Abstracts
An alicyclic epoxy resin was modified with a copolymer having both a perfluoroalkyl side chain and a cyclohexenoxide-terminated side chain. The copolymer had a good solubility in the epoxy matrix during the reaction of the alicyclic epoxy groups on the terminal end of the side chains. Thus, the cured epoxy resin had a homogeneous phase structure and was a colorless material with excellent transparency. The fluorinated side chains were highly self-segregated in the air-side surface (thickness: less than 8 nm) to minimize the interfacial free energy between the air and cured epoxy resin. The surface of the epoxy coatings had a significantly low surface free energy (ca. 20 mJ/m2) and revealed both high hydro- and oleo-phobicities. In addition, the surface had a gradient in the refractive index due to the self-stratification of the C–F bond that has a low polarizability.
Similar content being viewed by others
References
Takai, H, “Kanshikishibouzoku Epokisi Jushi (Cycloaliphatic Epoxy Resin).” In: Sosetsu Epokishi Jushi (General Reviews of Epoxy Resins), Vol. 1, Basic Edition, pp. 76–84, The Japan Society of Epoxy Resin Technology, Tokyo, 2003
Ming, W, Laven, J, van der Linde, R, “Synthesis and Surface Properties of Film Based on Solventless Liquid Fluorinated Oligoester.” Macromolecules, 33 6886–6891 (2000)
Tsibouklis, J, Graham, P, Eaton, PP, Smith, JR, Nevell, TG, Smart, JD, Ewen, RJ, “Poly(perfluoroalkyl methacrylate) Film Structures: Surface Organization Phenomena, Surface Energy Determinations, and Force of Adhesion Measurements.” Macromolecules, 33 8460–8465 (2000)
Honda, K, Morita, M, Otsula, H, Takahara, A, “Molecular Aggregation Structure and Surface Properties of Poly(fluoroalkyl acrylate) Thin Films.” Macromolecules, 38 5699–5705 (2005)
Honda, K, Morita, M, Takahara, A, “Surface Molecular Aggregation Structure and Surface Properties of Poly(fluoroalkyl acrylate) Thin Films.” Kobunshi Ronbunshu, 64 181–190 (2007)
Morita, M, Ishikawa, T, Yamashita, T, Kanemura, T, Yamamoto, I, “Lyophobic and Development Properties of Fluorine Lyophobic Resist.” Kobunshi Ronbunshu, 66 102–110 (2009)
Tanaka, K, Kawaguchi, D, Yokoe, Y, Kajiyama, T, Takahara, A, Tasaki, S, “Surface Segregation of Chain Ends in α,ω-Fluoroalkyl-Terminated Polystyrenes Films.” Polymer, 44 4171–4177 (2003)
Jannasch, P, “Surface Structure and Dynamics of Block and Graft Copolymers Having Fluorinated Poly(ethylene oxide) Chain Ends.” Macromolecules, 31 1341–1347 (1998)
Wang, J, Mao, G, Ober, CK, Kramer, EJ, “Liquid Crystalline, Semifluorinated Side Group Block Copolymers with Stable Low Energy Surfaces: Synthesis, Liquid Crystalline Structure, and Critical Surface Tension.” Macromolecules, 30 1906–1914 (1997)
Van Ravenstein, L, Ming, W, van de Grampel, RD, van der Linde, R, de With, G, Loontjens, T, Thune, PC, Niemantsverdriet, JW, “Low Surface Energy Polymeric Films Form Novel Fluorinated Blocked Isocyanates.” Macromolecules, 37 408–413 (2004)
Ming, W, Melis, F, van de Grampel, RD, van Ravenstein, L, Tian, M, van der Linde, R, “Low Surface Energy Films Based on Partially Fluorinated Isocyanates: The Effects of Curing Temperature.” Prog. Org. Coat., 48 316–321 (2003)
Kasemura, T, Oshibe, Y, Uozumi, H, Kawai, S, Yamada, Y, Ohmura, H, Yamamoto, T, “Surface Modification of Epoxy Resin with Fluorine-Containing Methacrylic Ester Copolymers.” J. Appl. Polym. Sci., 47 2207–2216 (1993)
Matuszczak, S, Feast, WJ, “An Approach to Fluorinated Surface Coatings via Photoinitiated Cationic Cross-linking of Mixed Epoxy and Fluoroepoxy Systems.” J. Fluor. Chem., 102 269–277 (2000)
Van de Grampel, RD, Ming, W, van Gennip, WJH, van der Velden, F, Laven, J, Niemantsverdriet, JW, van der Linde, R, “Thermally Cured Low Surface-Tension Epoxyfilms.” Polymer, 46 10531–10537 (2005)
Wang, C, Zuo, Y, “Improvement of Surface and Moisture Resistance of Epoxy Resins with Fluorinated Glycidyl Ether.” J. Appl. Polym. Sci., 114 2528–2532 (2009)
Montefusco, F, Bongiovanni, R, Sangermano, M, Priola, A, Harden, A, Rehnberg, N, “New Difunctional Fluoro-epoxide Monomers: Synthesis, Photopolymerization and Characterization.” Polymer, 45 4663–4668 (2004)
Schnurer, AU, Holcomb, NR, Gard, GL, Castner, DG, Grainger, DW, “Photopolymerized Epoxide Copolymer Thin Films with Surfaces Highly Enriched with Sulfonyl Fluoride Groups.” Chem. Mater., 8 1475–1481 (1996)
Sangermano, M, Bongiovanni, R, Malucelli, G, Priola, A, Pollicino, A, Recca, A, J. Appl. Polym. Sci., 89 1524–1529 (2003)
Maruno, T, Nakamra, K, Murata, N, “Synthesis and Properties of a Novel Fluorine-Containing Alicyclic Diepoxide.” Macromolecules, 29 2006–2010 (1996)
Morita, H, Tanaka, K, Kajiyama, T, Nishi, T, Doi, M, “Study of the Glass Transition Temperature of Polymer Surface by Coarse-Grained Molecular Dynamics Simulation.” Macromolecules, 39 6233–6237 (2006)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ochi, M., Ichikawa, N., Shiota, R. et al. Surface properties of alicyclic epoxy coatings modified with reactive copolymer containing fluorinated side chains. J Coat Technol Res 11, 913–921 (2014). https://doi.org/10.1007/s11998-014-9604-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11998-014-9604-9