Abstract
Features of the formation and structure of plasma ceramic coatings sprayed with composite powders based on alumina and zirconia plated with nickel and aluminum are studied. The porosity and thermal conductivity of the coatings and the microhardness of the phase components are measured. It is found that a decrease in the thermal conductivity of the composite coatings caused by a decrease in the metal phase content with increasing plasmatron arc power is compensated by an increase thereof owing to a decrease in the coating porosity, which neutralizes the net effect of the arc power on the thermal conductivity of metal–ceramic coatings.
Similar content being viewed by others
References
Kudinov, V.V. and Ivanov, V.M., Nanesenie plazmoi tugoplavkikh pokrytii (Plasma Deposition of Refractory Coatings), Moscow: Mashinostroenie, 1981.
Kulik, A.Ya., Borisov, Yu.S., Mnukhin, A.S., and Nikitin, M.D., Gazotermicheskoe napylenie kompozitsionnykh poroshkov (Gas–Thermal Spraying of Composite Powders) Leningrad: Mashinostroenie, 1985.
Gazotermicheskie pokrytiya (Gas–Thermal Coatings), Antsiferov, V.A., Ed., Ekaterinburg: Nauka, 1994.
Chudnovsky, A.F., Teplofizicheskie kharakteristiki dispersnykh materialov (Thermo–Physical Properties of Disperse Materials), Moscow: Fizmatgiz, 1962.
Vasiliev, L.L. and Freidman, Yu.E., Teplofizicheskie svoistva plokhikh provodnikov tepla (Thermo–Physical Properties of Poor Heat Conductors), Moscow: Nauka, 1967.
Saltykov, S.A., Stereometricheskaya metallografiya (Stereometric Metallography), Moscow: Metallurgiya, 1970.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.M. Gusev, O.Yu. Elagina, V.B. Mordynsky, A.S. Tyuftyaev, 2015, published in Fizika i Khimiya Obrabotki Materialov, 2015, No. 6, pp. 47–51.
Rights and permissions
About this article
Cite this article
Gusev, V.M., Elagina, O.Y., Mordynsky, V.B. et al. An investigation of thermal conductivity of ceramic plasma coatings sprayed with plated powders. Inorg. Mater. Appl. Res. 7, 372–375 (2016). https://doi.org/10.1134/S2075113316030084
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113316030084