Abstract
Titanium nitride (TiN) has been applied as decorative coating due to its high reflectivity and goldish color, having high hardness and wear resistance. In the present work, TiNx films were deposited by grid-assisted magnetron sputtering. The color and reflectivity were investigated by spectrophotometry as a function of the working gas ratio N2/Ar used during films deposition. The crystalline phases were identified by X-ray diffraction pattern (XRD). The TiNx plasma frequency (ω p) and the relaxation time (τ) were determined by fitting the experimental reflectivity curves, according to the Drude model. The color parameters obtained by the CieLab method were used to compare TiNx films with gold film.
Similar content being viewed by others
References
Y. Jyachandran, S. Narayandass, D. Mangalaraj, S. Areva, J. Mielczarski, Properties of titanium nitride films prepared by direct current magnetron sputtering. Mater Sci Eng A445-446, 223–236 (2007)
L.A. Rocha et al., Structural and corrosion behavior of stoichiometric and substoichiometric TiN thin films. Surf Coat 180–181, 158–163 (2004)
Q. Luo, S. Yang, K.E. Cook, Hybrid hipims and DC magnetron sputtering of TiN coatings: deposition rate, structure and tribological properties. Surf Coat Technol 236, 13–21 (2013)
T.-S. Yeh, W. Jenn-Ming, H. Long-Jang, The properties of TiN thin films deposited b pulsed direct current magnetron sputtering. Thin Solid Films 516, 7294–7298 (2008)
A. Kumar, D. Kaur, Nanoindentation and corrosion studies of TiN/NiTi thin films for biomedical applications. Surf Coat Technol 204, 1132–1136 (2009)
M. Wittmer, H. Melchior, Applications of TiN thin films in silicon device technology. Thin Solid Films 93, 397–405 (1982)
M. Nose, M. Zhoub, E. Honboc, M. Yokotaa, S. Saji, Colorimetric properties of ZrN and TiN coatings prepared by DC reactive sputtering. Surf Coat Technol 142 a 144, 211–217 (2001)
S. Niyomsoan, Variation of color in titanium and zirconium nitride decorative thin films. Thin Solid Films 415, 187–194 (2002)
A. Lousa, J. Esteve, J. Mejia, A. Devia, Influence of deposition pressure on the structural mechanical and decorative properties of TiN thin films deposited by cathodic arc evaporation. Vacuum 81, 1507–1510 (2007)
F. Vaz, P. Machado, L. Rebouta, J. Mendes, S. Lancer oz-Mendez, L. Cunha, S. Nascimento, P. Goudeau, J. Riviere, E. Alves, A. Sidor, Physical and morphological characterization of rectively magnetron sputtered TiN films. Thin Solid Films 420, 421–428 (2002)
H. Durusoy, O. Duyar, A. Ayndilli, F. Ay, Influence of substrate temperature and bias voltage and the optical transmittance of TiN films. Vacuum 70, 21–28 (2003)
G. Reiners, U. Beck, H. Jehn, Decorative optical coatings. Thin Solids Films 253, 33–40 (1994)
A. Delin, Optical properties of the group-IVB refractory metal compounds. Physical Review B 54(3), 1673–1681 (1996)
B. Dominique e, T. Grosges, “Fitting the optical constantes of gold, silver, Chromium, titanium and adluminius in the visible bandwidht,” Journal of Nanophotonics, pp. 083097-1 - 083097-16, 07 (2014)
A. Perry, M. Georgson, W.D. Sproul, Variations in the reflectance of TiN, ZrN And HfN. Thin Solid Films 157, 255–265 (1988)
P. Panjan, Optical properties of nitride coatings deposited at low substrate temperatures. Vacuum 40(1/2), 161–164 (1990)
B. karlsson, R.P. Shimshock, B.O. Seraphin, Optical properties of CVD-Coated TiN, ZrN and HfN. Solar Energy Materials 7, 401–411 (1983)
A. Sadao, M. Takahashi, Optical properties of TiN films deposited by direct current reactive. Journal of Applied Physics 87(1), 1264–1269 (2000)
M.E.A. Kadi, Analysis of optical and related properties of thin oxide films determined by Drude-Lorentz model. Surf Coat Technol 211, 45–49 (2012)
Gernot Hoffmann, “Cielab Color Space”, accessed april 1, 2012, http://docs-hoffmann.de/cielab03022003.pdf
L.C. Fontana, J.L.R. Muzart, Triode magnetron sputtering TiN film deposition. Surf Coat Technol 114(21), 7–12 (1999)
L.C. Fontana, J.L.R. Muzart, Characteristics of triode magnetron sputtering: the morphology of deposited titanium films. Surf Coat Technol 107, 24–30 (1998)
J. Je, D. Noh, H. Kim, K. Liang, Preferred orientation of TiN films studied by a real time synchrotron x-ray scattering. J Appl Phys 81, 6126 (1997)
A. Kuzmenko, RefFIT - Software, Geneva, accessed may 1, 2014, http://optics.unige.ch/alexey/reffit.html (2014)
M. Stromme, R. Karmhag, C. Ribbing, Optical constants of sputtered hafnium nitride films. Intra e interband contributions. Opt Mater 4, 629–639 (1995)
Acknowledgments
This project was sponsored by CAPES Brazil.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Alves, L.A., Sagás, J.C., Damião, A.J. et al. Drude’s Model Optical Parameters and the Color of TiNx Films Obtained Through Reflectivity Measurements. Braz J Phys 45, 59–63 (2015). https://doi.org/10.1007/s13538-014-0294-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13538-014-0294-7