Abstract
Physical properties of advanced ceramics are influenced by impurities produced in the forming process. The forming compacts produced by slip casting using gypsum molds contain calcium and sulfur in green bodies. Therefore, a porous Al2O3-glass mold was produced and slip casting was performed in the present study. Porous Al2O3 ceramics as casting molds were examined in comparison with gypsum mold from viewpoints of free energy for wettability and rate of filter cake buildup. The sintered compact of Al2O3 produced by slip casting using the porous Al2O3-glass mold was compared with those using the gypsum mold. Transmittance of the sintered Al2O3 compacts using the porous Al2O3-glass molds was increased in comparison with that using the gypsum mold.
Similar content being viewed by others
References
M. P. ALBANO and L. B. GARRIDO, J. Amer. Ceram. Soc. 81 (1998) 837.
T. SHIONO and K. NODA, J. Mater. Sci. 32 (1997) 2665.
J. M. F. FRERREIRA and H. M. M. DIZ, J. Eur. Ceram. Soc. 10 (1992) 59.
F. NUNES, A. G. LAMAS, M. ALMEIDA and H. M. M. DIZ, J. Mater. Sci. 27 (1992) 6662.
A. J. RUYS and C. C. SORRELL, Am. Ceram. Soc. Bull. 69 (1990) 828.
K-S. CHOU and L-J. LEE, J. Amer. Ceram. Soc. 72 (1989) 1622.
C-D. LI, K. MANCINI and G. C. ROBINSON, Am. Ceram. Soc. Bull. 73 (1994) 70.
M. TORIYAMA, A. RAVAGRIOLI, A. KRAJEWSKI, C. GALASSI, E. RONCARI and A. PIANCASTELLI, J. Mater. Sci. 30 (1995) 3216.
U. SENTURK and M. TIMUCIN, ibid. 33 (1998) 1881.
P. A. SMITH, J. Amer. Ceram Soc. 78 (1995) 809.
H. MIZUTA, K. ODA, Y. SHIBASAKI, M. MAEDA and K. OHSHIMA, ibid. 75 (1992) 469.
R. L. COBLE, US Patent. no. 3026210 (1962).
H. MIZUTA, Y. SHIBASAKI, S. SAKAI, M. KATAGIRI and H. FUJIMOTO, Funtai oyobi Funmatu Yakin 35 (1988) 619.
V. BELTRAN, A. ESCARDINON, C. FELIU and MAD. RODRIGO, Br. Ceram. Trans. J. 87 (1988) 64.
M. KOISHI and M. TSUNODA, Nikkan Kogyo Shimbun, Ltd. (1978) p. 59.
J. KOBAYASHI, “Takouseiseramikusu-no-kaihatu-ouyou” (CMC, Tokyo, 1985) p. 22 (in Japanese).
D. S. ADCOCK and I. C. MCDOWALL, J. Amer. Ceram. Soc. 40 (1957) 355.
S. R. HIND, Trans. Ceram. Soc. 22 (1923) 90.
J. G. WOODWARD, Am. Ceram. Soc. Bull. 31 (1952) 389.
H. B. MATZEN and C. E. PARMELEE, J. Amer. Ceram. Soc. 13 (1930) 856.
H. SUZUKI, S. TAKAGI, H. MORIMITSU and S. HIRANO, J. Ceram. Soc. Japan 100 (1992) 272.
K. OSHIMA, K. ODA and S. SHIBASAKI, ibid. 100 (1993) 1032.
G. A. LOOMIS, J. Amer. Ceram. Soc. 23 (1940) 159.
M. I. NIETO, R. MORENO, A. SALOMONI and I. STAMENKOVIC, Am. Ceram. Soc. Bull. 77 (1998) 62.
Y. HOTTA, T. BANNO, S. SANO, A. TSUZUKI and K. ODA, J. Ceram. Soc. Japan 108 (2000) 1030. Received 10 December 1999 and accepted 31 May 2001 423
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hotta, Y., Banno, T. & Oda, K. Physical properties of slip casting of high pure Al2O3 slurry using porous Al2O3-glass mold. Journal of Materials Science 37, 417–423 (2002). https://doi.org/10.1023/A:1013637320847
Issue Date:
DOI: https://doi.org/10.1023/A:1013637320847