Abstract
Harvesting energy stands alone as one of the most promising techniques for approaching the global energy problem due to population growth, industrialization, and depletion of natural resources and environmental concerns. Energy harvesting technology in civil engineering is a new research territory that encompasses technologies that capture, accumulate and store the energy wasted at pavements. Their most enticing characteristic is that they already offer extended paved surfaces. This paper describes the Thermoelectric Generator (TEG) concept that was proposed and implemented to exploit the natural temperature difference between the air and an infrastructure to harvest the natural heat available. The object of this paper was to evaluate the application possibility of TEG as a future source of electrical power using civil infrastructure based on four case studies. The proposed system was composed of a TEG, conductive material, acrylic pipe, mortar specimen, and magnifying glass to verify the implementation of energy harvesting on infrastructure. In the TEG, the ambient thermal gradient between the two surfaces of the thermoelectric module was converted into electrical energy. The experimental results verified the feasibility of the proposed concept and hence of the thermoelectric harvesting of ambient thermal energy using solar heat in roadway.
Similar content being viewed by others
References
Ahiska, R. and Mamur, H. (2014). “A review: Thermoelectric generators in renewable energy.” International Journal of Renewable Energy Research, Vol. 4, No. 1.
Baranowski, L. L., Snyder, G. J., and Toberer, E. S. (2013). “Effective thermal conductivity in thermoelectric materials.” Journal of Applied Physics, Vol. 113.
Davidson, J. and Mo, C. (2014). “Recent advances in energy harvesting technologies for structure health monitoring applications.” Smart Materials Research, Vol. 2014.
Hsu, C.-T., Huang, G.-Y.., Chu, H.-S.., Yu, B., and Yao, D.-J. (2011). “Experiments and simulations on low-temperature waste heat harvesting system by thermoelectric power generators.” Applied Energy, Vol. 88, pp. 1291–1297.
Jang, Shinae, Jo, Hongki., Cho, Soojun., Mechitov, Kirill., Rice, Jennifer A., Sim, S.-H., Jung, H.-J., Yun, C.-B., Spencer, Billie F., and Agha, Gul. (2010). “Structure health monitoring of a cable-stayed bridge using smart sensor technology: Deployment and evaluation.” Smart Structure and System, Vol. 6, Nos. 5-6, pp. 439–459.
Jarman, Jarman T., Khalil, Essam E., and Khalaf, E. (2013). “Energy analyses of thermoelectric renewable energy sources.” Open Journal of Energy Efficiency, Vol. 2, pp. 143–153, DOI: 10.4236/ojee.2013.24019.
Meydbray, Y., Singh, R., Nguyen, T., Christofferson, J., and Shakouri, A. (2004). “Feasibility study of thermoelectric power generation for stand alone outdoor applications.” 23rd International Conference on Thermoelectrics, Adelaide, Australia.
Meydbray, Y., Singh, R., and Shakouri, A. (2005). Thermoelectric Module Construction for Low Temperature Gradient Power Generation, 2005 International Conference on Thermoelectrics.
Mo, C. and Davidson, J. (2013). Energy harvesting technologies for structure health monitoring applications, 1st IEEE Conference on Technologies for Sustainability.
Ogbonnaya, E., and Weiss, L. (2012). Micro solar thermal thermal power harvesting using thermoelectric generator, National Society of Black Engineers Proceedings of 38th Annual Convention, Pittsburgh, PA, pp. 88–95.
Roundy, S. J. (2003). Energy scavenging for wireless sensor nodes with a focus on vibration to electricity conversion [Ph.D. dissertation], Department of Mechanical Engineering, University of California, Berkeley, California, USA.
Rowe, D. M. (2005). “General Principles and Basic Considerations. In: Rowe, D.M, editor.” Thermoelectric handbook from macro to nano. (pp. 1.4–1.14). e-book: CRC Press.
Stevens, J. (2001). “Optimal design of small Delta-T thermoelectric generation systems.” Energy Conversion and Management, Vol. 42, pp. 709–720.
Wang, W., Cionca, V., Wang, N., Hayes, M., O’Flynn, B., and O’Mathuna, C. (2013). “Thermoelectric Energy Harvesting for Building Energy Management Wireless Sensor Networks.” International Journal of Distributed Sensor Networks, Vol. 2013.
Yildiz, F. (2009). “Potential ambient energy-harvesting sources and techniques.” The Journal of Technology Studies, Vol. 35, No. 5, pp. 40–48.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, J., Lim, C., Lim, J. et al. Application of solar thermoelectric generation system for health monitoring system of civil infrastructures. KSCE J Civ Eng 22, 110–116 (2018). https://doi.org/10.1007/s12205-017-0945-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-017-0945-7