Abstract
The processing of Al/TiO2 composite powders produced by high-energy mechanical milling leads to production of a range of valuable, titanium-based materials. They include Ti(Al,O)/Al2O3 and TixAly(O)/Al2O3 composite powders, bulk composites and Ti3Al/TiAl alloy powders, and corresponding bulk materials. The strength of the Ti(Al,O)/Al2O3 and TixAly(O)/Al2O3 composites is moderate, but their high-temperature oxidation resistance is exceptionally high, making the titanium-based composite powders favorable feedstock materials for protective coatings. The hardness of the Ti(Al,O)/Al2O3 and Ti3Al(O)/Al2O3 composites is also very high (10–16 GPa).
Similar content being viewed by others
References
L.L. Wang, Z.A. Munir, and Y.M. Maximov, J. Mater. Sci., 28 (1993), pp. 3693–3708.
N. Claussen, D.E. Garcia, and R. Jessen, J. Mater. Res., 11 (1996), pp. 219–224.
S. Schicker et al., J. Amer. Ceram. Soc., 80 (1997), p. 2294.
S. Schicker et al., Acta Mater., 46 (1998), pp. 2485–2492.
D.L. Zhang and M. Newby, U.S. patent US6,264,719 B1 (1999).
D.L. Zhang, D.Y. Ying, and G. Adam, Materials Science Forum, 386–388 (2002), pp. 287–292.
N.J. Welham, Intermetallics, 6 (1998), pp. 363–368.
Z.H. Cai (Ph.D. thesis, University of Waikato, New Zealand, 2003).
C. Suryanarayana, Prog. in Mater. Sci., 46 (2001), pp. 1–184.
B.S. Murty and S. Ranganathan, Int. Mater. Rev., 43 (1998), pp. 101–674.
D.Y. Ying, D.L. Zhang, and M. Newby, submitted to Met. Mater. Trans. A.
W. Gao, Z.W. Li, and D.L. Zhang, Oxidation of Metals, 57 (2001), pp. 99–114.
A. Menand, A. Huguet, and A. Nerac-Partaix, Acta Mater., 44 (1996), pp. 4729–4736.
Author information
Authors and Affiliations
Additional information
For more information, contact D.L. Zhang, University of Waikato, Waikato Centre for Advanced Materials, Department of Materials and Process Engineering, Private Bag 3105, Hamilton, New Zealand; 011-64-7-838-4783; fax 011-64-7-838-4835; e-mail d.zhang@waikato.ac.nz.
Rights and permissions
About this article
Cite this article
Zhang, D.L., Cai, Z.H. & Adam, G. The mechanical milling of Al/TiO2 composite powders. JOM 56, 53–56 (2004). https://doi.org/10.1007/s11837-004-0147-x
Issue Date:
DOI: https://doi.org/10.1007/s11837-004-0147-x