed.:Fractography and Materials Sciences, STP 733, ASTM, 1981.
Fractography, Vol. 12,Metals Handbook, 9th ed., ASM International, 1987.
J.E. Masters and J.J. Au, Ed.:Fractography of Modern Engineering Materials: Composites and Metals, STP 948, ASTM, 1987.
D. Hull:Fractography—Observing, Measuring and Interpreting Fracture Surface Topography, Cambridge Univ. Press, 1999.
C.R. Brooks and A. Choudhury:Failure Analysis of Engineering Materials, McGraw-Hill, 2002.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lynch, S.P., Moutsos, S. A brief history of fractography. J Fail. Anal. and Preven. 6, 54–69 (2006). https://doi.org/10.1361/154770206X156231
Received:
Issue Date:
DOI: https://doi.org/10.1361/154770206X156231