Abstract
In this article we have used an optoelectrical model to explore the behavior of the bulk heterojunction solar cells. Using a polar monolayer before the cathode, an internal electric field is set up inside the organic solar cell and it is justified that this electric field reduces the recombination rate. Increasing the active layer thickness enhances the carrier recombination because of their long path to the electrodes. We show that the electric field of this monolayer permits the increasing of the device thickness and improves light harvesting. Thus the electron–hole generation rate and the short circuit current enhances with the increased mobility and the resulting possibility of exciton dissociation. By increasing the open circuit voltage and the fill factor of the solar cell, this polar monolayer causes a significant efficiency improvement up to 30 %.
Similar content being viewed by others
References
Apaydın, D.H., Yıldız, D.E., Cirpan, A., Toppare, L.: Optimizing the organic solar cell efficiency: role of the active layer thickness. Sol. Energy Mater. Sol. Cells 113, 100–105 (2013)
Arango, A.C., Johnson, L.R., Bliznyuk, V.N., Schlesinger, Z., Carter, S.A., Hörhold, H.H.: Efficient titanium oxide/conjugated polymer photovoltaics for solar energy conversion. Adv. Mater. 12(22), 1689–1692 (2000)
Asadi, K., de Bruyn, P., Blom, P.W., de Leeuw, D.M.: Origin of the efficiency enhancement in ferroelectric functionalized organic solar cells. Appl. Phys. Lett. 98(18), 183301 (2011)
Barker, J., Ramsdale, C., Greenham, N.: Modeling the current–voltage characteristics of bilayer polymer photovoltaic devices. Phys. Rev. B 67(7), 075205 (2003)
Brabec, C.J., Sariciftci, N.S., Hummelen, J.C.: Plastic solar cells. Adv. Funct. Mater. 11(1), 15–26 (2001)
Brabec, C.J., Shaheen, S.E., Winder, C., Sariciftci, N.S., Denk, P.: Effect of lif/metal electrodes on the performance of plastic solar cells. Appl. Phys. Lett. 80(7), 1288–1290 (2002)
Breeze, A., Schlesinger, Z., Carter, S., Brock, P.: Charge transport in tio 2/m e h-p p v polymer photovoltaics. Phys. Rev. B 64(12), 125205 (2001)
Eggenhuisen, T.M., Galagan, Y., Biezemans, A.F.K.V., Slaats, T.M.W.L., Voorthuijzen, W.P., Kommeren, S., Shanmugam, S., Teunissen, J.P., Hadipour, A., Verhees, W.J.H., Veenstra, S.C., Coenen, M.J.J., Gilot, J., Andriessen, R., Groen, W.A.: High efficiency, fully inkjet printed organic solar cells with freedom of design. J. Mater. Chem. A 3(14), 7255–7262 (2015)
Günes, S., Neugebauer, H., Sariciftci, N.S.: Conjugated polymer-based organic solar cells. Chem. Rev. 107(4), 1324–1338 (2007)
Halls, J.J.M., Walsh, C.A., Greenham, N.C., Marseglia, E.A., Friend, R.H., Moratti, S.C., Holmes, A.B.: Efficient photodiodes from interpenetrating polymer networks. Nature 376(6540), 498–500 (1995)
Hoppe, H., Sariciftci, N.S.: Organic solar cells: an overview. J. Mater. Res. 19(07), 1924–1945 (2004)
Kirchartz, T., Taretto, K., Rau, U.: Efficiency limits of organic bulk heterojunction solar cells. J. Phys. Chem. C 113(41), 17958–17966 (2009)
Koster, L., Mihailetchi, V., Blom, P.: Bimolecular recombination in polymer/fullerene bulk heterojunction solar cells. Appl. Phys. Lett. 88(5), 052104 (2006)
Krebs, F.C.: Fabrication and processing of polymer solar cells: a review of printing and coating techniques. Sol. Energy Mater. Sol. Cells 93(4), 394–412 (2009)
Krebs, F.C., Gevorgyan, S.A., Alstrup, J.: A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies. J. Mater. Chem. 19(30), 5442–5451 (2009)
Kroon, R., Lenes, M., Hummelen, J.C., Blom, P.W., De Boer, B.: Small bandgap polymers for organic solar cells (polymer material development in the last 5 years). Polym. Rev. 48(3), 531–582 (2008)
Lenes, M., Koster, L., Mihailetchi, V., Blom, P.: Thickness dependence of the efficiency of polymer: fullerene bulk heterojunction solar cells. Appl. Phys. Lett. 88(24), 243,502–243,502-3 (2006)
Li, Y., Zou, Y.: Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility. Adv. Mater. 20(15), 2952–2958 (2008)
