Abstract
Lead leakage from damaged perovskite solar modules during rainfall poses a serious threat to the environment and human health. Strategies to replace lead have seen little success to date, while the encapsulation approaches tend to compromise the low-cost advantage of perovskites. Coating lead-adsorbing layers on glass surfaces may help to reduce the risk; however, these layers are vulnerable to either saturation or contamination by rain or dust. Here we report a new device structure that incorporates a low-cost mesoporous sulfonic acid-based lead-adsorbing resin into perovskites as a scaffold, which immobilizes lead ions inside the scaffold even if perovskites are exposed to rainwater. Introducing the insulating scaffold not only does not decrease the device efficiency, but also can be scaled up to large-area modules (60.8 cm2) with an aperture efficiency of 16.3%. This structure proves more effective in preventing lead leakage than the configuration with the coating on the glass surface and is able to reduce the lead contamination of rainwater from damaged perovskite modules to 11.9 parts per billion. This solution addresses the toxicity concern of lead-based perovskites for solar cells and other applications and represents an important step towards sustainability.
Similar content being viewed by others
Data availability
The data that support the findings of this study are available from the corresponding author upon request.
References
National Renewable Energy Laboratory Best Research-Cell Efficiency Chart (NREL, accessed March 2021); https://www.nrel.gov/pv/cell-efficiency.html
Bai, S. et al. Planar perovskite solar cells with long-term stability using ionic liquid additives. Nature 571, 245–250 (2019).
Zheng, X. et al. Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells. Nat. Energy 5, 131–140 (2020).
Wang, L. et al. A Eu3+-Eu2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells. Science 363, 265–270 (2019).
Yang, S. et al. Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts. Science 365, 473–478 (2019).
Extance, A. The reality behind solar power’s next star material. Nature 570, 429–432 (2019).
Cheacharoen, R. et al. Encapsulating perovskite solar cells to withstand damp heat and thermal cycling. Sustain. Energy Fuels 2, 2398–2406 (2018).
Shi, L. et al. Gas chromatography–mass spectrometry analyses of encapsulated stable perovskite solar cells. Science 368, eaba2412 (2020).
Deng, Y. et al. Tailoring solvent coordination for high-speed, room-temperature blading of perovskite photovoltaic films. Sci. Adv. 5, eaax7537 (2019).
Deng, Y. et al. Surfactant-controlled ink drying enables high-speed deposition of perovskite films for efficient photovoltaic modules. Nat. Energy 3, 560–566 (2018).
Rong, Y. et al. Challenges for commercializing perovskite solar cells. Science 361, eaat8235 (2018).
Rajagopal, A., Yao, K. & Jen, A. K.-Y. Toward perovskite solar cell commercialization: a perspective and research roadmap based on interfacial engineering. Adv. Mater. 30, 1800455 (2018).
Ke, W. & Kanatzidis, M. G. Prospects for low-toxicity lead-free perovskite solar cells. Nat. Commun. 10, 965 (2019).
Kamat, P. V., Bisquert, J. & Buriak, J. Lead-free perovskite solar cells. ACS Energy Lett. 2, 904–905 (2017).
Wang, Y. et al. Stabilizing heterostructures of soft perovskite semiconductors. Science 365, 687–691 (2019).
Tan, H. et al. Efficient and stable solution-processed planar perovskite solar cells via contact passivation. Science 355, 722–726 (2017).
Min, H. et al. Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide. Science 366, 749–753 (2019).
Wang, R. et al. Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics. Science 366, 1509–1513 (2019).
Jiang, Y. et al. Reduction of lead leakage from damaged lead halide perovskite solar modules using self-healing polymer-based encapsulation. Nat. Energy 4, 585–593 (2019).
Song, Z. et al. A technoeconomic analysis of perovskite solar module manufacturing with low-cost materials and techniques. Energy Environ. Sci. 10, 1297–1305 (2017).
Huckaba, A. J. et al. Lead sequestration from perovskite solar cells using a metal–organic framework polymer composite. Energy Technol. 8, 2000239 (2020).
Lee, J., Kim, G. W., Kim, M., Park, S. A. & Park, T. Nonaromatic green-solvent-processable, dopant-free, and lead-capturable hole transport polymers in perovskite solar cells with high efficiency. Adv. Energy Mater. 10, 1902662 (2020).
Li, X. et al. On-device lead sequestration for perovskite solar cells. Nature 578, 555–558 (2020).
Visockis, E., Deksne, R., Teirumnieka, E. & Kobakhidze, M. Research of rain water using possibilities. In Proc. 9th International Scientific Conference: Engineering for Rural Development 123–127 (2010).
Keresztesi, Á., Nita, I.-A., Birsan, M.-V., Bodor, Z. & Szép, R. The risk of cross-border pollution and the influence of regional climate on the rainwater chemistry in the Southern Carpathians, Romania. Environ. Sci. Pollut. Res. 27, 9382–9402 (2020).
Chen, S. et al. Trapping lead in perovskite solar modules with abundant and low-cost cation exchange resins. Nat. Energy 5, 1003–1011 (2020).
Bi, C., Zheng, X., Chen, B., Wei, H. & Huang, J. Spontaneous passivation of hybrid perovskite by sodium ions from glass substrates: mysterious enhancement of device efficiency revealed. ACS Energy Lett. 2, 1400–1406 (2017).
Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls, ASTM E1038-10 (ASTM International, 2019); https://www.astm.org/Standards/E1038.htm
Acknowledgements
This work is financially supported by University of North Carolina Chapel Hill.
Author information
Authors and Affiliations
Contributions
J.H. conceived the idea. S.C. fabricated both perovskite solar cells and mini-modules and conducted lead leakage tests. Y.D. assisted the fabrication of perovskite mini-modules. X.X. performed TPV and TRPL measurements. S.X. carried out trap density measurement. P.N.R. participated in the discussions of the results. J.H. and S.C. wrote the paper. All authors reviewed the paper.
Corresponding author
Ethics declarations
Competing interests
J.H. and S.C. are inventors of an invention disclosure covering this work filed by University of North Carolina Chapel Hill. The other authors declare no competing interests.
Additional information
Peer review information Nature Sustainability thanks the anonymous reviewers for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Supplementary Information
Supplementary Figs. 1–13.
Rights and permissions
About this article
Cite this article
Chen, S., Deng, Y., Xiao, X. et al. Preventing lead leakage with built-in resin layers for sustainable perovskite solar cells. Nat Sustain 4, 636–643 (2021). https://doi.org/10.1038/s41893-021-00701-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41893-021-00701-x
- Springer Nature Limited
This article is cited by
-
Efficient tin-based perovskite solar cells with trans-isomeric fulleropyrrolidine additives
Nature Photonics (2024)
-
Preventing lead release from perovskites
Nature Sustainability (2023)
-
Room temperature nondestructive encapsulation via self-crosslinked fluorosilicone polymer enables damp heat-stable sustainable perovskite solar cells
Nature Communications (2023)
-
Preventing lead leakage in perovskite solar cells with a sustainable titanium dioxide sponge
Nature Sustainability (2023)
-
Bioinspired “cage traps” for closed-loop lead management of perovskite solar cells under real-world contamination assessment
Nature Communications (2023)