Abstract
In the present work, the influence of step annealing heat treatment on the microstructure and pitting corrosion resistance of super duplex stainless steel UNS S32760 welds have been investigated. The pitting corrosion resistance in chloride solution was evaluated by potentiostatic measurements. The results showed that step annealing treatments in the temperature ranging from 550 to 1000 °C resulted in a precipitation of sigma phase and Cr2N along the ferrite/austenite and ferrite/ferrite boundaries. At this temperature range, the metastable pits mainly nucleated around the precipitates formed in the grain boundary and ferrite phase. Above 1050 °C, the microstructure contains only austenite and ferrite phases. At this condition, the critical pitting temperature of samples successfully arrived to the highest value obtained in this study.
Similar content being viewed by others
References
V. Muthupandi, P. Bala Srinivasan, S.K. Seshadri, and S. Sundaresan, Effect of Weld Metal Chemistry and Heat Input on the Structure and Properties of Duplex Stainless Steels, Mater. Sci. Eng. A, 2003, 358, p 9–16
R.N. Gunn, Duplex Stainless Steels—Microstructure Properties and Applications, Abington Publishing, Cambridge, 2003
K.M. Lee, H.S. Cho, and D.C. Chjoi, Effect of Isothermal Treatment of SAF 2205 Duplex Stainless Steel on Migration of δ/γ Interface Boundary and Growth of Austenite, J. Alloys Compd., 1999, 285, p 156–161
D.Y. Kobayashi and S. Wolynec, Evaluation of the Low Corrosion Resistant Phase Formed During the Sigma Phase Precipitation in Duplex Stainless Steels, Mater. Res., 1999, 2(4), p 239–247
J.C. Lippold and D.J. Kotecki, Welding Metallurgy and Weldability of Stainless Steels, John Wiley & Sons, New York, 2005
J.O. Nilsson, Super Duplex Stainless Steels, Mater. Sci. Technol., 1992, 8, p 685–700
A.J. Ramirez, J.C. Lippold, and S.D. Brandi, The Relationship Between Chromium Nitride and Secondary Austenite Precipitation in Duplex Stainless Steels, Met. Mater. Trans. A, 2003, 34, p 1575–1597
S.S.M. Tavares, J.M. Pardal, L.D. Lima, I.N. Bastos, A.M. Nascimento, and J.A. de Souza, Characterization of Microstructure, Chemical Composition, Corrosion Resistance and Toughness of a Multipass Weld Joint of Superduplex Stainless Steel UNS S32750, Mater. Charact., 2007, 58, p 610–616
L. Duprez, B.D. Cooman, and N. Akdut, Microstructure Evolution During Isothermal Annealing of a Standard Duplex Stainless Steel Type 1.4462, Steel Res., 2000, 71, p 417–422
C.J. Park and H.S. Kwon, Electrochemical Noise Analysis of Localized Corrosion of Duplex Stainless Steel Aged at 475 °C, Mater. Chem. Phys., 2005, 91, p 355–360
H. Tan, Y. Jiang, B. Deng, T. Sun, J. Xu, and J. Li, Effect of Annealing Temperature on the Pitting Corrosion Resistance of Super Duplex Stainless Steel UNS S32750, Mater. Charact., 2009, 60, p 1049–1054
L. Zhang, W. Zhang, Y. Jiang, B. Deng, D. Sun, and J. Li, Influence of Annealing Treatment on the Corrosion Resistance of Lean Duplex Stainless Steel 2101, Electrochim. Acta, 2009, 54, p 5387–5392
W. Zhang, L. Jiang, J. Hu, and H. Song, Effect of Ageing on Precipitation and Impact Energy of 2101 Economical Duplex Stainless Steel, Mater. Charact., 2009, 60, p 50–55
