Oligomerization of endo-dicyclopentadiene using a mesoporous catalyst in a fixed-bed reactor

Abstract

The oligomerization of endo-dicyclopentadiene (endo-DCPD) over a mesoporous catalyst in a continuous-flow reactor at elevated pressure was studied to produce tricyclopentadiene (TCPD) and tetracyclopentadiene (TeCPD). The mesoporous material prepared from zeolite beta (MMZ_Hβ) was utilized as a catalyst. In addition, this study focused on the catalytic performance of the regenerated catalyst in comparison with the fresh catalyst. The TCPD and TeCPD were continuously produced through DCPD oligomerization over the MMZ_Hβ catalyst in a fixed bed reactor. At early time-on-stream, the conversion of endo-DCPD, the yield of TCPD and TeCPD, and the isomerization selectivity of TCPD in the fixed bed reactor were comparable to those in the batch-type reactor. The yield of oligomer containing TCPD and TeCPD decreased drastically from 28.5 % at 3 h time-on-stream to 21.5 % at 12 h time-on-stream, indicating that the catalyst was significantly deactivated. The in situ calcination in air flow at 500 °C was found to be effective for the regeneration of the used MMZ_Hβ catalyst.