Abstract
In order to study rock breaking characteristics of tunnel boring machine (TBM) disc cutter at different rock temperatures, thermodynamic rock breaking mathematical model of TBM disc cutter was established on the basis of rock temperature change by using particle flow code theory and the influence law of interaction mechanism between disc cutter and rock was also numerically simulated. Furthermore, by using the linear cutting experiment platform, rock breaking process of TBM disc cutter at different rock temperatures was well verified by the experiments. Finally, rock breaking characteristics of TBM disc cutter were differentiated and analyzed from microscale perspective. The results indicate the follows. 1) When rock temperature increases, the mechanical properties of rock such as hardness, and strength, were greatly reduced, simultaneously the microcracks rapidly grow with the cracks number increasing, which leads to rock breaking load decreasing and improves rock breaking efficiency for TBM disc cutter. 2) The higher the rock temperature, the lower the rock internal stress. The stress distribution rules coincide with the Buzin Neske stress circle rules: the maximum stress value is below the cutting edge region and then gradually decreases radiant around; stress distribution is symmetrical and the total stress of rock becomes smaller. 3) The higher the rock temperature is, the more the numbers of micro, tensile and shear cracks produced are by rock as well as the easier the rock intrusion, along with shear failure mode mainly showing. 4) With rock temperature increasing, the resistance intrusive coefficients of rock and intrusion power decrease obviously, so the specific energy consumption that TBM disc cutter achieves leaping broken also decreases subsequently. 5) The acoustic emission frequency remarkably increases along with the temperature increasing, which improves the rock breaking efficiency.
Similar content being viewed by others
References
YUKINORI K. Present status and technology of shield tunneling method in Japan [J]. Tunneling and Underground Space Technology, 2003, 18(2): 145-159.
LU Y, MA J, XU Q, HAN M N. TBM in the future of China [J]. Marine Georesources and Geotechnology, 2004, 22(3): 185-193.
HUO J Z, SUN W, SU P C, DENG L Y. Optimal disc cutters plane layout design of the full-face rock tunnel boring machine (TBM) using an ant colony optimization algorithm [J]. Intelligent Robotics and Applications Lecture Notes in Computer Science, 2009, 5928: 443-452.
CHO J W, JEON S, YU S H, CHANG S H. Optimum spacing of TBM disc cutter: A numerical simulation using the three-dimensional dynamic fracturing method [J]. Tunneling and Underground Space Technology, 2010, 25(3): 230-244.
GERTSCHA R, GERTSCH L, ROSTAMI J. Disc cutting tests in colorado red granite: Implications for TBM performance prediction [J]. International Journal of Rock Mechanics £¦ Rock Mechanics, 2007, 44: 238-246.
WANG L, KANG Y, CAI Z, ZHANG Q, ZHAO Y, ZHAO H F. The energy method to predict disc cutter wear extent for hard rock TBMs [J]. Tunneling and Underground Space Technology, 2012, 28: 183-191.
WANG H, WU Y H, SUN H, WANG T Y, ZHAO K J. Characteristics analysis of TBM disc cutter ring [J]. Advanced Materials Research, 2010, 102/103/104: 219-222.
VANDER M I. The shift of the ¦Á-¦Â transition of association with the thermal expression granite at high pressure [J]. Tectonophsics, 1981, 73: 323-342.
ALM O, JAKTLUND L L. The influence of micro crack density on the elastic and fracture mechanical properties of Stripa granite [J]. Physics of the Earth and Planetary Interiors, 1985, 40: 17-61.
AL-SHAYEA N A, KHAN K, ABDULJAUWAD S N. Effects of confining pressure and temperature on mixed-mode (I-II) fracture toughness of a limestone rock [J]. International Journal of Rock Mechanics and Mining Sciences, 2000, 37(4): 629-643.
ODA M. Modern developments in rock structure characterization [J]. Comprehensive Rock Engineering, 1993, 1(1): 185-200.
NI J, CHEN Y L, WANG P, AZZAM R. Experimental study on mechanical properties of heated granite under different cooling ways [J]. Advanced Materials Research, 2013, 774/775/776: 1281-1286.
XU X L, GAO F. Experimental study on the strength and deformation quality of granite with effect of high temperature [J]. Advanced Materials Research, 2012, 226/227/228: 1275-1278.
GONG Neng-ping, CHEN Ming-fei F. Experimental study on dependence of toughness against dynamic fracture of rocks on temperature [J]. Journal of Anhui University of Science and Technology: Natural Science, 2013, 33(4): 1-3. ( in Chinese)
ZUO Jian-ping, XIE He-ping, LIU Yu-jie, HU B, LU J F. Investigation on fracture characteristics of sandstone after thermal effects through three-bending point experiments [J]. Chinese Journal of Solid Mechanics, 2010, 31(2): 119-126. ( in Chinese)
ZUO H Y, LUO Z Q, GUAN J L, WANG Y W. Identification on rock and soil parameters for vibration drilling rock in the metal mine based on the fuzzy least square support vector machine [J]. Journal of Central South University, 2014, 21(3): 1085-1090.
GONG Q M, ZHAO J, HEFNY A M. Numerical simulation of rock fragmentation process induced by two TBM cutters and cutter spacing optimization [J]. Tunnelling and Underground Space Technology, 2006, 21(12): 1-8.
POTYONDY D O, CUNDALL P A. A bonded-particle model for rock [J]. International Journal of Rock Mechanics and Mining Sciences, 2004, 41(8): 1329-1364.
Itasca. PFC user manual [M]. Minneapolis: Itasca Consulting Group Inc, 2002.
LIU H Y, KOU S Q, LINDQVIST P A. Numerical studies on bit-rock fragmentation mechanisms [J]. International Journal of Geomechanics, 2008, 8(1): 45-67.
NIE Si-jun. Discrete element method simulation and scratching experimental investigation on the pre-stress cutting of silicon carbide ceramics [D]. Xiangtan: Xiangtan University, 2009: 34-41. ( in Chinese)
XU Zi-jun. Numerical simulation and experimental study of rock breaking mechanism by shield machine cutters [D]. Changsha: Central South University, 2012: 43-46. (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Projects(51274252, 51074180) supported by the National Natural Science Foundation of China; Project(2013CB035401) supported by the National Basic Research Program of China; Projects(2012AA041801, 2012AA041803) supported by the High-Tech Research and Development Program of China
Rights and permissions
About this article
Cite this article
Tan, Q., Zhang, Gj., Xia, Ym. et al. Differentiation and analysis on rock breaking characteristics of TBM disc cutter at different rock temperatures. J. Cent. South Univ. 22, 4807–4818 (2015). https://doi.org/10.1007/s11771-015-3032-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-015-3032-6