Abstract
Squeeze casting, also known as liquid metal forging, extrusion casting and pressure crystallization, is a process in which molten metal soldifies in a die under an applied high pressure. The concept of squeeze casting was invented in Russia over 100 years ago. Later the process was exploited in North America, Japan and Europe to produce various automotive components. With the rapid expansion of magnesium applications in the automotive industry, the development of squeeze casting technology for magnesium alloys and their composites has been motivated by incentives to produce high-quality components. The present paper reviews recent progress in squeeze casting, and the effects of process variables on the cast structure and properties of magnesium alloys and magnesium-based composites. Approaches to optimization of the squeeze-casting process are discussed. The significant advantages of squeeze-cast magnesium alloys and magnesium-based composites are highlighted. The on-going research work at ITM is presented.
Similar content being viewed by others
References
J. Hollinggrak, “Casting Metals”, UK Pat. 4371 (1819).
D. K. Chernov, “Reports of the Imperial Russian Metallurgical Society”, December 1878.
V. G. Welter, Z. Metallkde 9 (1931) 255.
V. M. Plyatskii, Russ. Casting Prod. 6 (1956) 7.
V. P. Tererdenko and T. P. Malei, Dokl. Acad. Nauk USSR 5 (1961) 263.
P. N. Bidulya and K. N. Smirnov, Stahl Eisen 81 (1961) 1146.
P. N. Bidulya, Russ. Casting Prod. September (1964) 396.
O. G. Epanchintsev, ibid. June (1972) 34.
S. Z. Uram, M. C. Flemings and H. F. Taylor, Trans. AFS 66 (1958) 129.
J. L. Resis and E. C. Kron, Modern Casting 37 (1960) 89.
V. M. Plyatskii, “Extrusion Casting” (Primary Source, New York, 1965).
J. C. Benedyk, “Squeeze Casting”, Proceedings of the Sixth SDCE International Die Casting Congress, Vol. 8 (1970) Paper 86 (NADCA).
R. F. Lynch, R. P. Olley and P. C. J. Gallagher, Trans. AFS 83 (1975) 569.
R. P. Olleyand P. C. J. Gallagher, Trans. AFS Idem, ibid 83 (1975) 561.
S. Chatterjee and A. A. Das, Br. Foundryman 65 (1972) 420.
A. A. Das, Br. Foundryman Idem, ibid. 66 (1973) 118.
S. Oya, Y. Matsuura and A. Kamio, J. Jpn Foundrymen's Soc. 40 (1968) 626.
S. Oya, Y. Matsuura and A. Kamio, Report of the Castings Research Laboratory, Waseda, University of Tokyo, (1971).
Y. Kaneko, H. Murakami, K. Kuroda and K. Nakazaki, J. Jpn Inst. Met., 23(3) (1979) 26.
Y. Wong, Manuf. Tech. J. 7(4) (1982) 31.
S. Rajagopal, J. Appl. Metalwork. ASM 1(4) (1981) 3.
J. R. Franklin and A. A. Das, Br. Foundryman 77 (1984) 150.
G. A. Chadwick and T. M. Yue, Metals Mater. 5(1) (1989) 6.
S. Suzuki, Mod. Casting 79 (1989) 38.
S. Rajagopal and W. H. Altergott, AFS Trans. 85 (1991) 145.
J. L. Dorcic and S. K. Verma, “Sqeeze Casting”, in “Metals Handbook”, 10th Edn, Vol. 15 edited by D. M. Stefanescu (ASM International, Materials Park, OH, 1990) pp. 323-637.
T. Ueno, M. Uichida and M. Sose, in “Proceedings of the 17th International Die Casting Congress and Exposition”, Cleaveland, OH, 1993, pp. 413-18.
T. Sakamoto, in “Proceedings of the 3rd International Conference on Processing of Semi-Solid Alloys and Composites, edited by M. Kiuchi (ASM, Metals Park, 1994) pp. 137-44.
