Skip to main content
SpringerLink
Log in

Au-In-based Hermetic Sealing for MEMS Packaging for Down-Hole Application

  • Published:
Journal of Electronic Materials Aims and scope Submit manuscript

Abstract

Hermetic sealing of micro-electro mechanical systems (MEMS) sensors for down-hole application requires high-quality void-free bonds, with metallic hermetic sealing being widely used for this purpose. As most of the MEMS sensors cannot withstand high temperatures, transient liquid phase (TLP) bonding is promising for metallic sealing applications, since the re-melting temperature of the bond is much higher than the bonding temperature. In this paper, major issues involving TLP bonding, including non-uniform diffusion kinetics across the interface and the formation of intermetallic compounds prior to bonding for fast reactive metallic systems like Au-In, have been addressed by using diffusion barriers. The performance of various diffusion barriers that include Ti, Ni, and Pt has been evaluated. Ni has been determined to be a prospective candidate, since it averts diffusion to a certain extent prior to TLP bonding. The mechanical strength and hermeticity of the Au-In joints have also been characterized after aging at 300 °C up to 500 h. No major changes in the thermo-mechanical properties of the AuIn and AuIn2 phases were observed and, hence, these phases are concluded to be thermally stable at this temperature regime. Improvements in hermeticity were confirmed when subjected to high-temperature thermal aging.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. J. Watson, High-temperature electronics pose design and reliability challenges (Analog Dialogue, April 2012), http://www.analog.com/library/analogDialogue/. Accessed 15 July 2013.

  2. V. Chidambaram, H.B. Yeung, and G. Shan, J. Electron. Mater. 41, 8 (2012).

    Article  Google Scholar 

  3. S.-H. Choa, J. Microsyst. Technol. (2005). doi:10.1007/s00542-005-0603-8.

    Google Scholar 

  4. W.C. Welch III and K. Najafi, Proceedings of the International Conference on MEMS (Tucson, United States, 2008), p. 806.

  5. W. Zhang, A. Matin, E. Beyne, and W. Ruythooren, Proceedings of the Electronic Components and Technology Conference (Singapore, 2008), p. 1984.

  6. H. Okamoto, Binary Alloy Phase Diagrams, updating service (ASM International Materials Park, 1992).

  7. F.S. Shieu, C.F. Chen, J.G. Sheen, and Z.C. Chang, Thin Solid Films 346, 1 (1999).

    Article  Google Scholar 

  8. J. Baborowski, A. Pezous, G.S. Durante, R.J. James, R. Ziltener, C. Muller, and M.-A. Dubois, Proceedings of the Eurosensors XXIII Conference (Lausanne, Switzerland, 2009), p. 1535.

  9. S.T. Riches, C. Johnston, M. Sousa, P. Grant, J. Guilliver, M. Langley, R. Pittson, and M. Firmstone, Proceedings of the International Conference of High-Temperature Electronics (Albuquerque, United States, 2008), p. 265.

  10. C. Johnston, Proceedings of the International Conference of High-Temperature Electronics (Albuquerque, United States, 2008), p. 1.

  11. W. Zhang and W. Ruythooren, J. Electron. Mater. 37, 8 (2008).

    Google Scholar 

  12. J. Bjontegaard, L. Buene, T. Finstad, O. Lonsjo, and T. Olsen, Thin Solid Films 101, 253 (1983).

    Article  Google Scholar 

  13. W. Zhang, A. Matin, E. Beyne, and W. Ruythooren, Proceedings of the Electronic Components and Technology Conference (Singapore, 2008), 1984.

  14. X.-N. Xu, Y.-P. Ren, C.-F. Li, L. Song, and G.-W. Qin, Trans. Nonferrous Met. Soc. China 22, 6 (2012).

    Google Scholar 

  15. A.N. Torgensen, L. Offernes, A. Kjekshus, and A. Olsen, J.␣Alloy. Compd. 314, 1–2 (2001).

    Article  Google Scholar 

  16. M. Waelti, N. Scheeberger, O. Brand, and H. Baltes, Proceedings of the International Symposium on Materials Research Society (San Francisco, United States, 2000), p. 183.

  17. X.J. Huang, S.-W. Ricky Lee, and W.S. Tae, Proceedings of the Electronic Components and Technology Conference (Singapore, 2000), p. 86.

  18. S. Egelkraut, L. Frey, M. Knoerr, and A. Schletz, Proceedings of the 12th Electronic Packaging Technology Conference (Singapore, 2010), p. 660.

  19. I. De Wolf, A. Jourdain, P. De Moor, A.C. Tilmans, and L. Marchand, Proceedings of the International Symposium on the Physical and Failure Analysis of Integrated Circuits (Bangalore, India, 2007), p. 147.

Download references

Acknowledgement

The authors acknowledge the Singapore Science and Research Council (SERC—Grant No. 102 165 0082) for financial support through the innovation consortium “Rugged Electronics” program.

Author information

Authors and Affiliations

  1. Institute of Microelectronics, A*STAR (Agency for Science, Technology and Research), 11 Science Park Road, Singapore Science Park II, Singapore, 117685, Singapore

    Vivek Chidambaram, Chen Bangtao & Daniel Rhee Min Woo

  2. School of Materials Science and Engineering, Nanyang Technological University, Singapore, Singapore

    Gan Chee Lip

Authors
  1. Vivek Chidambaram
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Chen Bangtao
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Gan Chee Lip
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Daniel Rhee Min Woo
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Vivek Chidambaram.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Chidambaram, V., Bangtao, C., Lip, G.C. et al. Au-In-based Hermetic Sealing for MEMS Packaging for Down-Hole Application. J. Electron. Mater. 43, 2498–2509 (2014). https://doi.org/10.1007/s11664-014-3131-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11664-014-3131-4

Keywords

Search

Navigation