F. Shi, L.J. Wang, W.F. Cui, and C.M. Liu, Precipitation Behavior of M2N in a High-Nitrogen Austenitic Stainless Steel During Isothermal Aging, Acta Metall. Sin. (Engl. Lett.), 2007, 20(2), p 95–101
B. Deng, Z. Wang, Y. Jiang, H. Wang, J. Gao, and J. Li, Evaluation of Localized Corrosion in Duplex Stainless Steel Aged at 850 °C With Critical Pitting Temperature Measurement, Electrochim. Acta, 2008, 54, p 2790–2794
B. Deng and Y. Jiang, Dependence of Critical Pitting Temperature on the Concentration of Sulphate Ion in Chloride-Containing Solutions, Appl. Surf. Sci., 2007, 253, p 7369–7375
M.H. Moayed and N.J. Laycock, Dependence of the Critical Pitting Temperature on surface roughness, Corros. Sci., 2003, 45, p 1203–1216
R. Ovarfort, Critical Pitting Temperature Measurements of Stainless Steels With An Improved Electrochemical Method, Corros. Sci., 1989, 29, p 987–993
Image Tool Version 3.0, University of Texas Health Science Center at San Antonio, Free Software, Available in http://ddsdx.uthscsa.edu/dig/itdesc.html. Accessed 9.3.2007
J.M. Pardal, S.S.M. Tavares, M. Cindra Fonseca, J.A. De Souza, R.R.A. Côrte, and H.F.G. De Abreu, Influence of the Grain Size on Deleterious Phase Precipitation in Superduplex Stainless Steel UNS S32750, Mater. Charact., 2009, 60, p 165–172
C.J. Park, H.S. Kwon, and M.M. Lohrengel, Micro-Electrochemical Polarization Study on 25% Cr Duplex Stainless Steel, Mater. Sci. Eng. A, 2004, 372, p 180–185
Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels, Designation, p 150–199
M.E. Wilms, V.J. Gadgil, J.M. Krougmen, and F.P. Ijsseling, The Effect of σ-Phase Precipitation at 800 °C on the Corrosion Resistance in Sea-Water of a High Alloyed Duplex Stainless Steel, Corros. Sci., 1994, 36, p 877–881
L. Zhang, Y. Jiang, B. Deng, W. Zhang, J. Xu, and J. Li, Effect of Aging on the Corrosion Resistance of 2101 Lean Duplex Stainless Steel, Mater. Charact., 2009, 60, p 1522–1528
R. Badji, M. Bouabdallah, B. Bacroix, C. Kahloun, B. Belkessa, and H. Maza, Phase Transformation and Mechanical Behavior in Annealed 2205 Duplex Stainless Steel Welds, Mater. Charact., 2008, 59, p 447–453
M. Pohl, O. Storz, and T. Glogowski, Effect of Intermetallic Precipitations on the Properties of Duplex Stainless Steel, Mater. Charact., 2007, 58, p 65–71
V.S. Moura, L.D. Lima, J.M. Pardal, A.Y. Kina, R.R.A. Corte, and S.S.M. Tavares, Influence of Microstructure on the Corrosion Resistance of the Duplex Stainless Steel UNS S31803, Mater. Charact., 2008, 59, p 1127–1132
G. Lothongkum, P. Wongpanya, S. Morito, T. Furuhara, and T. Maki, Effect of Nitrogen on Corrosion Behavior of 28Cr-7Ni Duplex and Microduplex Stainless Steels in Air-Saturated 3.5% NaCl Solution, Corros. Sci., 2006, 48, p 137–153
L. Weber and P.J. Uggowitzer, Partitioning of Chromium and Molybdenum in Duplex Stainless Steels With Respect to Nitrogen and Nickel Content, Mater. Sci. Eng. A, 1998, 242, p 222–229
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yousefieh, M., Shamanian, M. & Saatchi, A. Influence of Step Annealing Temperature on the Microstructure and Pitting Corrosion Resistance of SDSS UNS S32760 Welds. J. of Materi Eng and Perform 20, 1678–1683 (2011). https://doi.org/10.1007/s11665-011-9834-2
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-011-9834-2