Abstract
Assembly lines are useful for mass production of standard as well as customized products. Line balancing is an important issue, in this regard an optimal or near optimal balance can provide a fruitful savings in the initial cost and also in the running cost of such production systems. A survey of different problems in different types of assembly lines and some of the critical and on going research areas are highlighted here. The provided research information is momentous for the research community in assembly line area to proceed further in the presented issues of assembly lines.
Similar content being viewed by others
References
Shtub A, Dar-El E M. A methodology for the selection of assembly systems. International Journal of Production Research, 1989, 27(1): 175–186
Mather H. Competitive manufacturing. Prentice Hall, Englewood Cliffs, NJ, 1989
Pine B J. Mass customization: The new frontier in business competition. Harvard Business School Press, Boston, Mass, 1993
Becker C, Scholl A. A survey on problems and methods in generalized assembly line balancing. European Journal of Operational Research, 2006, 168(3): 694–715
Nils Boysen, Malte Fliedner, Armin Scholl. A classification of assembly line balancing problems. European Journal of Operational Research, 2007, 2007: 674–693.
Baybars I. A survey of exact algorithms for the simple assembly line balancing problem. Management Science, 1986, 32(8): 909–932
Ghosh S, Gagnon R. A comprehensive literature review and analysis of the design, balancing and scheduling of assembly systems. International Journal of Production Research, 1989, 27(4): 637–670
Erel E, Sarin S. A survey of the assembly line balancing procedures. Production Planning and Control, 1998, 9(5): 414–434
Scholl A, Becker C. State-of-the-art exact and heuristic solution procedures for simple assembly line balancing. European Journal of Operational Research, 2006, 168(3): 666–693
Boysen N, Fliedner M, Scholl A. Assembly line balancing: Which model to use when? International Journal of Production Economics, 2008, 111(2): 509–528
Urban T L, Chiang W C. An optimal piecewise-linear program for the U-line balancing problem with stochastic task times. European Journal of Operational Research, 2006, 168(3): 109–120
Altiparmak A, Bugak A, Dengiz B. Optimization of buffer sizes in assembly systems using intelligent techniques. In Proceedings of Winter Simulation Conference, San Diego, USA, 2002, 1157–1162.
D’Souza K, Khator S. System reconfiguration to avoid deadlocks in automated manufacturing systems. Computers & Industrial Engineering, 1997, 32(2): 445–465
Hamada M, Martz H, Berg E, Koehler A. Optimizing the productbased avaibility of a buffered industrial process. Reliability Engineering & System Safety, 2006, 91(9): 1039–1048
Battini D, Faccio M, Persona A, Sgarbossa F. Design of the optimal feeding policy in an assembly system. International Journal of Production Economics, 2009, 121(1): 233–254
Gershwin S, Schor J. Efficient algorithms for buffer space allocation. Annals of Operations Research, 2000, 93(1/4): 117–144
Thomopoulos N T. Mixed model line balancing with smoothed station assignments. Management Science, 1970, 16(9): 593–603
Dar-El E M, Nadivi A. A mixed-model sequencing application. International Journal of Production Research, 1981, 19(1): 69–84
Kim Y K, Kim Y J, Kim Y, 0, 0. Genetic algorithms for assembly line balancing with various objectives. Computers & Industrial Engineering, 1996, 30(3): 397–409
Simaria A S, Vilarinho P M. A genetic algorithm based approach to the mixed model assembly line balancing problem of type II. Computers & Industrial Engineering, 2004, 47(4): 391–407
Mansouri S A. A multi-objective genetic algorithm for mixed-model sequencing on JIT assembly lines. European Journal of Operational Research, 2005, 167(3): 696–716
Karabati S, Sayin S. Assembly line balancing in a mixed-model sequencing environment with synchronous transfers. European Journal of Operational Research, 2003, 149(2): 417–429
Kim Y K, Kim J Y, Kim Y. A coevolutionary algorithm for balancing and sequencing in mixed model assembly lines. Applied Intelligence, 2000a, 13(3): 247–258
Kim Y K, Kim J Y, Kim Y A. An endosymbiotic evolutionary algorithm for the integration of balancing and sequencing in mixed-model U-lines. European Journal of Operational Research, 2006, 168(3): 838–852
Merengo C, Nava F, Pozzetti A. Balancing and sequencing manual mixed-model assembly lines. International Journal of Production Research, 1999, 37(12): 2835–2860
Ozcan U, Cercioglu H, Gokcen H, Toklu B. Balancing and sequencing of parallel mixed-model assembly lines. International Journal of Production Research, 2010, 48(17): 5089–5113
Hwang R, Katayama H. Integrated procedure of balancing and sequencing for mixed-model assembly lines: a multi-objective evolutionary approach. International Journal of Production Research, 2010, 48(21): 6417–6441
Mosadegh H, Zandieh M, Fatemi Ghomi S M T. Simultaneous solving of balancing and sequencing problems with station-dependent assembly times for mixed-model assembly lines. Applied Soft Computing, 2012, 12(4): 1359–1370
Boysen N. VariantenflieXfertigung, Gabler, Wiesbaden, 2005.
