Skip to main content
Log in

Synthesis of antistatic hybrid nanocomposite coatings using surface modified indium tin oxide (ITO) nanoparticles

  • Published:
Journal of Coatings Technology and Research Aims and scope Submit manuscript

Abstract

Several antistatic nanocomposite hybrid coatings based on epoxy-silane developed by sol–gel method are studied. The hybrid sols are prepared by hydrolysis and condensation of GPTMS and TMOS precursors in the presence of an acid, as catalyst, and EDA as curing agent. Considering their good electrical conductivity, indium tin oxide (ITO) nanoparticles are used as antistatic agents. To improve the distribution/dispersion of ITO nanoparticles in the polymer matrix, the surface of nanoparticles is modified with silane groups (m-ITO). The antistatic properties of the coatings, containing various amounts of m-ITO nanoparticles, are investigated through surface electrical resistivity measurements. FTIR is used to screen the reaction of epoxy groups and the effect of EDA on crosslinking in the hybrid coatings. Morphology, nanoparticle distribution and surface roughness of the coatings are studied through SEM and AFM microscopy techniques. Also, homogeneous distribution of ITO nanoparticles within the polymer matrix is confirmed by EDXA elemental mapping. The cubic shape and nanometric size of the nanoparticles in the hybrid coatings are monitored by transmission electron microscopy (TEM).

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. Brun, G, Innocenzi, P, Guglielmi, M, Babonneau, F, “Basic Catalyzed Synthesis of Hybrid Sol–Gel Materials Based on 3-Glycidoxypropyltrimethoxysilane.” J Sol-Gel Sci. Technol., 26 303–306 (2003)

    Article  Google Scholar 

  2. Winkler, R-P, Arpac, E, Schirra, H, Sepeur, S, Wegner, I, Schmidt, H, “Aqueous Wet Coatings for Transparent Plastic Glazing.” Thin Solid Films, 351 20–211 (1999)

    Article  Google Scholar 

  3. Haas, K-H, Amberg-Schwab, S, Rose, K, “Functionalized Coating Materials Based on Inorganic–Organic Polymers.” Thin Solid Films, 351 198–203 (1999)

    Article  Google Scholar 

  4. Khramov, A, Balbyshev, V, Voevodin, N, Donley, M, “Nanostructured Sol–Gel Derived Conversion Coatings Based on Epoxy- and Amino-Silanes.” Prog. Org. Coat., 47 207–213 (2003)

    Article  Google Scholar 

  5. Senthilkumar, V, Senthil, K, “Vickraman P.“Microstructural, Electrical and Optical Properties of Indium Tin Oxide (ITO) Nanoparticles Synthesized by Co-precipitation Method.” Mater. Res. Bull., 47 1051–1056 (2012)

    Article  Google Scholar 

  6. Houng, B, “Tin Doped Indium Oxide Transparent Conducting Thin Films Containing Silver Nanoparticles by Sol–Gel Technique.” Appl.Phys. Lett., 87 251922–251923 (2005)

    Article  Google Scholar 

  7. Wolf, N, Rydzek, M, Gerstenlauer, D, Arduini-Schuster, M, Manara, J, “Low Temperature Processing of Redispersed Tin Doped Indium Oxide Nanoparticle Coatings.” Thin Solid Films, 532 60–65 (2013)

    Article  Google Scholar 

  8. Zand, RZ, Langroudi, AE, Rahimi, A, “Synthesis and Characterization of Nanocomposite Hybrid Coatings Based on 3-Glycidoxypropyl-trimethoxysilane and Bisphenol A.” Iran Polym. J., 14 371–377 (2005)

    Google Scholar 

  9. Shanaghi, A, Sabour, A, Shahrabi, T, Aliofkhazraee, M, “Corrosion Protection of Mild Steel by Applying TiO2 Nanoparticle Coating via Sol–GelMethod.” Prot. Met. Chem. S, 45 305–311 (2009)

    Article  Google Scholar 

  10. Rivero, PJ, Urrutia, A, Goicoechea, J, Zamarreño, CR, Arregui, FJ, Matías, IR, “An Antibacterial Coating Based on a Polymer/Sol–Gel Hybrid Matrix Loaded with Silver Nanoparticles.” Nanoscale Res. Lett., 6 (305) 1–7 (2011)

    Google Scholar 

  11. Elmas, S, Korkmaz, Ş, Pat, S, “Optical Characterization of Deposited ITO Thin Films on Glass and Pet Substrates.” Appl. Surf. Sci., 276 641–664 (2013)

    Article  Google Scholar 

  12. Hotovy, J, Hüpkes, J, Böttler, W, Marins, E, Spiess, L, Kups, T, Smirnov, V, Hotovy, I, Kováč, J, “Sputtered ITO for Application in Thin-Film Silicon Solar Cells: Relationship Between Structural and Electrical Properties.” Appl. Surf. Sci., 269 81–87 (2013)

    Article  Google Scholar 

  13. Seki, Y, Sawada, Y, Wang, M, Lei, H, Hoshi, Y, Uchida, T, “Electrical Properties of Tin-Doped Indium Oxide Thin Films Prepared by a Dip Coating.” Ceram. Int., 38 613–616 (2012)

    Article  Google Scholar 

  14. Sytchkova, A, Zola, D, Bailey, L, Mackenzie, B, Proudfoot, G, Tian, M, Ulyashin, A, “Depth Dependent Properties of ITO Thin Films Grown by Pulsed DC Sputtering.” Mater. Sci. Eng.: B, 178 586–592 (2013)

