Skip to main content
Log in

Corrosion resistance of Zn–Al layered double hydroxide/poly(lactic acid) composite coating on magnesium alloy AZ31

  • Research Article
  • Published:
Frontiers of Materials Science Aims and scope Submit manuscript

Abstract

A Zn–Al layered double hydroxide (ZnAl-LDH) coating consisted of uniform hexagonal nano-plates was firstly synthesized by co-precipitation and hydrothermal treatment on the AZ31 alloy, and then a poly(lactic acid) (PLA) coating was sealed on the top layer of the ZnAl-LDH coating using vacuum freeze-drying. The characteristics of the ZnAl-LDH/PLA composite coatings were investigated by means of XRD, SEM, FTIR and EDS. The corrosion resistance of the coatings was assessed by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results showed that the ZnAl-LDH coating contained a compact inner layer and a porous outer layer, and the PLA coating with a strong adhesion to the porous outer layer can prolong the service life of the ZnAl-LDH coating. The excellent corrosion resistance of this composite coating can be attributable to its barrier function, ion-exchange and self-healing ability.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Song G. Recent progress in corrosion and protection of magnesium alloys. Advanced Engineering Materials, 2005, 7(7): 563–586

    Article  Google Scholar 

  2. Song G, Atrens A. Understanding magnesium corrosion–a framework for improved alloy performance. Advanced Engineering Materials, 2003, 5(12): 837–858

    Article  Google Scholar 

  3. Zeng R C, Wang L, Zhang D F, et al. In vitro corrosion of Mg–6Zn–1Mn–4Sn–1.5Nd/0.5Y alloys. Frontiers of Materials Science, 2014, 8(3): 230–243

    Article  Google Scholar 

  4. Zeng R C, Qi WC, Song Y W, et al. In vitro degradation of MAO/PLA coating on Mg–1.21Li–1.12Ca–1.0Y alloy. Frontiers of Materials Science, 2014, 8(4): 343–353

    Article  Google Scholar 

  5. Wang Y M, Guo J W, Wu Y F, et al. Biocorrosion resistance of coated magnesium alloy by microarc oxidation in electrolyte containing zirconium and calcium salts. Frontiers of Materials Science, 2014, 8(3): 295–306

    Article  Google Scholar 

  6. Liang J, Zhang R H, Peng Z J, et al. One-step electrochemical fabrication of bilayered MgO/polymer coating on magnesium alloy. Frontiers of Materials Science, 2014, 8(3): 307–312

    Article  Google Scholar 

  7. Tian P, Liu X. Surface modification of biodegradable magnesium and its alloys for biomedical applications. Regenerative Biomaterials, 2015, 2(2): 135–151

    Article  Google Scholar 

  8. Zeng R-C, Sun X-X, Song Y-W, et al. Influence of solution temperature on corrosion resistance of Zn–Ca phosphate conversion coating on biomedical Mg–Li–Ca alloys. Transactions of Nonferrous Metals Society of China, 2013, 23(11): 3293–3299

    Article  Google Scholar 

  9. Chang L M, Liu W, Duan X Y, et al. Pulse plated Zn transition layer in electroplating Zn–Ni coatings on magnesium alloys. Surface Engineering, 2012, 28(10): 725–730

    Article  Google Scholar 

  10. Xu L, Yamamoto A. Characteristics and cytocompatibility of biodegradable polymer film on magnesium by spin coating. Colloids and Surfaces B: Biointerfaces, 2012, 93: 67–74

    Article  Google Scholar 

  11. Zheludkevich M L, Shchukin D G, Yasakau K A, et al. Anticorrosion coatings with self-healing effect based on nanocontainers impregnated with corrosion inhibitor. Chemistry of Materials, 2007, 19(3): 402–411

    Article  Google Scholar 

  12. Zheludkevich M. Self-healing anti-corrosion coatings. In: Ghosh S K, ed. Self-Healing Materials: Fundamentals, Design Strategies, and Applications. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2009, 101–140

    Google Scholar 

  13. Ma R, Liu Z, Li L, et al. Exfoliating layered double hydroxides in formamide: a method to obtain positively charged nanosheets. Journal of Materials Chemistry, 2006, 16(39): 3809–3813

    Article  Google Scholar 

  14. Kumar G S, Girija E K, Thamizhavel A, et al. Synthesis and characterization of bioactive hydroxyapatite–calcite nanocomposite for biomedical applications. Journal of Colloid and Interface Science, 2010, 349(1): 56–62

    Article  Google Scholar 

  15. Guo S, Li D, Zhang W, et al. Preparation of an anionic azo pigment-pillared layered double hydroxide and the thermo-and photostability of the resulting intercalated material. Journal of Solid State Chemistry, 2004, 177(12): 4597–4604

