The demonstration of edge- and surface-emitting lasers made by transfer-printing epitaxial layers of compound semiconductors onto silicon substrates creates new opportunities for optoelectronics.
This is a preview of subscription content, log in via an institution to check access.
References
Baehr-Jones, T. et al. Nature Photon. 6, 206–208 (2012).
Justice, J. et al. Nature Photon. 6, 610–614 (2012).
Yang, H. et al. Nature Photon. 6, 615–620 (2012).
Liu, J. et al. Opt. Lett. 35, 679–681 (2010).
Camacho-Aguilera, R. E. et al. Opt. Express 20, 11316–11320 (2012).
Cerutti, L., Rodriguez, J. B. & Tournie, E. IEEE Photon. Tech. Lett. 22, 553–5555 (2010).
Lourdudoss, S. Curr. Opin. Solid St. M. 16, 91–99 (2012).
Liang, D. et al. Electrochem. Solid St. 12, H101–H104 (2009).
Liang, D. & Bowers, J. Electron. Lett. 45, 578–581 (2009).
Meitl, M. A. et al. Nature Mater. 5, 33–38 (2006).
Park, S. I. et al. Science 325, 977–981 (2009).
Yoon, J. et al. Nature Mater. 7, 907–915 (2008).
Bower, C. A. et al. IEEE Trans. Compon. Pack. Manufac. Technol. 1, 1916–1922 (2011).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kelsall, R. Rubber stamp for silicon photonics. Nature Photon 6, 577–579 (2012). https://doi.org/10.1038/nphoton.2012.211
Published:
Issue Date:
DOI: https://doi.org/10.1038/nphoton.2012.211
- Springer Nature Limited