Abstract
This study examined the effect of site and elevation on the oven-dry density and volumetric shrinkage of hornbeam (Carpinus betulus) wood. For this purpose, 45 normal hornbeam trees from three different sites (Mazandaran, Guilan and Golestan) at three elevations, 300 m (low elevation), 700 m (intermediate elevation) and 1100 m (high elevation) from natural forest in northern Iran were selected. Disks were cut at breast height from mature wood and test samples were prepared to determine physical properties, i.e., wood density and volumetric shrinkage. The results show that there are significant differences between site and elevation on these physical properties of wood. The interaction effects between site × elevation on wood density and volumetric shrinkage were also statistically significant. At any fixed site, wood density and volumetric shrinkage increased with elevation. As well, their values at Guilan were higher than those at the other two sites. The relationship between wood density and volumetric shrinkage was determined by simple regression equations. Strong, positive relationships between wood density and volumetric shrinkage at each site were found. Again, these were stronger at the Guilan site than at the other two sites. Given a fixed site, the correlation at high elevation was stronger than at the other two elevations.
Similar content being viewed by others
References
Abdi E, Majnounian B, Rahimi H, Zobeiri M. 2009. Distribution and tensile strength of Hornbeam (Carpinus betulus) roots growing on slopes of Caspian Forests, Iran. J Forest Res, 20(2): 105–110
Alden H A. 1997. Softwoods of North America. General Technical Report FPL-GTR-102. U.S. Department of Agriculture, Forest Service, Forest Product Laboratory, Madison, WI, USA
Arian A, Vlosky R P, Zamani M K. 2007. The wood products industry in Iran. Forest Prod, 57(3): 6–13
ASTM D 143-94. 2005. Standard methods of testing small clear specimens of timber. The ASTM Book of Standards. Philadelphia, PA, USA
Aydin S, Yardimci M Y, Ramyar K. 2007. Mechanical properties of four timber species commonly used in Turkey. Turkish J Eng Env Sci, 31: 19–27
Bektaş I, Guler C. 2001. The determination of some physical properties of beech wood (Fagus orientalis Lipsky.) in the Andırın region. Turkish J Agric Forest, 25: 209–215
Cutter B E, Coggeshall M V, Phelps J E, Stoke D D. 2004. Impacts of forest management activities on selected hardwood wood quality attributes: a review. Wood Fiber Sci, 36: 84–97
Dünisch O, Bauch J. 1994. Influence of mineral elements on wood formation of old growth spruce (Picea abies [L.] Karst.). Holzforschung, 48: 5–14
Jones S B Jr, Luchsinger A E. 1986. Plant Systematics. 2nd edn. New York: McGraw-Hill
Golbabaei F, Hossinzade H, Nourbakhsh A, Hossinkhani H, Fakhrian A. 2001. Variations of wood characteristics of Carpinus betulus L. in three elevations of Guilan forests. Iranian J Wood Paper Res, 15: 33–60
Guler C, Copur Y, Akgul M, Buyuksari U. 2007. Some chemical, physical and mechanical properties of juvenile wood from black pine (Pinus nigra Arnold) plantations. J Appl Sci, 7: 755–758
Kiaei M. 2006. Effects of elevations on wood density and fiber properties of Hornbeam in north of Iran. Dissertation for the Master Degree. Tehran, Iran: Islamic Azad University (IAU), Science and Research Branch
Kollmann F F P, Cote W A Jr. 1968. Principles of Wood Science and Technology. I. Solid Wood. Berlin: Springer-Verlag
Kokutse A D, Baillères H, Stokes A, Kokou K. 2004. Proportion and quality of heartwood in Togolese teak (Tectona grandis L.f.). Forest Ecol Manage, 189: 37–48
Mohrdiek O. 1979. Holzdichte und Faserlange bei Populus-Leuce-Arten. Holzzucht J, 33: 23–26 (in German)
Moya R, Pérez L D, Arce V. 2003. Wood density of Tectona grandis at two spacings in Costa Rica plantation. J Trop Forest Prod, 9: 153–161
Pang S. 2002. Predicting anisotropic shrinkage of softwood part 1: theories. Wood Sci Technol, 36(1): 75–91
Panshin A, De Zeeuw C. 1980. Textbook of Wood Technology. 4th edn. New York: McGraw-Hill
Parsapajouh D. 1998. Wood Technology. 4th edn. Tehran: Tehran University
Rehder A. 1927. Manual of Cultivated Trees and Shrubs, Hardy in North America. New York: MacMillan Publishing Co., Inc
Rigatto P A, Dedecek R A, Monteiro de Matos J L. 2004. Influence of soil attributes on quality of Pinus taeda wood for cellulose Kraft production. Revista Arvore, 28: 267–273 (in Portuguese with English abstract)
Tsoumis G. 1991. Science and Technology of Wood. Structure, Properties, Utilization. New York: Van Nostrand Reinhold
Usta I, Guray A. 2000. Comparison of the swelling and shrinkage characteristics of Corcisan pine (Pinus nigra var. mantima). Turkish J Agric Forest, 24: 461–464
Víquez E, Pérez D. 2005. Effect of pruning on tree growth, yield, and wood properties of Tectona grandis plantations in Costa Rica. Silva Fennica, 39: 381–390
Zhang S Y. 1995. Effect of growth rate on wood specific gravity and selected mechanical properties in individual species from distinct wood categories. Wood Sci Technol, 29: 451–465
Zhang S Y. 1997. Wood specific gravity-mechanical property relationship at species level. Wood Sci Technol, 31: 181–191
Zhang S Y. 1998. Effect of age on the variation, correlations and inheritance of selected wood characteristics in black spruce (Picea mariana). Wood Sci Technol, 32: 197–204
Zobel B J, van Buijtenen J P. 1989. Wood Variation: Its Causes and Control. Berlin, Heidelberg, New York: Springer-Verlag
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kiaei, M. Effect of site and elevation on wood density and shrinkage and their relationships in Carpinus betulus . For. Stud. China 14, 229–234 (2012). https://doi.org/10.1007/s11632-012-0310-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11632-012-0310-3