Pinto P A, Dannenbring D G, Khumawala BM. A branch and bound algorithm for assembly line balancing with paralleling. International Journal of Production Research, 1975, 13(2): 183–196
Miltenburg J, Wijngaard J. U-line Line Balancing Problem. Management Science, 1994, 40(10): 1378–1388
Miltenburg J. The effect of breakdowns on U-shaped production lines. International Journal of Production Research, 2000, 38(2): 353–364
Hirano H. JIT Factory Revolution. Productivity Press, Cambridge, MA, 1988.
Sekine K. One-Piece Flow. Productivity Press, Portland, OR, 1992.
Miltenburg J, Sparling D. Optimal solution algorithms for the U-line balancing problem. Working Paper. McMaster University, Hamilton, 1995.
Sparling D, Miltenburg J. The mixed-model U-line balancing problem. International Journal of Production Research, 1998, 36(2): 485–501
Chand S, Zeng T. A comparison of U-line and straightline performances under stochastic task times. Manufacturing and Service Operations Management, 2001, 3(2): 138–150
Guerriero F, Miltenburg J. The stochastic U-line balancing problem. Naval Research Logistics, 2003, 50(1): 31–57
Bartholdi J J. Balancing two-sided assembly lines: A case study. International Journal of Production Research, 1993, 31(10): 2447–2461
Lee T O, Kim Y, Kim Y K. Two-sided assembly line balancing to maximize work relatedness and slackness. Computers & Industrial Engineering, 2001, 40(3): 273–292
Agnetis A, Ciancimino A, Lucertini M, Pizzichella M. Balancing flexible lines for car components assembly. International Journal of Production Research, 1995, 33(2): 333–350
Chica M, Cordón Ó, Damas S. An advanced multiobjective genetic algorithm design for the time and space assembly line balancing problem. Computers & Industrial Engineering, 2011, 61(1): 103–117
Hamta N, Fatemi G S M T, Jolai F. Akbarpour Shirazi M. A hybrid PSO algorithm for a multi-objective assembly line balancing problem with flexible operation times, sequence-dependent setup times and learning effect. International Journal of Production Economics, 2013, 141(1): 99–111
Ponnambalam S G, Aravindan P, Mogileeswar Naidu G. A multiobjective genetic algorithm for solving assembly line balancing problem. International Journal of Advanced Manufacturing Technology, 2000, 16(5): 341–352
Wei N C, Chao I M, 0. A solution procedure for type E-simple assembly line balancing problem. Computers & Industrial Engineering, 2011, 61(3): 824–830
Nourmohammadi A, Zandieh M. Assembly line balancing by a new multi-objective differential evolution algorithm based on TOPSIS. International Journal of Production Research, 2011, 49(10): 2833–2855
Cakir B, Altiparmak F, Dengiz B. Multi-objective optimization of a stochastic assembly line balancing: a hybrid simulated annealing algorithm. Computers & Industrial Engineering, 2011, 60(3): 376–384
Mcmullen P R, Tarasewich P. Multi-objective assembly line balancing via a modified ant colony optimization technique. International Journal of Production Research, 2006, 44(1): 27–42
Malakooti B, Kumar A. A knowledge-based system for solving multi-objective assembly line balancing problems. International Journal of Production Research, 1996, 34(9): 2533–2552
Askin R G, Zhou M. A parallel station heuristic for the mixed-model production line balancing problem. International Journal of Production Research, 1997, 35(11): 3095–3105
Gokcen H, Erel E. A goal programming approach to mixed-model assembly line balancing problem. International Journal of Production Economics, 1997, 48(2): 177–185
Chen R S, Lu K Y, Yu S C. A hybrid genetic algorithm approach on multi-objective of assembly planning problem. Engineering Applications of Artificial Intelligence, 2002, 15(5): 447–457
Vilarinho P M, Simaria A S. A two-stage heuristic method for balancing mixed-model assembly lines with parallel workstations. International Journal of Production Research, 2002, 40(6): 1405–1420
Bukchin J, Rubinovitz J. A weighted approach for assembly line design with station paralleling and equipment selection. IIE Transactions, 2003, 35(1): 73–85
Gamberini R, Grassi A, Rimini B. A new multi-objective heuristic algorithm for solving the stochastic assembly line re-balancing problem. International Journal of Production Economics, 2006, 102(2): 226–243
Baykasoglu A. Multi-rule multi-objective simulated annealing algorithm for straight and U type assembly line balancing problems. Journal of Intelligent Manufacturing, 2006, 17(2): 217–232
Nearchou A C. Multi-objective balancing of assembly lines by population heuristics. International Journal of Production Research, 2008, 46(8): 2275–2297
Hwang R K, Katayama H, Gen M. U-shaped assembly line balancing problem with genetic algorithm. International Journal of Production Research, 2008, 46(16): 4637–4649
Deb K, Pratap A, Agarwal S, Meyarivan T. A fast and elitist multi objective genetic algorithm: NSGA-II. IEEE Transactions on Evolutionary Computation, 2002, 6(2): 182–197
Carlos A. Coello Coello and Nareli Cruz Cortes. Solving Multi objective Optimization Problems using an Artificial Immune System. Genetic Programming and Evolvable Machines, 2005, 6: 163–190
Agrawal S, Dashora Y, Tiwari M K, Son Y J. Interactive particle swarm: a Pareto-adaptive metaheuristic to multiobjective optimization. IEEE Transactions on Systems, Man, and Cybernetics. Part A, Systems and Humans, 2008, 38(2): 258–277
Yen G G, Leong W F, 0. Dynamic multiple swarms in multiobjective particle swarm optimization. IEEE Transactions on Systems, Man, and Cybernetics. Part A, Systems and Humans, 2009, 39(4): 1013–1027
Wang Y, Dang C, Li H, Han L, Wei J. A clustering multi-objective evolutionary algorithm based on orthogonal and uniform design, in: Proceeding of Congress on Evolutionary Computation. CEC’ 09, 2009, 2927–2933.
