Abstract
Movement of a body inside a resistive medium can be based on special vibrational motions of internal masses contained within this body. This principle of movement does not require any external devices such as wheels, legs, or tracks interacting with the outer environment; the system can be hermetic. This type of mobile systems sometimes called vibro-robots or capsubots can be useful for motions inside hazardous or vulnerable media and inside tubes. In the literature, one-dimensional motions of such systems were studied in various resistive media. In the paper, two-dimensional motions of a multibody mobile system carrying internal masses are analyzed in the presence of dry friction forces acting between the system and the horizontal plane. It is shown that, under certain conditions, this system can be brought from any initial position to the prescribed terminal position in the plane. The algorithm of motion is described and specified.
Similar content being viewed by others
References
Breguet J-M, Clavel R (1998) Stick and slip actuators: design, control, performances and applications. In: Proceeding of international symposium micromechatronics and human science (MHS). IEEE, New York, pp 89–95
Fidlin F, Thomsen JJ (2001) Predicting vibration-induced displacement for a resonant friction slider. Eur J Mech A/Solids. 20(1):155–166
Zimmermann K, Zeidis I, Behn C (2009) Mechanics of terrestrial locomotion. Springer, Berlin
Schmoeckel F, Worn H (2001) Remotely controllable mobile microrobots acting as nano positioners and intelligent tweezers in scanning electron microscopes (SEMs). In: Proceeding of international conference robotics and automation. IEEE, New York, pp 3903–3913
Lampert P, Vakebtutu A, Lagrange B, De Lit P, Delchambre A (2003) Design and performances of a one-degree-of-freedom guided nano-actuator. Robot Comput Integr Manuf 19(1–2):89–98
Vartholomeos P, Papadopoulos E (2006) Dynamics, design and simulation of a novel micro-robotic platform employing vibration microactuators. J Dyn Syst Meas Control 128(1):122–133
Gradetsky V, Solovtsov V, Kniazkov M, Rizzotto GG, Amato P (2003) Modular design of electro-magnetic mechatronic microrobots. In: Proceedings of 6th international conference climbing and walking robots (CLAWAR), pp 651–658
Chernousko FL (2005) On the motion of a body containing movable internal mass. Dokl Phys 50(11):593–597
Chernousko FL (2006) Analysis and optimization of the motion of a body controlled by a movable internal mass. J Appl Math Mech 70(6):915–941
Figurina TYu (2007) Optimal motion control for system of two bodies on a straight line. J Comput Syst Sci Int 46(2):227–233
Chernousko FL (2008) The optimal periodic motions of a two-mass system in resistant medium. J Appl Math Mech 72(2):116–125
Bolotnik NN, Figurina TY (2008) Optimal control of the rectilinear motion of a rigid body on a rough plane by the displacement of two internal masses. J Appl Math Mech 72(2):126–135
Bolotnik NN, Figurina TYu, Chernousko FL (2012) Optimal control of the rectilinear motion of a two-body system in a resistive medium. J Appl Math Mech 76(1):1–14
Li H, Firuta K, Chernousko FL (2005) A pendulum-driver cart via internal force and static friction. In: Proceeding of international conference physics and control. St. Petersburg, Russia, pp 15–17
Li H, Firuta K, Chernousko FL (2006) Motion generation of the Capsubot using internal force and static friction. In: Proceeding of the 45th IEEE conference decision and control. San Diego, USA, pp 6575–6580
Acknowledgments
The work was supported by the Russian Foundation for Basic Research (Projects 14-01-00061 and 15-51-12381).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chernousko, F. Two-dimensional motions of a body containing internal moving masses. Meccanica 51, 3203–3209 (2016). https://doi.org/10.1007/s11012-016-0511-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11012-016-0511-2