    Article  Google Scholar 

  16. Wang J, Li D, Yu X, et al. Hydrotalcite conversion coating on Mg alloy and its corrosion resistance. Journal of Alloys and Compounds, 2010, 494(1–2): 271–274

    Article  Google Scholar 

  17. Syu J H, Uan J Y, LinMC, et al. Optically transparent Li–Al–CO3 layered double hydroxide thin films on an AZ31 Mg alloy formed by electrochemical deposition and their corrosion resistance in a dilute chloride environment. Corrosion Science, 2013, 68: 238–248

    Article  Google Scholar 

  18. Chen H, Zhang F, Chen T, et al. Comparison of the evolution and growth processes of films of M/Al-layered double hydroxides with M= Ni or Zn. Chemical Engineering Science, 2009, 64(11): 2617–2622

    Article  Google Scholar 

  19. Liu J, Li Y, Huang X, et al. Layered double hydroxide nano-and microstructures grown directly on metal substrates and their calcined products for application as Li-ion battery electrodes. Advanced Functional Materials, 2008, 18(9): 1448–1458

    Article  Google Scholar 

  20. Hsieh Z L, Lin M C, Uan J Y. Rapid direct growth of Li–Al layered double hydroxide (LDH) film on glass, silicon wafer and carbon cloth and characterization of LDH film on substrates. Journal of Materials Chemistry, 2011, 21(6): 1880–1889

    Article  Google Scholar 

  21. Lin J, Hsia C, Uan J. Characterization of Mg, Al-hydrotalcite conversion film on Mg alloy and Cl–and anion-exchangeability of the film in a corrosive environment. Scripta Materialia, 2007, 56 (11): 927–930

    Article  Google Scholar 

  22. Uan J-Y, Yu B-L, Pan X-L. Morphological and microstructural characterization of the aragonitic CaCO3/Mg,Al-hydrotalcite coating on Mg–9 wt Pct Al–1 wt Pct Zn alloy to protect against corrosion. Metallurgical and Materials Transactions A, 2008, 39 (13): 3233–3245

    Article  Google Scholar 

  23. Lin J, Uan J. Formation of Mg, Al-hydrotalcite conversion coating on Mg alloy in aqueous HCO -3 =CO 2-3 and corresponding protection against corrosion by the coating. Corrosion Science, 2009, 51(5): 1181–1188

    Article  Google Scholar 

  24. Uan J-Y, Lin J-K, Sun Y-S, et al. Surface coatings for improving the corrosion resistance and cell adhesion of AZ91D magnesium alloy through environmentally clean methods. Thin Solid Films, 2010, 518(24): 7563–7567

    Article  Google Scholar 

  25. Yu B-L, Lin J-K, Uan J-Y. Applications of carbonic acid solution for developing conversion coatings on Mg alloy. Transactions of Nonferrous Metals Society of China, 2010, 20(7): 1331–1339

    Article  Google Scholar 

  26. Lin J-K, Jeng K-L, Uan J-Y. Crystallization of a chemical conversion layer that forms on AZ91D magnesium alloy in carbonic acid. Corrosion Science, 2011, 53(11): 3832–3839

    Article  Google Scholar 

  27. Chen J, Song Y W, Shan D Y, et al. In situ growth of Mg–Al hydrotalcite conversion film on AZ31 magnesium alloy. Corrosion Science, 2011, 53(10): 3281–3288

    Article  Google Scholar 

  28. Chen J, Song Y W, Shan D Y, et al. Study of the in situ growth mechanism of Mg–Al hydrotalcite conversion film on AZ31 magnesium alloy. Corrosion Science, 2012, 63: 148–158

    Article  Google Scholar 

  29. Chen J, Song Y W, Shan D Y, et al. Study of the corrosion mechanism of the in situ growth Mg–Al–CO 2-3 hydrotalcite film on AZ31 alloy. Corrosion Science, 2012, 65: 268–277

    Article  Google Scholar 

  30. Chen J, Song Y, Shan D, et al. Modifications of the hydrotalcite film on AZ31 Mg alloy by phytic acid: The effects on morphology, composition and corrosion resistance. Corrosion Science, 2013, 74: 130–138

    Article  Google Scholar 

  31. Zeng R C, Liu Z G, Zhang F, et al. Corrosion of one-step formation of in-situ LDH conversion film on AZ31 magnesium alloy. Transactions of Nonferrous Metals Society of China, 2015, 25(6): 1917–1925

    Article  Google Scholar 

  32. Vega J M, Granizo N, de la Fuente D, et al. Corrosion inhibition of aluminum by coatings formulated with Al–Zn–vanadate hydrotalcite. Progress in Organic Coatings, 2011, 70(4): 213–219