Láska, M.: Application of plasmonics in organic photovoltaics. Thesis (2011)
Mandoc, M., Koster, L., Blom, P.: Optimum charge carrier mobility in organic solar cells. Appl. Phys. Lett. 90(13), 133504 (2007)
Marsh, R.A., Hodgkiss, J.M., Albert-Seifried, S., Friend, R.H.: Effect of annealing on p3ht: Pcbm charge transfer and nanoscale morphology probed by ultrafast spectroscopy. Nano Lett. 10(3), 923–930 (2010)
Moulé, A., Meerholz, K.: Minimizing optical losses in bulk heterojunction polymer solar cells. Appl. Phys. B 86(4), 721–727 (2007)
Nam, Y.M., Huh, J., Jo, W.H.: Optimization of thickness and morphology of active layer for high performance of bulk-heterojunction organic solar cells. Sol. Energy Mater. Sol. Cells 94(6), 1118–1124 (2010)
Natan, A., Zidon, Y., Shapira, Y., Kronik, L.: Cooperative effects and dipole formation at semiconductor and self-assembled-monolayer interfaces. Phys. Rev. B 73(19), 193310 (2006)
Natan, A., Kronik, L., Haick, H., Tung, R.T.: Electrostatic properties of ideal and nonideal polar organic monolayers: implications for electronic devices. Adv. Mater. 19(23), 4103–4117 (2007)
Nunzi, J.M.: Organic photovoltaic materials and devices. C.R. Phys. 3(4), 523–542 (2002)
Pacios, R., Bradley, D.: Charge separation in polyflourene composites with internal donor/acceptor heterojunctions. Synth. Met. 127(1), 261–265 (2002)
Pettersson, L.A., Roman, L.S., Inganas, O.: Modeling photocurrent action spectra of photovoltaic devices based on organic thin films. J. Appl. Phys. 86(1), 487–496 (1999)
Po, R., Maggini, M., Camaioni, N.: Polymer solar cells: recent approaches and achievements. J. Phys. Chem. C 114(2), 695–706 (2009)
Scharber, M., Sariciftci, N.: Efficiency of bulk-heterojunction organic solar cells. Prog. Polym. Sci. 38(12), 1929–1940 (2013)
Schilinsky, P., Waldauf, C., Hauch, J., Brabec, C.J.: Simulation of light intensity dependent current characteristics of polymer solar cells. J. Appl. Phys. 95(5), 2816–2819 (2004)
Schuegraf, K.F., Hu, C.: Hole injection SiO2 breakdown model for very low voltage lifetime extrapolation. IEEE Trans. Electron. Dev. 41(5), 761–767 (1994)
Sentein, C., Fiorini, C., Lorin, A., Nunzi, J.-M.: Molecular rectification in oriented polymer structures. Adv. Mater. 9(10), 809–811 (1997)
Shaheen, S.E., Brabec, C.J., Sariciftci, N.S., Padinger, F., Fromherz, T., Hummelen, J.C.: 2.5 % Efficient organic plastic solar cells. Appl. Phys. Lett. 78(6), 841–843 (2001)
Shaw, P.E., Ruseckas, A., Samuel, I.D.: Exciton diffusion measurements in poly(3-hexylthiophene). Adv. Mater. 20(18), 3516–3520 (2008)
Shieh, J.T., Liu, C.H., Meng, H.F., Tseng, S.R., Chao, Y.C., Horng, S.F.: The effect of carrier mobility in organic solar cells. J. Appl. Phys. 107(8), 084503 (2010)
Sicot, L., Fiorini, C., Lorin, A., Raimond, P., Sentein, C., Nunzi, J.-M.: Improvement of the photovoltaic properties of polythiophene-based cells. Sol. Energy Mater. Sol. Cells 63(1), 49–60 (2000)
Street, R.: Carrier mobility, structural order, and solar cell efficiency of organic heterojunction devices. Appl. Phys. Lett. 93(13), 133308 (2008)
Sun, S.S., Sariciftci, N.S.: Organic photovoltaics: mechanisms, materials, and devices, 119–140. CRC Press, Boca Raton (2010)
Yu, G., Gao, J., Hummelen, J.C., Wudl, F., Heeger, A.J.: Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions. Sci. AAAS Wkly. Pap. Ed. 270(5243), 1789–1790 (1995)
Yuan, Y., Reece, T.J., Sharma, P., Poddar, S., Ducharme, S., Gruverman, A., Yang, Y., Huang, J.: Efficiency enhancement in organic solar cells with ferroelectric polymers. Nat. Mater. 10(4), 296–302 (2011)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sadoogi, N., Rostami, A., Dolatyari, M. et al. Application of dipole mono-layers for efficiency improvement in organic solar cells. Opt Quant Electron 47, 3871–3882 (2015). https://doi.org/10.1007/s11082-015-0255-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11082-015-0255-6