Abstract
The type of heating, which determines heat transfer from an external energy source to a metallic charge, plays a key role in the process of preliminary heating of scrap metal. The type of charge heating during preliminary heating of scrap metal mainly determines the average scrap metal heating temperature and the formation of harmful substances. This article considers the existing types of charge heating in EAF baths and shaft heaters. The types of scrap metal heating that increase the energy efficiency and weaken the ecological problems related to this process in electric furnace steelmaking units are found.
Similar content being viewed by others
References
V. T. Raile, “Improvement of the heat operation and design of the shaft heater in an electric arc furnace,” Cand. Sci. (Eng.) Dissertation, Chelyabinsk, 2010.
Yu. A. Gudim, I. Yu. Zinurov, A. D. Kiselev, and A. M. Shumakov, “Rational methods of heat intensification in modern electric arc furnaces,” Vestn. YuzhnoUral’sk. Gos. Univ., No. 9 (109), 10–13 (2008).
H. Pfeifer, “Energiebilanzen des drehstrom-lichtbogenofens,” in Seminar Elektro-technik des Lichtbogenofens (Kehl, 2000), p. 35.
A. Friedacher, “Untersuchungen zur reduktion der dioxin. Furan emissionen in abgasen von elektrolichtbogenofen,” Dissertation, Leoben, Institut fur Verfahrenstechnik des Industriellen Umweltschutzes. Montanuniversitat, 2004, p. 40.
R. Scholz and C. Weichert, in Beurteilung des Energieeinsatzes bei der Elektrostahlerzeugung in einem Lichtbogenofen mit Schrott-vorwarmung und Abgasnachverbrennung (Technische Universitat Clausthal. Institut für Energieverfahrenstechnik und Brenn-stofftechnik, 2007), p. 1.
V. T. Raile, “Challenging problems of preliminary heating of scrap in electric furnace steelmaking,” Elektrometallurgiya, No. 9, 42–46 (2009).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V. Raile, 2012, published in Elektrometallurgiya, 2012, No. 5, pp. 26–34.
Rights and permissions
About this article
Cite this article
Raile, V. Methods for increasing the efficiency of heating scrap metal in electric arc furnaces. Russ. Metall. 2013, 450–457 (2013). https://doi.org/10.1134/S0036029513060141
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029513060141