Comparative studies are provided for the effect of heating conditions for directional crystallization in two types of unit: with liquid-metal cooling (unit UVNK-9A), i.e., LMC process, and with radiation cooling (unit of the firm ALD), i.e., high rate solidification (HRC) process, on VKNA-4UMono alloy cast structure parameters. Comparative analysis is provide for microstructure and strength properties obtained with short-term tensile tests for castings of alloy VKNA-4UMono [111] from both units.
Similar content being viewed by others
Notes
According to I. V. Iskhodzhanova data.
References
O. A. Bazyleva, E. G. Arginbaeva, and E. G. Turenko, “Cast intermetallic superalloys,” in: Aviation Materials and Technologies: Jubilee Sci.-Tech. Coll., Appendix to journal Aviation Materials and Technologies, VIAM, Moscow (2012), pp. 57–60.
E. N. Kablov (ed.), Gas Turbine Engine Cast Blades: Alloys, Technology, Coatings [in Russian], Nauka, Moscow (2006).
R. E. Shalin (ed.), Superalloys II [in Russian], Metallurgiya, Moscow (1995).
U. Betz, F. Hugo, and H. Mayer, Improvement in DS/SC Precision Casting, ALD Vacuum Technologies Technical Information (2001).
S. S. Gorelik, L. N. Rastorguev, and Yu. A. Skakov, x-Ray and Electron-Optical Analysis [in Russian], Metallurgiya, Moscow (1970).
I. N. Roshchina, A. I. Krivko, and A. I. Samoilov, “Structural material research methods: coll. work,” Aviats. Materialy, VIAM (1987), pp. 141–146.
Alloy VKNA-4U Certificate, No. 1598 (1988).
O. A. Bazyleva, A. V. Goryunov, T. N. Zagvozdkina, and D. G. Nefedov, “Evaluation of the effect of liquation inhomogeneity for alloy VKNA-4U on its structure and properties,” Metall. Mashinostr., No. 3, 18–21 (2012).
O. G. Ospennikova, “Development strategy for superalloys and steels for special purposes, protective, and heat insulation coatings,” in: Aviation Materials and Technologies: Jubilee Sci.-Tech. Coll., Appendix to journal Aviation Materials and Technologies, VIAM, Moscow (2012), pp. 19–36.
I. L. Svetlov, R. A. Kuleshova, V. P. Monastyrskii, et al., “Effect of directional crystallization on phase composition and dispersion of nickel alloy dendrite structure,” Izv. Akad. Nauk SSSR, Metally, No. 1, 86–93 (1990).
M. McLean, Directional Solidified Materials for High Temperature Service, The Metals Society, London (1983).
M. Flemings, Solidification Processes [Russian translation], Mir, Moscow (1977).
Author information
Authors and Affiliations
Corresponding author
Additional information
O. A. Bazyleva, O. B. Timofeeva, D. G. Nefedov, E. Yu. Turenko, and N. A. Kuzmina took part in the work.
Translated from Metallurg, No. 11, pp. 99–104, November, 2013.
Rights and permissions
About this article
Cite this article
Visik, E.M., Gerasimov, V.V. Study of the Effect of Heating Conditions During Directional Crystallization on Structural Parameters of Intermetallic VKNA-4UMono Alloy. Metallurgist 57, 1036–1042 (2014). https://doi.org/10.1007/s11015-014-9841-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11015-014-9841-2