Abstract
In this paper, a compact ultra-wideband (UWB) microstrip-fed printed monopole antenna with triple band-notched characteristics is proposed. The proposed design consists of a radiating patch with two bevels at the bottom edge and the modified ground plane with two bevels of its upper edge to cause the wideband from 3.1 to 10.6 GHz for UWB application. Additionally, a triangular cut is introduced at the upper edge of the ground plane for improving the impedance matching beyond 6 GHz. The band notch at 3.4 GHz is achieved with a pair of slots along patch length and placed symmetrically on both the sides of the patch whereas notch band at 5.2 GHz is achieved using complementary split ring resonator (CSRR) on the patch. The third notch frequency at 5.8 GHz also achieved by using a pair of CSRR on the ground plane. The antenna size is 24 mm × 34.6 mm and designed using FR4 substrate having εr = 4.4 and thickness of 0.8 mm. Design and optimizations have been carried out using HFSS v13.0 and there is good agreement with measured results. The proposed antenna exhibits a nearly omni-directional radiation pattern in the H-plane, and a dipole-like radiation pattern in the E-plane for the entire pass band.
Similar content being viewed by others
References
Federal Communications Commission. First report and order. Revision of part 15 of the commission’s rules regarding ultra-wideband transmission systems, Feb 2002.
Elsheakh, D. N., Elsadek, H. A., Abdallah, E. A., Elhenawy, H., & Iskander, M. F. (2009). Enhancement of microstrip monopole antenna bandwidth by using EBG structures. IEEE Antennas Wireless Propagation Letters, 8, 959–962.
Song, K., Yin, Y.-Z., Fan, S.-T., Wang, Y.-Z., & Zhang, L. (2009). Open L-slot antenna with rotated rectangular patch for bandwidth enhancement. Electronics Letters, 45(25), 1286–1288.
Oraizi, H., & Hedayati, S. (2011). Miniaturized UWB monopole microstrip antenna design by the combination of Giusepe Peano and Sierpinski Carpet fractals. IEEE Antennas and Wireless Propagation Letters, 10, 67–70.
Sarkar, M., Dwari, S., & Daniel, A. (2013). Compact printed monopole antenna for ultra-wideband application with dual band-notched characteristics. Microwave and Optical Technology Letters, 55(11), 2595–2600.
Zhang, K., Li, Y., & Lang, Y. (2010). Band-notched UWB printed monopole antenna with a novel segmented circular patch. IEEE Antennas and Wireless Propagation Letters, 9, 1209–1212.
Jang, J.-W., & Hwang, H.-Y. (2009). An improved band rejection UWB antenna with resonant patches and a slot. IEEE Antennas and Wireless Propagation Letters, 8, 299–302.
Luo, L., Cui, Z., Xiong, J.-P., Zhang, X.-M., & Jiao, Y.-C. (2008). Compact printed ultra-wideband monopole antenna with dual band-notch characteristic. Electronics Letters, 44(19), 1106–1107.
Trang, N. D., Lee, D. H., & Park, H. C. (2008). Compact printed CPW-fed monopole ultra-wideband antenna with triple subband notched characteristics. Electronics Letters, 46(17), 1177–1179.
Abdvllahvand, M., Dadashzadeh, G., & Mostafa, D. (2010). Compact dual band-notched printed monopole antennafor UWB application. IEEE Antennas and Wireless Propagation Letters, 9, 1148–1151.
Hong, C.-Y., Ling, C.-W., Tarn, I.-Y., & Chung, S.-J. (2007). Design of a planar ultrawideband antenna with a new band-notch structure. IEEE Transactions on Antennas and Propagation, 55, 3391–3397.
Li, Y. S., Yang, X. D., Liu, C. Y., & Jiang, T. (2010). Compact CPW-fed ultra-wideband antenna with band-notched characteristic. Electronics Letters, 46(23), 1533–1534.
Deng, J. Y., Yin, Y. Z., Zhou, S. G., & Liu, Q. Z. (2008). Compact ultrawideband antenna with tri-band notched characteristic. Electronics Letters, 44(21), 1231–1233.
Li, W. T., Hei, Y. Q., Feng, W., & Shi, X. W. (2012). Planar antenna for 3G/Bluetooth/WiMAX and UWB applications with dual band-notched characteristics. IEEE Antennas and Wireless Propagation Letters, 11, 61–64.
Lin, C.-C., Jin, P., & Ziolkowski, R. W. (2012). Single, dual and tri-band-notched ultrawideband (UWB) antennas using capacitively loaded loop (CLL) resonators. IEEE Transactions on Antennas and Propagation, 60, 102–109.
Trang, N. D., Lee, D. H., & Park, H. C. (2011). Design and analysis of compact printed triple band-notched UWB antenna. IEEE Antennas and Wireless Propagation Letters, 10, 403–406.
Wong, K. L., Chi, Y. W., Su, C. M., & Chang, F. S. (2005). Band-notched ultra-wideband circular-disk monopole antenna with an arc-shaped slot. Microwave and Optical Technology Letters, 45(3), 188–191.
Nguyen, D. T., Lee, D. H., & Park, H. C. (2012). Very compact printed triple band-notched UWB antenna with quarter-wavelength slots. IEEE Antennas and Wireless Propagation Letters, 11, 411–414.
Kim, D. O., Jo, N. I., Choi, D. M., & Kim, C.-Y. (2009). Design of the ultra-wideband antenna with 5.2 GHz/5.8 GHz band rejection using rectangular split-ring resonators (SRRs) loading. Journal of Electromagnetic Waves and Applications, 23(17–18), 2503–2512.
Baena, J. D., Bonache, J., Martin, F., Sillero, R. M., Falcone, F., Lopetegi, T., et al. (2005). Equivalent-circuit models for split ring resonators and complementary split-ring resonators coupled to planar transmission lines. IEEE Transactions on Microwave Theory Techniques, 53, 1451–1461.
Bonache, J., Gil, M., García-García, J., & Martín, F. (2006). On the electrical characteristics of complementary metamaterial resonators. IEEE Microwave and Wireless Components Letters, 16, 543–545.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sarkar, M., Dwari, S. & Daniel, A. Printed Monopole Antenna for Ultra-Wideband Application with Tunable Triple Band-Notched Characteristics. Wireless Pers Commun 84, 2943–2954 (2015). https://doi.org/10.1007/s11277-015-2774-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11277-015-2774-7