Abstract
This paper proposes an innovative low-cost isolator with lightweight and cost-effective features for use in low-rise residential buildings. The low-cost laminated isolator is formed by plastic shims with unsaturated polyester fiber reinforcement between rubber layers. Performance tests are systematically carried out to characterize the isolator in terms of mechanic behavior (e.g., compression, shear, and their relationship), dynamic properties (e.g., damping), and ultimate states. A design guideline and associated criteria of the low-cost isolator are also provided and discussed in this study. To investigate more detailed behavior, a finite element model of the isolator is developed in ABAQUS and calibrated by the experimental data. The research presented in this paper makes significant contributions to the evaluation of the peak stress and strain demands on isolator’s components and provides technical support for the design and manufacturing of this new type of isolator.
Similar content being viewed by others
References
Moon B Y, Kang G J, Kang B S, et al. Design and manufacturing of fiber reinforced elastomeric isolator for seismic isolation. J Mater Process Tech, 2002, 130–131: 145–150
Pan P, Ye L P, Shi W, et al. Engineering practice of seismic isolation and energy dissipation structures in China. Sci China Tech Sci, 2012, 55: 3036–3046
Kelly J M. Analysis of fiber-reinforced elastomeric isolators. J Seis Earthq Eng, 1999, 2: 19–34
Kelly J M, Taldairov S M. Analytical and experiment study of fiber-reinforced elastomeric isolators. PEER Report 2001/11, Pacific Earthquake Engineering Research Center, University of California, Berkeley, 2001
Tsai H-C, Kelly J M. Stiffness analysis of fiber-reinforced rectangular seismic isolators. J Eng Mech, 2002: 462–470
Zhang H, Peng T B, Li J Z, et al. Study on compression performance of FRP rubber isolator (in Chinese). Earthq Eng Eng Vib, 2011, 31: 154–160
Huang X Y, Zhou F L. Simulating earthquake shaking table of isolation structure with fiber-reinforced isolator and finite element analysis (in Chinese). J Guangzhou Univ (Nat Sci Edtion), 2010, 05: 21–26
Ashkezaria G D, Aghakouchaka A A, Kokabib M. Design, manufacturing and evaluation of the performance of steel like fiber reinforced elastomeric seismic isolators. J Mater Process Tech, 2008, 197: 140–150
Khanlari S, Ashkezari G D, Kokabi M, et al. Fiber-reinforced nanocomposite seismic isolators: Design and manufacturing. Polym Composite. 2010, 31: 209–306
Kanga B-S, Kanga G-J, Moonc B-Y. Hole and lead plug effect on fiber reinforced elastomeric isolator for seismic isolation. J Mater Process Tech, 2003, 140: 592–597
Kang G-J, Kang B-S. Dynamic analysis of fiber-reinforced elastomeric isolation structures. J Mech Sci Technol, 2009, 23: 1132–1141
Toopchi-Nezhad H, Tait M J, Drysdale R G. Testing and modeling of square carbon fiber-reinforced elastomeric seismic isolators. Struct Control Health Monit, 2008, 15: 876–900
Toopchi-Nezhad H, Tait M J, Drysdale R G. Bonded versus unbonded strip fiber reinforced elastomeric isolators: Finite element analysis. Compos Struct, 2011, 93: 850–859
Wang B, Tan P, Xu K. Mechanical performance tests of a novel fiber-reinforced-plastic plate isolation isolator (in Chinese). China Civ Eng J, 2012, 45: 187–191
Tan P, Xu K, Wang B, et al. Performance study of isolated rural buildings using novel simple isolators (in Chinese). China Civ Eng J, 2013, 46: 64–70
GB 20688.3-2006. Rubber Bearing—Part 3: Elastomeric Seismic-protection Isolation for Buildings (in Chinese). Beijing: Standards Press of China, 2007
Higashino M, Okamoto S. Response Control and Seismic Isolator of Buildings. London and New York: Taylor & Francis, 2006
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tan, P., Xu, K., Wang, B. et al. Development and performance evaluation of an innovative low-cost seismic isolator. Sci. China Technol. Sci. 57, 2050–2061 (2014). https://doi.org/10.1007/s11431-014-5662-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-014-5662-6