Correction to: J Therm Spray Tech (2018) 27:207–219 https://doi.org/10.1007/s11666-017-0669-8
The article “Effect of Particle and Carbide Grain Sizes on a HVOAF WC-Co-Cr Coating for the Future Application on Internal Surfaces: Microstructure and Wear”, written by Pulsford et al., was originally published electronically on the publisher’s internet portal (currently SpringerLink) on 1st December 2017 without open access. With the author(s)’ decision to opt for Open Choice the copyright of the article changed on June 5, 2018 to © The Author(s) 2017 and the article is forthwith distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, duplication, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made. The original article was corrected.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Pulsford, J., Kamnis, S., Murray, J. et al. Correction to: Effect of Particle and Carbide Grain Sizes on a HVOAF WC-Co-Cr Coating for the Future Application on Internal Surfaces: Microstructure and Wear. J Therm Spray Tech 27, 909 (2018). https://doi.org/10.1007/s11666-018-0726-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11666-018-0726-y