Abstract
To simulate the hydroplaning of a tire, many analytical studies have been performed using commercial explicit FE (Finite Element) codes such as MSC.DYTRAN and LS-DYNA. However, most previous studies on this subject have addressed simulation of hydroplaning for water more than 5 mm deep. Additionally, because a great number of Eulerian elements and Lagrangian elements are typically used to analyze hydroplaning and because multiple analyses should be performed for various water depths, long CPU times are required. In this study, it was found that the traction force and the lift and drag forces between the tire and the road surface could be easily estimated for water shallower than 5 mm using an exponential function based on tire rolling FE simulation results. Furthermore, changes in skid resistance, expressed as SN (skid number), could be estimated for various water depths and vehicle speeds using the method proposed in this study, and the results were proven to be in good agreement with results obtained using the ASTM E274 Pavement Friction Tester.
Similar content being viewed by others
Abbreviations
- a, b, c:
-
constants in the extrapolated solution
- h :
-
water depth
- v :
-
vehicle speed
- F x :
-
horizontal resistance force
- F z :
-
vertical load
- SN :
-
skid number
References
Anderson, D. A., Huebner, R. S., Reed, J. R., Warner, J. C. and Henry, J. J. (1998). Improved Surface Drainage of Pavements: Final Report. NCHRP Web Document 16, Pennsylvania Transportation Institute, Pennsylvania State University.
ASTM (American Society for Testing and Material) (2008a). ASTM Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests E501-08.
ASTM (American Society for Testing and Material) (2008b). ASTM Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire. E274-97.
Browne, A. L. (1975). Tire deformation during dynamic hydroplaning. Tire Science and Technology TSTCA 3,1, 16–28.
Delanne, Y. (2005).Skid Resistance of Tires: Conventional Skid Resistance, Comparison and Correlation with Texture. Bulletin Des Laboratories Des Point et Chaussees, 225, French Public Works Research Laboratory, Paris, France.
Eshel, A. (1967). A Study of Tires on a Wet Runway. Ampex Corp. 67–24.
Grogger, H. and Weiss, M. (1996). Calculation of the three dimensional free surface flow around an automobile tire. Tire Science and Technology TSTCA 24,1, 39–49.
Huebner, R. S., Reed, J. R. and Henry, J. J. (1986) Criteria for predicting hydroplaning potential. J. Transportation Engineering 112,5, 549–553.
Harwood, D. W. (2003). Review of Truck Characteristics as Factors in Roadway Design. Transportation Research Board of the National Academies, 46.
Horn, W. B. and Dreher, R. C. (1963). Phenomena of Pneumatic Tire Hydroplaning. NASA TN D-2056. NASA. USA.
Huebner, R. S., Reed, J. R. and John, J. H. (1986). Criteria for predicting hydroplaning potential. J. Transportation Engineering 112,5, 549–553.
Koishi, M., Okano, T., Olovsson, L., Saito, H. and Makino, M. (2001). Hydroplaning simulation using fluid-structure interaction in LS-DYNA. The 3rd European LS-DYNA Users Conf.
Kim, T.-W. and Jeong, H.-Y. (2010). Hydroplaning simulations for tires using FEM, FVM and an asymptotic method. Int. J. Automotive Technology 11,6, 901–908.
Lee, S. Y., Yoo, I. K. and Kim, J. W. (2010). Evaluation of surface skid resistance by vehicle operation speed. Korean Society of Road Engineers, 277–282.
Martin, C. S. (1966). Hydrodynamics of Tire Hydroplaning, Final Report, Project B-608, Georgia Institute of Technology.
McLean, A. J., Anderson, R. W. G., Farmer, M. J. B., Lee, B. H. and Brooks, C. G. (1994). Vehicle Travel Speeds and the Incidence of Fatal Pedestrian Collisions. NHMRC Road Accident Research Unit, The University of Adelaide for the Federal Office of Road Safety, Australian Department of Transport, Canberra.
Nakajima, Y., Seta, E., Kamegawa, T. and Ogawa, H. (2000). Hydroplaning analysis by FEM and FVM: Effect of tire rolling and tire pattern on hydroplaning. Int. J. Automotive Technology 1,1, 26–34.
Ong, G. P. and Fwa, T. F. (2007). Prediction of Wet Pavement Skid Resistance and Hydroplaning Potential. Transportation Research Record: J. Transportation Research Record, 2005, TBR. National Research Council, 160–171.
Oh, C. W., Kim, T. W., Jeong, H. Y., Park, K. S. and Kim, S. N. (2008). Hydroplaning simulation for a straightgrooved tire by using FDM, FEM and an asymptotic method. J. Mechanical Science and Technology, 22, 34–40.
Ong, G. P. and Fwa, T. F. (2010). A Mechanistic Interpretation of Braking Distance Specifications and Pavement Friction Requirements. Transportation Research Board of the National Academies. 0361–1981.
Olovsson, L. and Souli, M. (2000). ALE and fluid-structure interaction capability in LS-DYNA. Proc. 6th Int. LSDYNA Users Conf.
Okano, T. and Koishi, M. (2001). A new computational procedure to predict transient hydroplaning performance of a tire. Tire Science and Technology TSTCA 29,1, 2–22.
Rezgui, J. A. and Estenne, V. (2001) Tire tread pattern analysis for ultimate performance of hydroplaning. Conf. Computational Fluid and Solid Mechanics, 264–267.
Rose, J. G. and Gallaway, B. M. (1977). Water depth influence on pavement friction. ASCE J. Transportation Engineering 103,4, 491–506.
Suzuki, T. and Fujikawa, T. (2001). Improvement of Hydroplaning Performance Based on Water Flow around Tires. Japan Automobile Research Institute.
Saal, R. N. J. (1936). Laboratory investigation into the slipperiness of roads. Chemistry and Industry, 55, 3–7.
Zmindak, M. and Grajciar, I. (1997). Simulation of the aquaplane problem. Computers & Structures 64,5/6, 1155–1164.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jeong, J.Y., Jeong, H.Y. Hydroplaning simulation of a tire in thin water using fem and an estimation method and its application to skid number estimation. Int.J Automot. Technol. 14, 325–331 (2013). https://doi.org/10.1007/s12239-013-0036-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-013-0036-9