The X-ray sensitivity of radiology instruments is limited by the materials used in their detectors. A material from the perovskite family of semiconductors could allow lower doses of X-rays to be used for medical imaging. See Letter p.87
References
Kim, Y. C. et al. Nature 550, 87–91 (2017).
Reiner, B. I., Siegel, E. L. & Siddiqui, K. J. Digit. Imaging 16, 324–330 (2003).
Rowlands, J. A. Phys. Med. Biol. 47, R123–R166 (2002).
Yorkston, J. & Rowlands, J. in Handbook of Medical Imaging Vol. 1 (eds Van Metter, R. L., Beutel, J. & Kundel, H. L.) 223–328 (SPIE Press, 2000).
Kojima, A., Teshima, K., Shirai, Y. & Miyasaka, T. J. Am. Chem. Soc. 131, 6050–6051 (2009).
Sutherland, B. R. & Sargent, E. H. Nature Photon. 10, 295–302 (2016).
Yakunin, S. et al. Nature Photon. 9, 444–449 (2015).
Shrestha, S. et al. Nature Photon. 11, 436–440 (2017).
Author information
Authors and Affiliations
Corresponding author
Related links
Rights and permissions
About this article
Cite this article
Rowlands, J. Material change for X-ray detectors. Nature 550, 47–48 (2017). https://doi.org/10.1038/550047a
Published:
Issue Date:
DOI: https://doi.org/10.1038/550047a
- Springer Nature Limited
This article is cited by
-
Layered BiOI single crystals capable of detecting low dose rates of X-rays
Nature Communications (2023)
-
Enhancing light yield of Tb3+-doped fluoride nanoscintillator with restricted positive hysteresis for low-dose high-resolution X-ray imaging
Nano Research (2023)
-
Vertical matrix perovskite X-ray detector for effective multi-energy discrimination
Light: Science & Applications (2022)
-
Low-dose real-time X-ray imaging with nontoxic double perovskite scintillators
Light: Science & Applications (2020)
-
Bilayer lead oxide X-ray photoconductor for lag-free operation
Scientific Reports (2020)