Abstract
Separated core/shell SmCo5/Sm2O3 composite magnetic nanoparticles have been fabricated by a mechanochemical process, heat treatment and washing in this study. Phases, microstructure, particle sizes, and magnetic properties of the as-synthesized SmCo5 and SmCo5/Sm2O3 nanoparticles and the influence of annealing temperature and time have been investigated. The results showed that the annealing temperatures had great effects on particle sizes and magnetic properties while annealing time had a little effect on the particle size of the annealed SmCo5 nanoparticles. The average particle sizes of the annealed SmCo5 nanoparticles changed from 176 to 362 nm when the annealing temperatures increased from 450 to 650 °C and annealing time was 1 h. The coercivity of the synthesized SmCo5 nanoparticles annealed at 450 °C for 1 h was 21 kOe. It increased with the increase of annealing temperatures and reached a maximum value of 35.5 kOe at 600 °C and then decreased. It is interesting to find that the core/shell SmCo5/Sm2O3 hard magnetic nanoparticles were formed after washing with ethanol and acetic acid aqueous solution. Magnetic measurements of these particles exhibited a higher coercivity of 23.7 kOe. The SmCo5 core reserves a single-crystal structure and a 68–75 nm size while the Sm2O3 has a thickness of 5 nm.
References
Chakka VM, Altuncevahir B, Jin ZQ, Li Y, Liu JP (2006) Magnetic nanoparticles produced by surfactant-assisted ball milling. J Appl Phys 99:08E912. doi:10.1063/1.2170593
Gu H, Xu B, Rao J et al (2003) Chemical synthesis of narrowly dispersed SmCo5 nanoparticles. J Appl Phys 93:7589. doi:10.1063/1.1537697
Hong JH, Kim WS, Li JI, Hur NH (2007) Exchange coupled magnetic nanocomposites of Sm(Co1−x Fe x )5/Fe3O4 with core/shell structure. Solid State Commun 141:541–544. doi:10.1016/j.ssc.2006.12.030
Kirkpatrick EM, Majetich SA, Mchenry ME (1996) Magnetic properties of single domain samarium cobalt nanoparticles. IEEE Trans Magn 32:4502–4504. doi:10.1109/20.538911
Liu W, McCormick PG (1999a) Synthesis of Sm2Co17 alloy nanoparticles by mechanochemical processing. J Magn Magn Mater 195:L279–L283. doi:10.1016/S0304-8853(99)00064-5
Liu W, McCormick PG (1999b) Formation and magnetic properties of nanosized Sm2Co17 magnetic particles via mechanochemical/thermal processing. Nanostruct Mater 12:187–190. doi:10.1016/S0965-9773(99)00095-1
Matsushita T, Masuda J, Iwamoto T, Toshima N (2007) Fabrication of SmCo x nanoparticles as a potential candidate of materials for super-high-density magnetic memory: use of gold as the third element. Chem Lett 36:1264–1265. doi:10.1246/cl.2007.1264
Ono K, Kakefuda Y, Okuda R, Ishii Y, Kamimura S, Kitamura A, Oshima M (2002) Organometallic synthesis and magnetic properties of ferromagnetic Sm–Co nanoclusters. J Appl Phys 91:8480. doi:10.1063/1.1456407
Poudyal N, Rong C, Liu JP (2010) Effects of particle size and composition on coercivity of Sm–Co nanoparticles prepared by surfactant-assisted ball milling. J Appl Phys 107:09A703. doi:10.1063/1.3334460
Teng X, Yang H (2007) Iron oxides shell as the oxidation-resistant layer in SmCo5@Fe2O3 core–shell magnetic nanoparticles. J Nanosci Nanotechnol 7:356–361. doi:10.1166/jnn.2007.020
Wang Y, Li Y, Rong C, Liu JP (2007) Sm–Co hard magnetic nanoparticles prepared by surfactant-assisted ball milling. Nanotechnology 18:465701. doi:10.1088/0957-4484/18/46/465701
Zheng L, Cui B, Li W, Hadjipanayis GC (2012) Separated Sm–Co hard nanoparticles by an optimization of mechanochemical processes. J Appl Phys 111:07B536. doi:10.1063/1.3679092
Acknowledgments
This study was financially supported by “The Talent Project” of Hebei Province (China).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zheng, L., Cui, B., Zhao, L. et al. Core/shell SmCo5/Sm2O3 magnetic composite nanoparticles. J Nanopart Res 14, 1129 (2012). https://doi.org/10.1007/s11051-012-1129-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11051-012-1129-5