F. Shehata, Process. Adv. Mater. 9 (1994) 136.
Z. W. Chen and W. R. Thorpe, Cast Metal 8(3) (1995) 179.
A. A. Das and S. Chatterjee, Metall. Mater. 42 (1981) 137.
B. Zantout, A. A. Das and J. R. Franklin, Metall. Light Alloys, 51 (1983) 215.
S. Ryu, J. Kaneko and M. Sugamata, J. Jpn. Inst. Met. 58 (1994) 1206.
P. Balan, R. M. Pillai, K. G. Satyanarayana and B. C. Pai, Can. Metall. Q. 33 (1994) 255.
R. D. Schueller, F. E. Wawner and A. K. Sachdev, J. Mater. Sci. 29 (1994) 424.
K. R. Karasek, J. Mater. Sci. Lett. 3 (1984) 232.
A. Mortense, M. N. Gunger, J. A. Cornie and M. C. Flemings, J. Metals 38(3) (1986) 30.
C. P. Ju, K. I. Chen and J. H. Chern Lin, J. Mater. Sci. 29 (1994) 5127.
C. G. Kang and G. S. Ku, J. Compos. Mater. 29 (1995) 444.
S. W. Lim and Y. Nishida, Scripta Metall. Mater. 32 (1995) 1821.
I. Tochigi, T. Imai and K. Ai, ibid. 32 (1995) 1801.
L. Geng and C. K. Yao, ibid. 32 (1995) 949.
A. Mortensen and I. Jin, Int. Mater. Rev. 37 (1992) 101.
D. A. Berger, Die Casting Management 28 (1992) 17.
G. A. Chadwick and A. Bloyce, in “Proceedings of the Conference on Magnesium Alloys and Their Applications”, Garmisch-Partenkirchen, Germany, April 1992 (DGM Informationsgesellschaft, Oberusef, 1992) 93-100.
G. A. Rozak and D. M. Goddard, in “Proceedings of the 17th International Die Casting Congress and Exposition”, Cleveland, OH, October 1993 (NADCA) pp. 419-28.
S. Guldberg, H. Westengen and D. L. Albright, “Properties of Squeeze Cast, Magnesium-Based Composites”, SAE Technical Paper Series, no. 910830 (SAE, Detroit MI, 1991).
Fazal-Ur-Rehman, S. Fox, H. M. Flower and D. R. F. West, J. Mater. Sci. 29 (1994) 1
S. Lee, K. S. Sohn, I. Park and K. M. Cho, Metals Mater. 1(1) (1995) 37.
M. Nakagawa, T. Wada, S. Kamado and Y. Kojima, J. Jpn. Inst. Light Met. 45(1) (1995) 21.
H. U. Ha, PhD thesis, Department of Engineering Materials, University of Southampton (1988).
G. A. Rozak, PhD thesis, Department of Material Science and Engineering, Case Western Reserve University (1993).
R. F. Lynch, US Pat. no. 4049040, 20 September 1977.
J. A. Sekhar, Scripta Metall. 19 (1985) 1429.
T. N. Lipchin, Russ. Casting Prod. April (1973) 109.
A. I. Batyshev, Giessereitechnik 31 (1985) 281.
M. A. Taha, N. A. Mahallawy, M. L. Zamzam and S. Ei Mardy, in “Solidification Processing, 1987”, Proceedings of the Conference of the Institute of Metals, London, UK (Institute of Metals, London, 1988) pp. 409-12.
G. R. K. Murthy and K. R. Satyanarayan, Trans. Indian Inst. Met. 41(1) (1988) 65.
N. Fujii, S. Okada, S. Morimoto and M. Fujii, J. Jpn. Inst. Light Met. 33 (1983) 392.
S. Okada, S. Morimoto and M. Fujii, J. Jpn. Inst. Light Met. Idem, ibid. 34 (1984) 446.
G. Williams and K. M. Fisher, Metals Technol. 8 (1981) 263.
D. L. Zhange and B. Cantor, Modell. Simul. Mater. Sci. Eng. 3 (1995) 121-30.
H. Hu, Institute of Magnesium Technology, unpublished work.
H. Hu, Institute of Magnesium Technology, unpublished work.
K. P. Young and K. U. Brissing, in “Proceedings of the 17th International Die Casting Congress and Exposition”, Cleveland, OH, October 1993 (NADCA), pp. 247-53.
E. W. Miguelucci, ibid., pp. 395-8.
A. Luo, H. Hu and S. H. J. Lo, in “Light Metals Symposium” edited by M. Avedesean (The Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, 1996).
E. G. Wolff, B. K. Min and M. H. Kural, J. Mater. Sci 20 (1985) 1141.
H. A. Katzman, ibid. 22 (1987) 144.
O. Ottinger, M. Gruber, C. Grau and R. F. Singer, in “High Performance Composites: Commonalty of Phenomena”, edited by K. K. Chawla, P. K. Liaw and S. G. Fishman (TMS, Warrendale PA, 1994) pp. 275-89.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hu, H. Squeeze casting of magnesium alloys and their composites. Journal of Materials Science 33, 1579–1589 (1998). https://doi.org/10.1023/A:1017567821209
Issue Date:
DOI: https://doi.org/10.1023/A:1017567821209