    Article  Google Scholar 

  33. Li D, Wang F, Yu X, et al. Anticorrosion organic coating with layered double hydroxide loaded with corrosion inhibitor of tungstate. Progress in Organic Coatings, 2011, 71(3): 302–309

    Article  Google Scholar 

  34. Yu X, Wang J, Zhang M, et al. Synthesis, characterization and anticorrosion performance of molybdate pillared hydrotalcite/in situ created ZnO composite as pigment for Mg–Li alloy protection. Surface and Coatings Technology, 2008, 203(3–4): 250–255

    Article  Google Scholar 

  35. Foad El-Sherbini E E, Abd-El-Wahab S M, Amin M A, et al. Electrochemical behavior of tin in sodium borate solutions and the effect of halide ions and some inorganic inhibitors. Corrosion Science, 2006, 48(8): 1885–1898

    Article  Google Scholar 

  36. Zhang F, Liu Z G, Zeng R C, et al. Corrosion resistance of Mg–Al–LDH coating on magnesium alloy AZ31. Surface and Coatings Technology, 2014, 258: 1152–1158

    Article  Google Scholar 

  37. Zeng R C, Liu Z G, Zhang F, et al. Corrosion of molybdate intercalated hydrotalcite coating on AZ31 Mg alloy. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2014, 2(32): 13049–13057

    Article  Google Scholar 

  38. Zomorodian A, Garcia M P, Moura e Silva T, et al. Corrosion resistance of a composite polymeric coating applied on biodegradable AZ31 magnesium alloy. Acta Biomaterialia, 2013, 9(10): 8660–8670

    Article  Google Scholar 

  39. Ostrowski N, Lee B, Enick N, et al. Corrosion protection and improved cytocompatibility of biodegradable polymeric layer-bylayer coatings on AZ31 magnesium alloys. Acta Biomaterialia, 2013, 9(10): 8704–8713

    Article  Google Scholar 

  40. Ostrowski N J, Lee B, Roy A, et al. Biodegradable poly(lactideco-glycolide) coatings on magnesium alloys for orthopedic applications. Journal of Materials Science: Materials in Medicine, 2013, 24(1): 85–96

    Google Scholar 

  41. Shukor F, Hassan A, Islam M S, et al. Effect of ammonium polyphosphate on flame retardancy, thermal stability and mechanical properties of alkali treated kenaf fiber filled PLA biocomposites. Materials & Design, 2014, 54: 425–429

    Article  Google Scholar 

  42. Chen Y, Song Y, Zhang S, et al. Interaction between a high purity magnesium surface and PCL and PLA coatings during dynamic degradation. Biomedical Materials, 2011, 6(2): 025005

    Article  Google Scholar 

  43. Wang L, Zhang K, Sun W, et al. Hydrothermal synthesis of corrosion resistant hydrotalcite conversion coating on AZ91D alloy. Materials Letters, 2013, 106: 111–114

    Article  Google Scholar 

  44. Ishizaki T, Chiba S, Watanabe K, et al. Corrosion resistance of Mg–Al layered double hydroxide container-containing magnesium hydroxide films formed directly on magnesium alloy by chemical-free steam coating. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 2013, 1(31): 8968–8977

    Article  Google Scholar 

  45. Ji C, Annabi N, Hosseinkhani M, et al. Fabrication of poly-DLlactide/polyethylene glycol scaffolds using the gas foaming technique. Acta Biomaterialia, 2012, 8(2): 570–578

    Article  Google Scholar 

  46. Vreugdenhil A, Gelling V, Woods M, et al. The role of crosslinkers in epoxy–amine crosslinked silicon sol–gel barrier protection coatings. Thin Solid Films, 2008, 517(2): 538–543

    Article  Google Scholar 

  47. Qian M, Mcintosh S A, Tan X H, et al. Two-part epoxy-siloxane hybrid corrosion protection coatings for carbon steel. Thin Solid Films, 2009, 517(17): 5237–5242

    Article  Google Scholar 

  48. Zeng R C, Hu Y, Guan S K, et al. Corrosion of magnesium alloy AZ31: The influence of bicarbonate, sulphate, hydrogen phosphate and dihydrogen phosphate ions in saline solution. Corrosion Science, 2014, 86: 171–182

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Rong-Chang Zeng or Fen Zhang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zeng, RC., Li, XT., Liu, ZG. et al. Corrosion resistance of Zn–Al layered double hydroxide/poly(lactic acid) composite coating on magnesium alloy AZ31. Front. Mater. Sci. 9, 355–365 (2015). https://doi.org/10.1007/s11706-015-0307-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11706-015-0307-7

Keywords

Navigation