Zamuda A, Brest J, Boskovic B, Zumer V. Differential evolution with self adaptation and local search for constrained multiobjective optimization, in: Proceeding of Congress on Evolutionary Computation. CEC’ 09, 2009, 192–202.
Kukkonen S, Lampinen J. Performance assessment of generalized differential evolution with a given set of constrained multi-objective test problems, in: Proceeding of Congress on Evolutionary Computation. CEC’ 09, 2009, 1943–1950.
Yang C, Gao J, Sun L. A multi-objective genetic algorithm for mixed-model assembly line rebalancing. Computers & Industrial Engineering, 2013, 65(1): 109–116
Johnson R V. A branch and bound algorithm for assembly line balancing problems with formulation irregularities. Management Science, 1983, 29(11): 1309–1324
Boucher T O. Choice of assembly line design under task learning. International Journal of Production Research, 1978, 25(4): 513–524
Chakravarty A K. Line balancing with task learning effects. IIE Transactions, 1988, 20(2): 186–193
Shin D. An efficient heuristic for solving stochastic assembly line balancing problems. Computers & Industrial Engineering, 1990, 18(3): 285–295
Buzacott J A. Abandoning the moving assembly line: Models of human operators and job sequencing. International Journal of Production Research, 1990, 28(5): 821–839
Robinson LW, McClain J O, Thomas L J. The good, the bad and the ugly: Quality on an assembly line. International Journal of Production Research, 1990, 28(5): 963–980
Hillier F S, So K C. The effect of machine breakdowns and interstage storage on the performance of production line systems. International Journal of Production Research, 1991, 29(10): 2043–2055
Pike R, Martin G E. The bowl phenomenon in unpaced lines. International Journal of Production Research, 1994, 32(3): 483–499
McMullen P R, Tarasewich P. Using ant techniques to solve the assembly line balancing problem. IIE Transactions, 2003, 35(7): 605–607
Zhao X, Liu J, Ohn K, et al.. Modeling and analysis of a mixed-model assembly line with stochastic operation times. Naval Research Logistics, 2007, 54(6): 681–691
Hop N V. A heuristic solution for fuzzy mixed-model line balancing problem. European Journal of Operational Research, 2006, 168(3): 798–810
Xu W, Xiao T. Mixed model assembly line balancing problem with fuzzy operation times and drifting operations. In: Proceeding of Winter Simulation Conference (WSC 2008). Miami, FL, USA, 2008: 1752–1760.
Moodie C L, Young H H. A heuristic method of assembly line balancing for assumptions of constant or variable work element times. Journal of Industrial Engineering, 1965, 16: 23–29
Kao E P C. Computational experience with a stochastic assembly line balancing algorithm. Computers & Operations Research, 1979, 6(2): 79–86
Sniedovich M. Analysis of a preference order assembly line problem. Management Science, 1981, 27(9): 1067–1080
Nkasu M M, Leung K H. A stochastic approach to assembly line balancing. International Journal of Production Research, 1995, 33(4): 975–991
Kouvelis P, Yu G. Robust Discrete Optimization and Its Applications. Boston, MA, USA: Kluwer Academic Publishers, 1997.
Xu W, Xiao T. Strategic Robust Mixed model assembly line balancing based on scenario planning. Tsinghua Science and Technology, 2011, 16(3): 308–314
Salveson M E. The assembly line balancing problem. Journal of Industrial Engineering, 1955, 6(3): 18–25
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Saif, U., Guan, Z., Wang, B. et al. A survey on assembly lines and its types. Front. Mech. Eng. 9, 95–105 (2014). https://doi.org/10.1007/s11465-014-0302-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11465-014-0302-1