Abstract
In this article, the mathematical model of vanadium carbide growth was established on the basis of principles of physical chemistry. Based on the results of the experimental work and literature data, the assumption that the speed of the process is proportional to the thermodynamic activity of carbon in the austenite has been proven. An analysis of the relationship between the thickness of the vanadium carbide layer and the salt bath temperature, immersion time, and chemical composition of the substrate was conducted. A comparison of the model-calculated values and the results obtained by the experiment indicates that the model has been properly founded.
Similar content being viewed by others
References
H. Fujita and T. Arai, Proc. 4th Int. Congress of IFHT (Berlin, Germany, 3–7 June 1985), pp. 1109–1124.
S.B. Fazluddin, A. Koursaris. C. Ringas, and K. Cowie, Miner. Met. Mater. Soc. 45 (1993).
T. Arai and N. Komatsu, Proceedings of the 18th International Machine Tool Design and Research Conference, London, U.K., Sept. 14–16, 1977, p. 225.
T. Arai and H.M. Glaser, Proc. Conf. Manufacturing Strategies, vol. 6 (Cleveland, OH: Precision Metalforming Association, 1996), p. 549.
M. Stupnišek and B. Štefotič, Proceedings of YUSTOM ’86, Plitvička jezera, May 20–23, 1986, pp. 323–330.
B. Štefotič, J. Vižintin, F. Grobelšek, and M. Stupnišek, Proceedings “Tribologija v teoriji in praksi”, Ljubljana, 1996, pp. 233–241.
H.L. Liu, J.C. Zhu, Y. Liu, and Z.H. Lai, Mater. Lett. 62, 3084 (2008).
J.H. Ma, M.N. Wu, Y.H. Du, S.Q. Chen, J. Ye, and L.L. Jin, Mater. Lett. 63, 905 (2009).
Y.H. Chen, K.W. Lee, W.A. Chiou, Y.W. Chung, and L.M. Keer, Surf. Coat. Technol. 146–147, 209 (2001).
C.K.N. Oliveira, C.L. Benassi, and L.C. Casteletti, Surf. Coat. Technol. 201, 1880 (2006).
T. Arai and S. Moriyana, Thin Solid Films 249, 54 (1994).
S. Sen, Vacuum 79, 63 (2005).
F.S. Chen and K.L. Wang, Surf. Coat. Technol. 115, 239 (1999).
M. Aghaie-Khafri and F. Fazlalipour, Surf. Coat. Technol. 202, 4107 (2008).
X.J. Liu, H.C. Wang, D.W. Li, and Y.X. Wu, Surf. Coat. Technol. 201, 2414 (2006).
B. Matijević and M. Stupnišek, Surf. Eng. 23, 1 (2007).
M. Aghaie-Khafri, F. Fazlalipour, and J. Phys, Chem. Solids 69, 2465 (2008).
T. Arai, J. Heat. Treat. 1, 15 (1979).
X.G. Lu, M. Selleby, and B. Sundman, Acta Mater. 55, 1215 (2007).
V.N. Lipatnikov, W. Lengauer, P. Ettmayer, E. Keil, G. Groboth, and E. Kny, J. Alloys Compd. 261, 192 (1997).
U. Sen, Mater. Chem. Phys. 86, 189 (2004).
B. Matijević and M. Stupnišek, Mater. Tehnol. 34, 237 (2000).
A. Bendavid, P.J. Martin, T.J. Kinder, and E.W. Preston, Surf. Coat. Technol. 163–164, 347 (2003).
U. Sen, Vacuum 75, 339 (2004).
M. Aghaie-Khafri and F. Fazlalipour, J. Phys. Chem. Solids 69, 2465 (2008).
X.S. Fan, Z.G. Yang, C. Zhang, Y.D. Zhang, and H.Q. Che, Surf. Coat. Tehnol. 205, 641 (2010).
B. Chicco, W.E. Borbidge, and E. Summerville, Mater. Sci. Eng. A 266, 62 (1999).
G.A. Roberts, J.C. Hamaker, and A.R. Johnson, Tool Steels (Materials Park: ASM, 1961).
M. Stupnišek, B. Koroušić, and B. Dobovišek, Proc. 3rd Int. Congress of IFHT, vol. 7, Shanghai, Nov. 7–11, 1983, pp. 23–28.
B. Koroušić, Rudarsko-Metalurški Zbornik 40, 5 (1989).
F. Neuman and B. Person, Härterei-Technische Mitteilungen 23, 296 (1966).
S. Gunnarson, Härterei-Technische Mitteilungen 22, 293 (1967).
W.G. Cohran and G.M. Cox, Experimental Designs (New York, NY: Wiley, 1957).
B. Matijević (Ph.D. Dissertation, University of Zagreb, Zagreb, Croatia, 1997).
L. Xiujuan, W. Huachang, L. Dongwei, and W. Yanxi, Surf. Coat. Tehnol. 201, 2414 (2006).
Acknowledgements
The author would like to thank to the Ministry of Science, Education and Sports of the Republic of Croatia for the financial support of this research.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Matijević, B. A Model of Vanadium Carbide Growth on Steel Surfaces Obtained by Thermo Reactive Deposition. JOM 65, 1395–1402 (2013). https://doi.org/10.1007/s11837-013-0763-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-013-0763-4