Abstract
The main stages of gluing technology—from surface preparation for gluing to control of the quality of adhesive joints—are considered. Methods of preparation for gluing of surfaces of polymer materials and metals are given. Recommendations for preparation and coating of adhesives are given. The main parameters of the adhesive curing and apparatus used are described.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
L. I. Anikhovskaya, T. G. Pavlovskaya, P. A. Dement’eva, and A. P. Petrova, “Surface preparation for gluing,” Polym. Sci. Ser. D 2(1), 50–53 (2009).
N. V. Bodrykh and G. V. Malysheva, “Technology for rechargeable battery repair using adhesives,” Remont, Vosstanovlenie, Modernizatsiya, No. 7, 2–5 (2010).
V. A. Voitovich, “Methods of surface preparation of products from metals and alloys, Klei. Germetiki. Tekhnologii, No. 9, 19–23 (2005).
D. V. Grashchenkov and L. V. Chursova, “The strategy of development of composite and functional materials,” Aviats. Mater. Tekhnol. 231–242 (2012).
V. A. Zorin and N. I. Baurova, “Repair of thermally loaded components of machines and equipment with filled polymeric materials,” Remont, Vosstanovlenie, Modernizatsiya, No. 4, 16–18 (2013).
E. N. Kablov, “Strategic directions of development of materials and technologies for their processing for the period up to 2030,” Aviats. Mater. Tekhnol. 7–17 (2012).
S. A. Karimova, T. G. Pavlovskaya, and A. P. Petrova, “Preparation of surfaces of aluminum alloys using anodic oxidation,” Polym. Sci. Ser. D (2014) (in press).
Z. N. Kolobova, T. G. Pavlovskaya, L. I. Anikhovskaya, and S. A. Karimova, in Aviation Materials and Technologies: Collected Papers, Vol.: Repair Technologies in the Aviation Industry (VIAM, Moscow, 2002), pp. 73–76 [in Russian].
Z. R. Kolobova, T. G. Pavlovskaya, L. I. Anikhovskaya, and S. A. Karimova, “Surface preparation for repair of laminated aluminum alloy structures,” Klei. Germetiki. Tekhnologii, No. 9, 16–18 (2005).
V. N. Kirillov, V. A. Efimov, A. N. Shvedkova, and E. V. Nikolaev, “Investigation of the influence of climatic factors and mechanical loading on the structure and mechanical properties of PCM,” Aviats. Mater. Tekhnol., No. 4, 41–45 (2011).
R. A. Lanikhin and G. V. Malysheva, “Adhesive technology for repair of automobile radiators,” Remont, Vosstanovlenie, Modernizatsiya, No. 9, 15–18 (2009).
N. F. Lukina, L. A. Dement’eva, A. P. Petrova, and A. A. Serezhenkov, “Structural and heat-resistant adhesives,” Aviats. Mater. Tekhnol. 328–335 (2012).
G. V. Malysheva, “Predicting the endurance of adhesive joints,” Polym. Sci. Ser. D 7(2), 145–148 (2014).
A. P. Petrova and A. A. Donskoi, Adhesives. Sealants: AHandbook (Professional, St. Petersburg, 2008) [in Russian].
A. P. Petrova and N. F. Lukina, “Application of adhesion coats and systems of surface modification during gluing,” Polym. Sci. Ser. D 7(3), 177–180 (2014).
A. P. Petrova, N. F. Lukina, and I. A. Sharova, “Evaluation of the strength of adhesive joints made of epoxy adhesives under the influence of various factors, Vse Mater. Entsiklop. Sprav., No. 8, 28–35 (2013).
S. V. Sibileva and S. A. Karimova, “Surface treatment of titanium alloys in order to ensure adhesion properties,” Polym. Sci. Ser. D (2014) (in press).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.P. Petrova, 2014, published in Klei. Germetiki. Tekhnologii, 2014, No. 2, pp. 24–30.
Rights and permissions
About this article
Cite this article
Petrova, A.P. Main stages of gluing technology. Polym. Sci. Ser. D 7, 293–297 (2014). https://doi.org/10.1134/S1995421214040121
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421214040121