    Article  Google Scholar 

  15. Ding, X, Yan, J, Li, T, Zhang, L, “Transparent Conductive ITO/Cu/ITO Films Prepared on Flexible Substrates at Room Temperature.” Appl. Surf. Sci., 258 3082–3085 (2012)

    Article  Google Scholar 

  16. Popović, J, Gržeta, B, Tkalčec, E, Tonejc, A, Bijelić, M, Goebbert, C, “Effect of Tin Level on Particle Size and Strain in Nanocrystalline Tin-Doped Indium Oxide (ITO).” Mater. Sci. Eng.: B, 176 93–98 (2011)

    Article  Google Scholar 

  17. Chao, Y, Tang, W, Wang, X, “Properties of Resistivity, Reflection and Absorption Related to Structure of ITO Films.” J. Mater. Sci. Technol., 28 325–328 (2012)

    Article  Google Scholar 

  18. Yakuphanoglu, F, “Electrical Conductivity, Seebeck Coefficient and Optical Properties of SnO2 Film Deposited on ITO by Dip Coating.” J. Alloy Compd, 470 55–59 (2009)

    Article  Google Scholar 

  19. Psuja, P, Hreniak, D, Strek, W, “The Influence of Sintering Temperature and Sn4+ Concentration on Electrical and Optical Properties of ITO Nanocrystallites.” J. Phys. Conf. Ser., 146 1–8 (2009)

    Google Scholar 

  20. Lippens, P, Büchel, M, Chiu, D, Szepesi, C, “Indium–Tin-Oxide Coatings for Applications in Photovoltaics and Displays Deposited Using Rotary Ceramic Targets: Recent Insights Regarding Process Stability and Doping Level.” Thin Solid Films, 532 94–97 (2013)

    Article  Google Scholar 

  21. Kim, S-S, Choi, S-Y, Park, C-G, Jin, H-W, “Transparent Conductive ITO Thin Films Through the Sol–Gel Process Using Metal Salts.” Thin Solid Films, 347 155–160 (1999)

    Article  Google Scholar 

  22. Xu, B-Q, Feng, R-K, Yang, B, Deng, Y, Nonferr, T, “Effect of Sn4+ Content on Properties of Indium Tin Oxide Nanopowders.” Metal. Soc., 20 643–648 (2010)

    Google Scholar 

  23. Guenther, G, Schierning, G, Theissmann, R, Kruk, R, Schmechel, R, Baehtz, C, Prodi-Schwab, A, “Formation of Metallic Indium-Tin Phase from Indium-Tin-Oxide Nanoparticles Under Reducing Conditions and Its Influence on the Electrical Properties.” J. Appl. Phys., 104 034501–034510 (2008)

    Article  Google Scholar 

  24. Kim, J-W, Choi, J, Hong, S-J, Han, J-I, Kim, Y-S, “Effects of the Concentration of Indium-Tin-Oxide (ITO) Ink on the Characteristics of Directly-Printed ITO Thin Films.” J. Korean Phys. S., 57 1794–1798 (2010)

    Article  Google Scholar 

  25. Königer, T, Münstedt, H, “Coatings of Indium Tin Oxide Nanoparticles on Various Flexible Polymer Substrates: Influence of Surface Topography and Oscillatory Bending on Electrical Properties.” J. Soc. Int .Display, 16 559–568 (2008)

    Article  Google Scholar 

  26. Farhadyar, N, Rahimi, A, Langroudi, AE, “Preparation and Characterization of Aromatic Amine Cured Epoxy-Silica Hybrid Inorganic–Organic Coating via in Situ Sol–Gel Process.” Iran Polym. J., 14 155–162 (2005)

    Google Scholar 

  27. Yang, Y, Zhou, Y, Ge, J, Yang, X, “Optically Active Polyurethane@ Indium Tin Oxide Nanocomposite: Preparation, Characterization and Study of Infrared Emissivity.” Mat. Res. Bull., 47 2264–2269 (2012)

    Article  Google Scholar 

  28. Cho, Y-S, Yi, G-R, Hong, J-J, Jang, SH, Yang, S-M, “Colloidal Indium Tin Oxide Nanoparticles for Transparent and Conductive Films.” Thin Solid Films, 515 1864–1871 (2006)

    Article  Google Scholar 

  29. Liu, J, Wu, D, Zeng, S, “Influence of Temperature and Layers on the Characterization of ITO Films.” J. Mater. Process Technol., 209 3943–3948 (2009)

    Article  Google Scholar 

  30. Boston D.R., “Silver Halide Coated Organic Polymeric Films Utilizing Chitosan Acid Salt Antistatic Protection Layers,” US Patent No.: 5,457,015

  31. Jeong, M-Y, Ahn, B-Y, Lee, S-K, Lee, W-K, Jo, N-J, “Antistatic Coating Material Consisting of Poly(butylacrylate-co-styrene) Core–Nickel Shell Particle.” T. Nonferr. Metal. Soc., 19 s119–s123 (2009)

    Article  Google Scholar 

  32. Yu, D, Yu, W, Wang, D, Qian, Y, “Structural, Optical, and Electrical Properties of Indium Tin Oxide Films with Corundum Structure Fabricated by a Sol–Gel Route Based on Solvothermal Reactions.” Thin Solid Films, 419 166–172 (2002)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Azam Rahimi.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Jafari, M., Rahimi, A., Shokrolahi, P. et al. Synthesis of antistatic hybrid nanocomposite coatings using surface modified indium tin oxide (ITO) nanoparticles. J Coat Technol Res 11, 587–593 (2014). https://doi.org/10.1007/s11998-013-9555-6

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11998-013-9555-6

Keywords

Navigation