Abstract
Recently, there has been an increasing interest in silver thin film coated polymer spheres as conductive fillers in isotropic conductive adhesives (ICAs). Such ICAs yield resistivities similar to conventional silver flake based ICAs while requiring only a fraction of the silver content. In this work, effects of the nanostructure of silver thin films on inter-particle contact resistance were investigated. The electrical resistivity of ICAs with similar particle content was shown to decrease with increasing coating thickness. Scanning electron micrographs of ion milled cross-sections revealed that the silver coatings formed continuous metallurgical connections at the contacts between the filler particles after adhesive curing at 150°C. The electrical resistivity decreased for all samples after environmental treatment for 3 weeks at 85°C/85% relative humidity. It was concluded that after the metallurgical connections formed, the bulk resistance of these ICAs were no longer dominated by the contact resistance, but by the geometry and nanostructure of the silver coatings. A figure of merit (FoM) was defined based on the ratio between bulk silver resistivity and the ICA resistivity, and this showed that although the resistivity was lowest in the ICAs containing the most silver, the volume of silver was more effectively used in the ICAs with intermediate silver contents. This was attributed to a size effect due to smaller grains in the thickest coating.
Article PDF
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Avoid common mistakes on your manuscript.
References
Y. Li, D. Lu, and C.P. Wong, Electrical Conductive Adhesives with Nanotechnologies (New York: Springer, 2010), pp. 121–225.
J. Gakkestad, Z. Li, T. Helland, and C.P. Wong, IEEE Electron. Packag. Technol. Conf., 15th (2013) doi:10.1109/ EPTC.2013.6745715.
H.V. Nguyen, E. Andreassen, H. Kristiansen, and K.E. Aasmundtveit, IEEE Trans. Comp. Packag. Manuf. Technol. (2013). doi:10.1109/TCPMT.2013.2259166
H.V. Nguyen, E. Andreassen, H. Kristiansen, R. Johannessen, N. Hoivik, and K.E. Aasmundtveit, Mater. Des. 46, 784 (2013).
S. Jain, D.C. Whalley, M. Cottrill, H. Kristiansen, K. Redford, C.B. Nilsen, T. Helland, and C. Liu, Microelectronics and Packaging Conference (EMPC), 2011 18th European (Brighton, UK 2011).
S. Jain, D.C. Whalley, M. Cottrill, H. Kristiansen, K. Redford, S. Helland, T. Helland, E. Kalland, and C. Liu, Microelectronics Packaging Conference (EMPC), 2013 European (Grenoble, France 2013).
S. Jain, D.C. Whalley, M. Cottrill, T. Helland, H. Kristiansen, K. Redford, and C. Liu, IEEE Electron. Compon. Technol. Conf. (2013). doi:10.1109/ECTC.2013.6575664.
G.R. Ruschau, S. Yoshikawa, and R.E. Newnham, J. Appl. Phys. 72, 953 (1992).
D. Lu, Q.K. Tong, and C.P. Wong, Proc. Int. Symp. Adv. Packag. Mater.: Processes, Prop. Interfaces (1999) doi:10.1109/ISAPM.1999.757278
R. Holm, Electric Contacts: Theory and Application, 4th ed. (Berlin: Springer, 2000), pp. 1–16, 118–134.
A.F. Mayadas and M. Shatzkes, Phys. Rev. B 1, 1382 (1970).
U. Kreibig and C.V. Fragstein, Z. Phys. 224, 307 (1969).
H. Jiang, K.S. Moon, J. Lu, and C.P. Wong, J. Electron. Mater. 34, 1432 (2005).
H. Jiang, K.S. Moon, Y. Li, and C.P. Wong, Chem. Mater. 18, 2969 (2006).
Y. Li, K.S. Moon, and C.P. Wong, J. Appl. Polym. Sci. 99, 1665 (2006).
J. Brandrup, E.H. Immergut, E.A. Grulke, A. Abe, and D.R. Bloch, Polymer Handbook, 4th edn. vol. 1. (Wiley, New York, 1999), pp. V/87, VI/203–VI/204.
D.R. Lide, CRC Handbook of Chemistry and Physics, 84th ed. (Boca Raton: CRC Press, 2003), pp. 12–220.
E.M. Petrie, Epoxy Adhesive Formulations, 1st ed. (New York: McGraw-Hill Education, 2006), pp. 57–58.
C. Oh, S. Nagao, T. Kunimune, and K. Suganuma, Appl. Phys. Lett. 104, 161603 (2014).
C. Oh, S. Nagao, and K. Suganuma, J. Electron. Mater. 43, 4406 (2014).
C. Oh, S. Nagao, T. Sugahara, and K. Suganuma, Mater. Lett. 137, 170 (2014).
C. Oh, S. Nagao, and K. Suganuma, J. Mater. Sci.: Mater. Electron. 26, 2525 (2015).
P.L. Redmond, A.J. Hallock, and L.E. Brus, Nano Lett. 5, 131 (2005).
Author information
Authors and Affiliations
Corresponding author
Additional information
Sigurd R. Pettersen: Parts of this work were done during an academic stay at Institute of Scientific and Industrial Research (ISIR), Osaka University, 565-0871, Japan.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Pettersen, S.R., Kristiansen, H., Nagao, S. et al. Contact Resistance and Metallurgical Connections Between Silver Coated Polymer Particles in Isotropic Conductive Adhesives. J. Electron. Mater. 45, 3734–3743 (2016). https://doi.org/10.1007/s11664-016-4498-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-016-4498-1